You are right, seems no dma lines in adapter. hda=nodma helped, no errors
anymore. I will try now also libata_dma_mask and will mail result. Btw there
is no notes in Documentation/kernel-parameters.txt about it.
In any case it is complete board, WRAP.2C made by PCEngines in 2003. Kind of
popular and mass produced, before was widely used by StarOS, probably known
GPL violator, who didn't bother himself to supply patches, but at same time
used it in his projects.
If it is valid for all board with this revision, maybe it is better to put it
in some kind of fixup/quirk/black list, or how it is called?
On Wed, 07 Nov 2007 19:41:15 -0600, Robert Hancock wrote
> Denys wrote:
> > Finally i got full DMESG with 1GB card till end. Seems not readable too.
> >
>
> ...
>
> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
in
> > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> > ata1.00: status: { DRDY }
> > ata1: soft resetting link
> > ata1.00: configured for MWDMA1
> > sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
> > sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
> > Descriptor sense data with sense descriptors (in hex):
> > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> > 00 00 00 00
> > sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
> > end_request: I/O error, dev sda, sector 0
> > Buffer I/O error on device sda, logical block 0
> > ata1: EH complete
>
> I'm guessing that your CF-to-IDE adapter doesn't have the correct
> lines wired up for DMA to work properly, and the card indicates DMA
> support, which libata tries to use but which doesn't work. It looks
> like it never tried falling back to PIO after DMA failed. Seems like
> a deficiency in the speed-down logic?
>
> --
> Robert Hancock Saskatoon, SK, Canada
> To email, remove "nospam" from [email protected]
> Home Page: http://www.roberthancock.com/
--
Denys Fedoryshchenko
Technical Manager
Virtual ISP S.A.L.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
