Re: Strange freezes (seems like SATA related)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Andrew Morton wrote:
> On Mon, 29 Oct 2007 09:54:27 -0700
> Max Krasnyansky <[email protected]> wrote:
> 
>> A couple of HP xw9300 machines (dual Opterons) started freezing up.
>> We're running on 2.6.22.1 on them. Freezes a somewhere weird. VGA console is alive
>> (I can switch vts, etc) but everything else is dead (network, etc).
>> Unfortunately SYSRQ was not enabled and I could not get backtraces and stuff.
>>
>> Hooked up serial console and the only error that shows up is this.
>>
>> ata1: EH in ADMA mode, notifier 0x1 notifier_error 0x0 gen_ctl 0x1581000 status 0x1540 next cpb count 0x0 next cpb idx 0x0
>> ata1: CPB 0: ctl_flags 0xd, resp_flags 0x1
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> ata1.00: cmd ca/00:08:57:00:80/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out
>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>> Descriptor sense data with sense descriptors (in hex):
>> end_request: I/O error, dev sda, sector 8388695
>> Buffer I/O error on device sda1, logical block 1048579
>> lost page write due to I/O error on sda1
>> sd 0:0:0:0: [sda] Write Protect is off
>>
>> I see a bunch of those and then the box just sits there spewing this periodically
>>
>> ata1: EH in ADMA mode, notifier 0x1 notifier_error 0x0 gen_ctl 0x1581000 status 0x1540 next cpb count 0x0 next cpb idx 0x0
>> ata1: CPB 0: ctl_flags 0xd, resp_flags 0x1
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> ata1.00: cmd ca/00:08:4f:00:f8/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>
>> SMART selftest on the drive passed without errors.
>>
>> Here is how this machine looks like
>>
>> ...
> 
> So this happens on more than one machine?
Yep.

> The kernel shouldn't freeze, so even if both machines have magically
> identical hardware faults, there's a kernel bug there somewhere.
> 
> I guess it would be useful to test a 2.6.23 kernel if poss.  We've seen a
> very large number of reports like this one in recent months (many of which
> have not been responded to, btw) and perhaps someone has done something
> about them.
I may not be able to run identical workload on 2.6.23. Will try to give it a shot
sometime next week. Also I've upgraded to 2.6.22.10 last week. There are a few fixes 
in there that may potentially affect those boxes.

Max



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux