[added CC list]
On Tue, Nov 06, 2007 at 04:00:06PM +0800, Fengguang Wu wrote:
> On Mon, Nov 05, 2007 at 06:23:07PM +0000, David wrote:
> > I've been testing rc1 for a week or so, and about 25% of the time I'm
> > seeing Firefox and Thunderbird getting stuck in 'D' state as they startup.
> >
> > I've attached the output of Sysrq-T to this mail... system is a
> > dual-core AMD64, and files are on a RAID-1 root partition connected two
> > SATA disks on the on-board NVidia controller. I've had no problems
> > before .24 rc1
>
> David, thank you for the reporting.
>
> Could you try with the attached 4 patches? Two of them are expected to
> fix your problem, another two are debugging ones(in case the problem
> persists).
>
> Thank you,
> Fengguang
> Subject: reiserfs: fix writeback
>
> Reiserfs could leave newly created sub-page-size files in dirty state for ever.
> They cannot be synced to disk by pdflush routines or an explicit `sync' command.
> Only `umount' can do the trick.
>
> This is not a new issue in 2.6.23-git17. 2.6.23 is buggy in the same way.
>
> The direct cause is, the dirty page's PG_dirty is cleared on
> reiserfs_file_release(). Call trace:
>
> [<ffffffff8027e920>] cancel_dirty_page+0xd0/0xf0
> [<ffffffff8816d470>] :reiserfs:reiserfs_cut_from_item+0x660/0x710
> [<ffffffff8816d791>] :reiserfs:reiserfs_do_truncate+0x271/0x530
> [<ffffffff8815872d>] :reiserfs:reiserfs_truncate_file+0xfd/0x3b0
> [<ffffffff8815d3d0>] :reiserfs:reiserfs_file_release+0x1e0/0x340
> [<ffffffff802a187c>] __fput+0xcc/0x1b0
> [<ffffffff802a1ba6>] fput+0x16/0x20
> [<ffffffff8029e676>] filp_close+0x56/0x90
> [<ffffffff8029fe0d>] sys_close+0xad/0x110
> [<ffffffff8020c41e>] system_call+0x7e/0x83
>
> Fix the problem by simply removing the cancel_dirty_page() call.
>
>
> Here are more detailed demonstrations of the problem:
>
> 1) the page has both PG_dirty(D)/PAGECACHE_TAG_DIRTY(d) after being written to;
> and then only PAGECACHE_TAG_DIRTY(d) remains after the file is closed.
>
> ------------------------------ screen 0 ------------------------------
> [T0] root /home/wfg# cat > /test/tiny
> [T1] hi
> [T2] root /home/wfg#
>
> ------------------------------ screen 1 ------------------------------
> [T1] root /home/wfg# echo /test/tiny > /proc/filecache
> [T1] root /home/wfg# cat /proc/filecache
> # file /test/tiny
> # flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback
> # idx len state refcnt
> 0 1 ___UD__Bd_ 2
> [T2] root /home/wfg# cat /proc/filecache
> # file /test/tiny
> # flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback
> # idx len state refcnt
> 0 1 ___U___Bd_ 2
>
> 2) note the non-zero `cancelled_write_bytes' after /tmp/hi is copied.
>
> ------------------------------ screen 0 ------------------------------
> [T0] root /home/wfg# echo hi > /tmp/hi
> [T1] root /home/wfg# cp /tmp/hi /dev/stdin /test
> [T2] hi
> [T3] root /home/wfg#
>
> ------------------------------ screen 1 ------------------------------
> [T1] root /proc/4397# cd /proc/`pidof cp`
> [T1] root /proc/4713# cat io
> rchar: 8396
> wchar: 3
> syscr: 20
> syscw: 1
> read_bytes: 0
> write_bytes: 20480
> cancelled_write_bytes: 4096
> [T2] root /proc/4713# cat io
> rchar: 8399
> wchar: 6
> syscr: 21
> syscw: 2
> read_bytes: 0
> write_bytes: 24576
> cancelled_write_bytes: 4096
>
> Cc: Maxim Levitsky <[email protected]>
> Cc: Peter Zijlstra <[email protected]>
> Signed-off-by: Fengguang Wu <[email protected]>
> ---
> fs/reiserfs/stree.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> --- linux-2.6.24-git17.orig/fs/reiserfs/stree.c
> +++ linux-2.6.24-git17/fs/reiserfs/stree.c
> @@ -1458,9 +1458,6 @@ static void unmap_buffers(struct page *p
> }
> bh = next;
> } while (bh != head);
> - if (PAGE_SIZE == bh->b_size) {
> - cancel_dirty_page(page, PAGE_CACHE_SIZE);
> - }
> }
> }
> }
> From: Peter Zijlstra <[email protected]>
> Subject: mm: speed up writeback ramp-up on clean systems
>
> We allow violation of bdi limits if there is a lot of room on the
> system. Once we hit half the total limit we start enforcing bdi limits
> and bdi ramp-up should happen. Doing it this way avoids many small
> writeouts on an otherwise idle system and should also speed up the
> ramp-up.
