Problems using quickcam_messenger on ARM (FYI)

Hello Kernel-Developer,

Module quickcam_messenger seems to be broken (tried 2.6.18 and 2.6.22)

on 2 different NSLU2 (ARM). Picture is attached. Same kernel and module can be used without any problems on x86 here. I don't have any ARM device beside the NSLU2, so I cannot check.

The solution was to use Christian Magnusson's quickcam module. Everything worked without any problem. Webcam is:

Bus 003 Device 005: ID 046d:08f0 Logitech, Inc. QuickCam Messenger

Best regards and thanks for your work!

Markus

Kernel is:
Linux secure 2.6.18-5-ixp4xx #1 Thu Oct 11 20:42:54 UTC 2007 armv5tel
GNU/Linux

Logs with quickcam_messenger:

Nov  5 13:35:54 secure kernel: Linux video capture interface: v2.00
Nov  5 13:35:54 secure kernel:
drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam
Messenger USB v0.01
Nov  5 13:35:54 secure kernel: videodev: "QCM USB Camera" has no release
callback. Please fix your driver for proper sysfs support, see
http://lwn.net/Articles/36850/
Nov  5 13:35:54 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
QCM on /dev/video0: canvas=320x240 videosize=320x240
Nov  5 13:35:55 secure kernel: input: QCM button as /class/input/input1
Nov  5 13:35:55 secure kernel: usbcore: registered new interface driver QCM
Nov  5 13:35:55 secure kernel: swapped image found
Nov  5 13:35:55 secure kernel: Image loaded to NPE-B Func:0, Rel: 2:1,
Status: 82c00000
Nov  5 13:35:55 secure kernel: usbcore: registered new interface driver
snd-usb-audio

Nov  5 13:36:13 secure motion: [0] Processing thread 0 - config file
/etc/motion/motion.conf
Nov  5 13:36:13 secure motion: [1] Thread is from /etc/motion/motion.conf
Nov  5 13:36:13 secure motion: [1] Thread started
Nov  5 13:36:13 secure motion: [1] Failed with YUV420P, trying YUV422
palette: Invalid argument
Nov  5 13:36:13 secure motion: [1] Failed with YUV422, trying RGB24
palette: Invalid argument
Nov  5 13:37:07 secure motion: [1] Motion terminating
Nov  5 13:37:07 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
Packet Statistics: Total=54784. Empty=0. Usage=100%%
Nov  5 13:37:07 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
Transfer Statistics: Transferred=41MB Usage=78%%
Nov  5 13:37:41 secure motion: [0] Processing thread 0 - config file
/etc/motion/motion.conf
Nov  5 13:37:41 secure motion: [1] Thread is from /etc/motion/motion.conf
Nov  5 13:37:41 secure motion: [1] Thread started
Nov  5 13:37:41 secure motion: [1] Failed with YUV420P, trying YUV422
palette: Invalid argument
Nov  5 13:37:41 secure motion: [1] Failed with YUV422, trying RGB24
palette: Invalid argument
Nov  5 13:37:46 secure motion: [1] sync error in proc 2011: Interrupted
system call
Nov  5 13:37:46 secure motion: [1] Motion terminating
Nov  5 13:37:46 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
Packet Statistics: Total=5024. Empty=0. Usage=100%%
Nov  5 13:37:46 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
Transfer Statistics: Transferred=3763KB Usage=74%%
Nov  5 13:38:09 secure kernel: usb 2-1: USB disconnect, address 2
Nov  5 13:38:09 secure kernel: drivers/media/video/usbvideo/usbvideo.c:
USB camera disconnected.

---

• Follow-Ups:
  • Re: Problems using quickcam_messenger on ARM (FYI)
    • From: Mauro Carvalho Chehab <[email protected]>

• Prev by Date: virtio config_ops refactoring
• Next by Date: Re: [RFC] [PATCH 3/3] Recursive mtime for ext3
• Previous by thread: virtio config_ops refactoring
• Next by thread: Re: Problems using quickcam_messenger on ARM (FYI)
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]