[M68KNOMMU]: platform setup for 5272 ColdFire UARTs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch to platform style configuration for 5272 ColdFire UARTs.

Signed-off-by: Greg Ungerer <[email protected]>
---

diff -Naurp linux-2.6.23-rc1/arch/m68knommu/platform/5272/config.c linux-2.6.23-rc1.platform/arch/m68knommu/platform/5272/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5272/config.c	2007-10-25 10:48:36.000000000 +1000
+++ linux-2.6.23-rc1.platform/arch/m68knommu/platform/5272/config.c	2007-10-30 14:18:24.000000000 +1000
@@ -13,11 +13,12 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/dma.h>
 #include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/io.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
@@ -48,6 +49,60 @@ unsigned int dma_device_address[MAX_M68K
 
 /***************************************************************************/
 
+static struct mcf_platform_uart m5272_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= 73,
+	},
+	{
+		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= 74,
+	},
+	{ },
+};
+
+static struct platform_device m5272_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m5272_uart_platform,
+};
+
+static struct platform_device *m5272_devices[] __initdata = {
+	&m5272_uart,
+};
+
+/***************************************************************************/
+
+static void __init m5272_uart_init_line(int line, int irq)
+{
+	u32 v;
+
+	if ((line >= 0) && (line < 2)) {
+		v = (line) ? 0x0e000000 : 0xe0000000;
+		writel(v, MCF_MBAR + MCFSIM_ICR2);
+
+		/* Enable the output lines for the serial ports */
+		v = readl(MCF_MBAR + MCFSIM_PBCNT);
+		v = (v & ~0x000000ff) | 0x00000055;
+		writel(v, MCF_MBAR + MCFSIM_PBCNT);
+
+		v = readl(MCF_MBAR + MCFSIM_PDCNT);
+		v = (v & ~0x000003fc) | 0x000002a8;
+		writel(v, MCF_MBAR + MCFSIM_PDCNT);
+	}
+}
+
+static void __init m5272_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m5272_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m5272_uart_init_line(line, m5272_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	volatile unsigned long	*icrp;
@@ -93,7 +148,7 @@ int mcf_timerirqpending(int timer)
 
 /***************************************************************************/
 
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
 {
 #if defined (CONFIG_MOD5272)
 	volatile unsigned char	*pivrp;
@@ -109,10 +164,6 @@ void config_BSP(char *commandp, int size
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
 	commandp[size-1] = 0;
-#elif defined(CONFIG_MTD_KeyTechnology)
-	/* Copy command line from FLASH to local buffer... */
-	memcpy(commandp, (char *) 0xffe06000, size);
-	commandp[size-1] = 0;
 #elif defined(CONFIG_CANCam)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0010000, size);
@@ -125,3 +176,14 @@ void config_BSP(char *commandp, int size
 }
 
 /***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	m5272_uarts_init();
+	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux