Re: Multiple MSI messages support

[Jeff Garzik <jeff@garzik.org>]

Shawn Jin wrote:
> Hi,
>
> If this is really off-topic here, I apologize first. But I cannot
> think a better place to ask this particular question.
>
> I understand that the current PCI subsystem or linux kernel (x86)
> supports only one message when MSI is enabled even for devices having
> multiple MSI messages. But why? Is this a limitation solely due to the
> OS or due to the x86 APIC?
>
> I know the current linux kernel (2.6.23) changed MSI message data
> format a little bit to support other architectures. But some older
> version (e.g. 2.6.18) defined a specific format for the MSI msg data
> in a way that 8 bits contain the irq number and the other 8 bits have
> the interrupt attributes, which is x86 specific. Why does the msg data
> need to contain the irq number? Here is my hypothetic explanation. The
> device writes the MSI msg data to the specified MSI msg address. And
> APIC uses the irq number in the msg data to generate appropriate
> interrupt, which of course results in an appropriate ISR invoked. A
> device having multiple MSI messages typically appends some information
> of which MSI message to the msg data field. For example, if the system
> (or OS) configures the MSI msg data as 0x5000, a device having 4 MSI
> messages could write 0x5000, 0x5001, 0x5002, 0x5003 to differentiate
> the MSI messages. However this cannot work with the APIC due to the
> way how APIC asserts interrupts as I described above (if my
> understanding is correct).
>
> Hence my answer to the question is this is due to the x86 APIC. For
> other architectures such as powerpc this is probably not a problem
> since the interrupt controller is different. Am I correct?

IMO it's more like there has never been enough need for anybody to look 
into it, I bet...

The way drivers are written, you are typically must touch a few key 
hardware registers _anyway_, so the multiple messages in practice are 
not much more useful than the simple fact that your MSI irq handler 
function was called (with all that indicates and implies).

	Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/