commit 4ae3f847e49e3787eca91bced31f8fd328d50496 did not get applied
correctly, presumably due to substantial similarities between
handle_stripe5 and handle_stripe6.
This patch (with lots of context) moves the chunk of new code from
handle_stripe6 (where it isn't needed (yet)) to handle_stripe5.
Signed-off-by: Neil Brown <[email protected]>
cc: "Dan Williams" <[email protected]>
---
The patch is correctly applied in -mm.
The same patch was sent to stable@ but doesn't seem to have made it yet.
When it does get applied, we should make sure it gets applied properly...
### Diffstat output
./drivers/md/raid5.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2007-11-02 12:10:49.000000000 +1100
+++ ./drivers/md/raid5.c 2007-11-02 12:25:31.000000000 +1100
@@ -2607,40 +2607,47 @@ static void handle_stripe5(struct stripe
struct bio *return_bi = NULL;
struct stripe_head_state s;
struct r5dev *dev;
unsigned long pending = 0;
memset(&s, 0, sizeof(s));
pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
"ops=%lx:%lx:%lx\n", (unsigned long long)sh->sector, sh->state,
atomic_read(&sh->count), sh->pd_idx,
sh->ops.pending, sh->ops.ack, sh->ops.complete);
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
+ /* clean-up completed biofill operations */
+ if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) {
+ clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+ clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
+ clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
+ }
+
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
struct r5dev *dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx toread %p read %p write %p "
"written %p\n", i, dev->flags, dev->toread, dev->read,
dev->towrite, dev->written);
/* maybe we can request a biofill operation
*
* new wantfill requests are only permitted while
* STRIPE_OP_BIOFILL is clear
*/
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
!test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
set_bit(R5_Wantfill, &dev->flags);
/* now count some things */
@@ -2880,47 +2887,40 @@ static void handle_stripe6(struct stripe
struct stripe_head_state s;
struct r6_state r6s;
struct r5dev *dev, *pdev, *qdev;
r6s.qd_idx = raid6_next_disk(pd_idx, disks);
pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
"pd_idx=%d, qd_idx=%d\n",
(unsigned long long)sh->sector, sh->state,
atomic_read(&sh->count), pd_idx, r6s.qd_idx);
memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
- /* clean-up completed biofill operations */
- if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
- clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
- clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
- }
-
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
/* maybe we can reply to a read */
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
struct bio *rbi, *rbi2;
pr_debug("Return read for disc %d\n", i);
spin_lock_irq(&conf->device_lock);
rbi = dev->toread;
dev->toread = NULL;
if (test_and_clear_bit(R5_Overlap, &dev->flags))
wake_up(&conf->wait_for_overlap);
spin_unlock_irq(&conf->device_lock);
while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
copy_data(0, rbi, dev->page, dev->sector);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
