Re: [PATCH] spi: Fix error paths on txx9spi_probe

[David Brownell <david-b@pacbell.net>]

On Thursday 08 November 2007, Atsushi Nemoto wrote:
> Some error paths in txx9spi_probe wrongly return 0.  This patch fixes
> them by using the devres interfaces.
> 
> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>

ACK

> ---
>  drivers/spi/spi_txx9.c |   40 ++++++++++++++++++++--------------------
>  1 files changed, 20 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
> index cc5094f..363ac8e 100644
> --- a/drivers/spi/spi_txx9.c
> +++ b/drivers/spi/spi_txx9.c
> @@ -24,6 +24,7 @@
>  #include <linux/spi/spi.h>
>  #include <linux/err.h>
>  #include <linux/clk.h>
> +#include <linux/io.h>
>  #include <asm/gpio.h>
>  
>  
> @@ -74,7 +75,6 @@ struct txx9spi {
>  	struct list_head queue;
>  	wait_queue_head_t waitq;
>  	void __iomem *membase;
> -	int irq;
>  	int baseclk;
>  	struct clk *clk;
>  	u32 max_speed_hz, min_speed_hz;
> @@ -350,12 +350,12 @@ static int __init txx9spi_probe(struct platform_device *dev)
>  	struct resource *res;
>  	int ret = -ENODEV;
>  	u32 mcr;
> +	int irq;
>  
>  	master = spi_alloc_master(&dev->dev, sizeof(*c));
>  	if (!master)
>  		return ret;
>  	c = spi_master_get_devdata(master);
> -	c->irq = -1;
>  	platform_set_drvdata(dev, master);
>  
>  	INIT_WORK(&c->work, txx9spi_work);
> @@ -381,32 +381,36 @@ static int __init txx9spi_probe(struct platform_device *dev)
>  
>  	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
>  	if (!res)
> -		goto exit;
> -	c->membase = ioremap(res->start, res->end - res->start + 1);
> +		goto exit_busy;
> +	if (!devm_request_mem_region(&dev->dev,
> +				     res->start, res->end - res->start + 1,
> +				     "spi_txx9"))
> +		goto exit_busy;
> +	c->membase = devm_ioremap(&dev->dev,
> +				  res->start, res->end - res->start + 1);
>  	if (!c->membase)
> -		goto exit;
> +		goto exit_busy;
>  
>  	/* enter config mode */
>  	mcr = txx9spi_rd(c, TXx9_SPMCR);
>  	mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
>  	txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
>  
> -	c->irq = platform_get_irq(dev, 0);
> -	if (c->irq < 0)
> -		goto exit;
> -	ret = request_irq(c->irq, txx9spi_interrupt, 0, dev->name, c);
> -	if (ret) {
> -		c->irq = -1;
> +	irq = platform_get_irq(dev, 0);
> +	if (irq < 0)
> +		goto exit_busy;
> +	ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
> +			       "spi_txx9", c);
> +	if (ret)
>  		goto exit;
> -	}
>  
>  	c->workqueue = create_singlethread_workqueue(master->dev.parent->bus_id);
>  	if (!c->workqueue)
> -		goto exit;
> +		goto exit_busy;
>  	c->last_chipselect = -1;
>  
>  	dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
> -		 (unsigned long long)res->start, c->irq,
> +		 (unsigned long long)res->start, irq,
>  		 (c->baseclk + 500000) / 1000000);
>  
>  	master->bus_num = dev->id;
> @@ -418,13 +422,11 @@ static int __init txx9spi_probe(struct platform_device *dev)
>  	if (ret)
>  		goto exit;
>  	return 0;
> +exit_busy:
> +	ret = -EBUSY;
>  exit:
>  	if (c->workqueue)
>  		destroy_workqueue(c->workqueue);
> -	if (c->irq >= 0)
> -		free_irq(c->irq, c);
> -	if (c->membase)
> -		iounmap(c->membase);
>  	if (c->clk) {
>  		clk_disable(c->clk);
>  		clk_put(c->clk);
> @@ -442,8 +444,6 @@ static int __exit txx9spi_remove(struct platform_device *dev)
>  	spi_unregister_master(master);
>  	platform_set_drvdata(dev, NULL);
>  	destroy_workqueue(c->workqueue);
> -	free_irq(c->irq, c);
> -	iounmap(c->membase);
>  	clk_disable(c->clk);
>  	clk_put(c->clk);
>  	spi_master_put(master);
> 


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/