Hi,
I finished copying all data from old disc hdc to my shiny new
RAID5 array (/dev/hda3 /dev/sda3 missing). Next step is to create a
partition on hdc and add it to the array. And so I did this:
# mdadm --add /dev/md1 /dev/hdc3
But then I had a problem - the /dev/hdc3 was a spare, it didn't
resync automatically:
# mdadm -D /dev/md1
[....]
Number Major Minor RaidDevice State
0 3 3 0 active sync /dev/hda3
1 8 3 1 active sync /dev/sda3
2 0 0 2 removed
3 22 3 - spare /dev/hdc3
I wanted to tell mdadm to use the spare device, and I wasn't sure how
to do this, so I tried following:
# mdadm --stop /dev/md1
# mdadm --assemble --update=resync /dev/md1 /dev/hda3 /dev/sda3 /dev/hdc3
Now, 'mdadm -D /dev/md1' says:
[...]
Number Major Minor RaidDevice State
0 3 3 0 active sync /dev/hda3
1 8 3 1 active sync /dev/sda3
3 22 3 2 spare rebuilding /dev/hdc3
I'm writing here just because I want to be sure that I added this new
device correctly, I don't want to make any stupid mistake here...
# cat /proc/mdstat
md1 : active raid5 hda3[0] hdc3[3] sda3[1]
966807296 blocks super 1.1 level 5, 128k chunk, algorithm 2 [3/2] [UU_]
[=>...................] recovery = 6.2% (30068096/483403648) finish=254.9min speed=29639K/sec
bitmap: 8/8 pages [32KB], 32768KB chunk
Was there a better way to do this, is it OK?
--
Janek Kozicki |
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