>
> Signed-off-by: Peter Zijlstra <[email protected]>
> Signed-off-by: Fengguang Wu <[email protected]>
> ---
> mm/page-writeback.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> --- linux-2.6.24-git17.orig/mm/page-writeback.c
> +++ linux-2.6.24-git17/mm/page-writeback.c
> @@ -355,8 +355,8 @@ get_dirty_limits(long *pbackground, long
> */
> static void balance_dirty_pages(struct address_space *mapping)
> {
> - long bdi_nr_reclaimable;
> - long bdi_nr_writeback;
> + long nr_reclaimable, bdi_nr_reclaimable;
> + long nr_writeback, bdi_nr_writeback;
> long background_thresh;
> long dirty_thresh;
> long bdi_thresh;
> @@ -376,11 +376,26 @@ static void balance_dirty_pages(struct a
>
> get_dirty_limits(&background_thresh, &dirty_thresh,
> &bdi_thresh, bdi);
> +
> + nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
> + global_page_state(NR_UNSTABLE_NFS);
> + nr_writeback = global_page_state(NR_WRITEBACK);
> +
> bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
> bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
> +
> if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
> break;
>
> + /*
> + * Throttle it only when the background writeback cannot
> + * catch-up. This avoids (excessively) small writeouts
> + * when the bdi limits are ramping up.
> + */
> + if (nr_reclaimable + nr_writeback <
> + (background_thresh + dirty_thresh) / 2)
> + break;
> +
> if (!bdi->dirty_exceeded)
> bdi->dirty_exceeded = 1;
>
> ---
> mm/page-writeback.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> --- linux-2.6.23-rc8-mm2.orig/mm/page-writeback.c
> +++ linux-2.6.23-rc8-mm2/mm/page-writeback.c
> @@ -98,6 +98,26 @@ EXPORT_SYMBOL(laptop_mode);
>
> /* End of sysctl-exported parameters */
>
> +#define writeback_debug_report(n, wbc) do { \
> + __writeback_debug_report(n, wbc, __FILE__, __LINE__, __FUNCTION__); \
> +} while (0)
> +
> +void __writeback_debug_report(long n, struct writeback_control *wbc,
> + const char *file, int line, const char *func)
> +{
> + printk("%s %d %s: %s(%d) %ld "
> + "global %lu %lu %lu "
> + "wc %c%c tw %ld sk %ld\n",
> + file, line, func,
> + current->comm, current->pid, n,
> + global_page_state(NR_FILE_DIRTY),
> + global_page_state(NR_WRITEBACK),
> + global_page_state(NR_UNSTABLE_NFS),
> + wbc->encountered_congestion ? 'C':'_',
> + wbc->more_io ? 'M':'_',
> + wbc->nr_to_write,
> + wbc->pages_skipped);
> +}
>
> static void background_writeout(unsigned long _min_pages);
>
> @@ -404,6 +424,7 @@ static void balance_dirty_pages(struct a
> pages_written += write_chunk - wbc.nr_to_write;
> get_dirty_limits(&background_thresh, &dirty_thresh,
> &bdi_thresh, bdi);
> + writeback_debug_report(pages_written, &wbc);
> }
>
> /*
> @@ -568,6 +589,7 @@ static void background_writeout(unsigned
> wbc.pages_skipped = 0;
> writeback_inodes(&wbc);
> min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
> + writeback_debug_report(min_pages, &wbc);
> if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
> /* Wrote less than expected */
> if (wbc.encountered_congestion)
> @@ -643,6 +665,7 @@ static void wb_kupdate(unsigned long arg
> wbc.encountered_congestion = 0;
> wbc.nr_to_write = MAX_WRITEBACK_PAGES;
> writeback_inodes(&wbc);
> + writeback_debug_report(nr_to_write, &wbc);
> if (wbc.nr_to_write > 0) {
> if (wbc.encountered_congestion)
> congestion_wait(WRITE, HZ/10);
> Subject: track redirty_tail() calls
>
> It helps a lot to know how redirty_tail() are called.
>
> Cc: Ken Chen <[email protected]>
> Cc: Andrew Morton <[email protected]>
> Signed-off-by: Fengguang Wu <[email protected]>
> ---
> fs/fs-writeback.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> --- linux-2.6.24-git17.orig/fs/fs-writeback.c
> +++ linux-2.6.24-git17/fs/fs-writeback.c
> @@ -164,12 +164,26 @@ static void redirty_tail(struct inode *i
> list_move(&inode->i_list, &sb->s_dirty);
> }
>
> +#define requeue_io(inode) \
> + do { \
> + __requeue_io(inode, __LINE__); \
> + } while (0)
> +
> /*
> * requeue inode for re-scanning after sb->s_io list is exhausted.
> */
> -static void requeue_io(struct inode *inode)
> +static void __requeue_io(struct inode *inode, int line)
> {
> list_move(&inode->i_list, &inode->i_sb->s_more_io);
> +
> + printk(KERN_DEBUG "requeue_io %d: inode %lu size %llu at %02x:%02x(%s)\n",
> + line,
> + inode->i_ino,
> + i_size_read(inode),
> + MAJOR(inode->i_sb->s_dev),
> + MINOR(inode->i_sb->s_dev),
> + inode->i_sb->s_id
> + );
> }
>
> static void inode_sync_complete(struct inode *inode)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
