On Thursday 01 November 2007 7:51:25 Alan Stern wrote:
> On Thu, 1 Nov 2007, Steven King wrote:
> > Per a suggestion by David Brownwell, rebuilt with CONFIG_USB_DEBUG
> > enabled and loading usbserial and ti_usb_3410_5052 with debug=1, I see in
> > 'dmesg'
> >
> > 'drivers/usb/serial/usb-serial.c: wrong number of endpoints'
> >
> > which is pretty much what I expected, throwing some more printk's in
> > usb-serial gives:
> >
> > drivers/usb/serial/usb-serial.c: num_interrupt_in = 0, expected 1
> > drivers/usb/serial/usb-serial.c: num_interrupt_out = 0, expected 0
> > drivers/usb/serial/usb-serial.c: num_bulk_in = 0, expected 1
> > drivers/usb/serial/usb-serial.c: num_bulk_out = 1, expected 1
> >
> > Okay, so
> > ---
> >
> > Changing num_interrupt_in and num_bulk_in from 1 to NUM_DONT_CARE makes
> > ti_usb_3410_5052 work again, but is it the right thing to do?
>
> It may or may not be the right thing to do, but it definitely isn't
> the correct way to solve your problem.
>
> The real question is why 2.6.24-rc1 doesn't like the second
> configuration descriptor. To answer it, you should see what shows up
> in the dmesg log when you first plug in the device on a kernel with
> CONFIG_USB_DEBUG enabled.
?!? As I wrote at the top of the message you quoted, I rebuilt with
CONFIG_USB_DEBUG enabled and loaded the modules with debug=1, thats how I was
able to see the 'wrong number of endpoints' message.
Given that the dongle works correctly with a stock 2.6.24-rc1 with commit
063a2da8f01806906f7d7b1a1424b9afddebc443 reversed, I'm reasonably confident
that with that commit in place, the usb core is working correctly (or atleast
as expected) in initially parsing the device descriptor, then usb-serial
attempts to match the interface descriptor on the first configuration, and
using the new more strict matching code, fails when the device reports for
the only interface on the first configuration it has only a single bulk_out
endpoint while the ti_usb_3410_5052 driver is expecting an interrupt_in and a
bulk_in. It never gets to the second configuration descriptor.
#2.6.23.1 lsusb -vvv:
Bus 007 Device 005: ID 0451:f430 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0xf430
bcdDevice 1.01
iManufacturer 1 Texas Instruments
iProduct 2 MSP-FET430UIF JTAG Tool
iSerial 3 TUSB341010398282E658FFD7
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 1
#2.6.24-rc1 lsusb -vvv
Bus 007 Device 004: ID 0451:f430 Texas Instruments, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0451 Texas Instruments, Inc.
idProduct 0xf430
bcdDevice 1.01
iManufacturer 1 Texas Instruments
iProduct 2 MSP-FET430UIF JTAG Tool
iSerial 3 TUSB341010398282E658FFD7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
for me the only question is whether ti_usb_3410_5052 should
have .num_interrupt_in and .num_bulk_in set to NUM_DONT_CARE or set to 0.
Are there versions of the dongle that have different device descriptors?
Before I bricked (sticked?) my TI eZ430-rf2500 dongle, it reported a
different idProduct even though as far as I can tell they are almost the
exact same hardware, so that shouldnt be a problem...
--
Steven King -- sfking at fdwdc dot com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
