Denys Fedoryshchenko wrote:
> On Tue, 6 Nov 2007 22:15:21 -0800, Andrew Morton wrote
>>> On Thu, 1 Nov 2007 23:30:13 +0200 "Denys" <[email protected]> wrote:
>>> Finally i got full DMESG with 1GB card till end. Seems not readable too.
>>> scsi0 : sc1200
>>> scsi1 : sc1200
>>> ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>>> ata2: DUMMY
>>> ata1.00: CFA: SanDisk SDCFH-1024, HDX 3.07, max MWDMA2
>>> ata1.00: 2001888 sectors, multi 0: LBA
>>> ata1.00: configured for MWDMA2
>>> scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-10 HDX PQ: 0
> ANSI: 5
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support
>>> DPO or FUA
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support
>>> DPO or FUA
>>> sda:<4>Clocksource tsc unstable (delta = -334501841 ns)
>>> Time: pit clocksource has been installed.
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: limiting speed to MWDMA1:PIO4
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>> 00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096
> in
>>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>> 00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>> unable to read partition table
>>> sd 0:0:0:0: [sda] Attached SCSI removable disk
>>> scx200_wdt: timer margin 60 seconds
>>> cpuidle: using governor ladder
>>> enabling scx200 high-res timer (1 MHz +0 ppm)
>>> TCP cubic registered
>>> Time: scx200_hrt clocksource has been installed.
>>> NET: Registered protocol family 1
>>> NET: Registered protocol family 17
>>> Using IPI Shortcut mode
>>> VFS: Cannot open root device "<NULL>" or unknown-block(8,18)
>>> Please append a correct "root=" boot option; here are the available
>>> partitions:
>>> 0800 1000944 sda driver: sd
>>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-
>>> block(8,18)
>>>
>> (+linux-ide)
(+alan, tejun)
>> So this has never worked on any known kernel?
>
> It is working now on old ide code (not libata).
Can you post the dmesg and hdparm -I of a working boot using the old ide
code? The thing that stuck out to me (as just a reader of linux-ide) was
that the problem involves MWDMA and CF, which have had problems (although
not the same as this one) in the past:
http://thread.gmane.org/gmane.linux.ide/22058 and
http://thread.gmane.org/gmane.linux.ide/22400
--
James Andrewartha
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
