Re: mm snapshot broken-out-2007-11-06-02-32.tar.gz uploaded - build failure - rpadlpar_sysfs

[Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>]

On Tue, Nov 06, 2007 at 10:19:28AM -0800, Badari Pulavarty wrote:
> On Tue, 2007-11-06 at 21:04 +0530, Kamalesh Babulal wrote:
> > Hi Andrew,
> > 
> > The build fails with following error
> >  
> >   CC      drivers/pci/hotplug/rpadlpar_sysfs.o
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not constant
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for `dlpar_io_kset.kobj.parent')
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: initializer element is not constant
> > drivers/pci/hotplug/rpadlpar_sysfs.c:133: error: (near initialization for `dlpar_io_kset.kobj')
> > drivers/pci/hotplug/rpadlpar_sysfs.c:134: error: unknown field `ktype' specified in initializer
> > drivers/pci/hotplug/rpadlpar_sysfs.c:134: warning: initialization from incompatible pointer type
> > make[3]: *** [drivers/pci/hotplug/rpadlpar_sysfs.o] Error 1
> > make[2]: *** [drivers/pci/hotplug] Error 2
> > make[1]: *** [drivers/pci] Error 2
> > make: *** [drivers] Error 2
> > 
> > The patch, gregkh-driver-kset-convert-pci-hotplug-to-use-kset_create_and_register.patch
> > is causing the build failure.
> 
> Here is the fix (against 24-rc1 mm-brokenout). Can you try it ?
> 
> Thanks,
> Badari

Hi Badari,

This patch fixes the buidl failure.

Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> 
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> 
---
 drivers/pci/hotplug/rpadlpar_sysfs.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Index: linux-2.6.24-rc1/drivers/pci/hotplug/rpadlpar_sysfs.c
===================================================================
--- linux-2.6.24-rc1.orig/drivers/pci/hotplug/rpadlpar_sysfs.c	2007-11-06 10:09:10.000000000 -0800
+++ linux-2.6.24-rc1/drivers/pci/hotplug/rpadlpar_sysfs.c	2007-11-06 10:11:33.000000000 -0800
@@ -129,14 +129,13 @@ struct kobj_type ktype_dlpar_io = {
 };

 struct kset dlpar_io_kset = {
-	.kobj = {.ktype = &ktype_dlpar_io,
-		 .parent = &pci_hotplug_slots_kset->kobj},
-	.ktype = &ktype_dlpar_io,
+	.kobj = {.ktype = &ktype_dlpar_io},
 };

 int dlpar_sysfs_init(void)
 {
 	kobject_set_name(&dlpar_io_kset.kobj, DLPAR_KOBJ_NAME);
+	dlpar_io_kset.kobj.parent = &pci_hotplug_slots_kset->kobj;
 	if (kset_register(&dlpar_io_kset)) {
 		printk(KERN_ERR "rpadlpar_io: cannot register kset for %s\n",
 				kobject_name(&dlpar_io_kset.kobj));


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/