Re: VIA VT6307 OHCI version?

[Andreas Mohr <andim2@users.sourceforge.net>]

Hi,

On Sun, Oct 28, 2007 at 09:40:41PM +0100, Krzysztof Halasa wrote:
> Stefan Richter <stefanr@s5r6.in-berlin.de> writes:
> 
> >> Compile with the usual spell: gcc -Wall -O2 vt6307ohciver.c -o vt6307ohciver
> >
> > I also had to specify "-lpci" on Mandrake 10.1, "-lpci -lz" on Gentoo.
> 
> Of course you're right, just typed faster than thought.
> Actually I had to add these two on Fedora, too.

And in general the pciutils-dev package should be installed.

> Ok so it seems rev 80 is VT6307 and (at least) rev 46 is VT6306.
> I think my googling for lspci reports confirms that.

As does my card:

# lspci |grep 1394
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
root@andi:/tmp# ./vt6307ohciver 00:09.0
I/O region #1 is at A000
It seems your VT6307 chip is connected to 93c46 EEPROM
Page size is 4096 (0x1000) bytes
GUID PROM register address is 0xdb140004
Mapping 8 (0x8) bytes of memory at 0xdb140000
Mapped mem region #0 at virtual address 0xb7ee5000
GUID PROM register is at virtual address 0xb7ee5004

EEPROM dump:
00: 00 11 06 66 45 55 56 E1 04 04 32 55 F8 00 A2 02
10: A1 00 40 63 06 11 44 30 03 DF 40 80 00 20 00 73
20: 3C 10 00 00 00 00 FF FF FF FF FF FF FF FF FF FF

Your VT6307 chip is in OHCI 1.0 mode


And viewing from a quite problematic angle (card is in running PC,
difficult to view) strongly seems to indicate a VT630_6_ (the "6" is
quite clearly visible).
This means that I currently cannot offer any mfct. date data however,
unfortunately.

Andreas Mohr
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/