Signed-off-by: Jeff Garzik <[email protected]>
---
drivers/isdn/hisax/Kconfig | 3 +-
drivers/isdn/hisax/Makefile | 2 +-
drivers/isdn/hisax/config.c | 26 +---
drivers/isdn/hisax/niccy.c | 460 ++++++++++++++++++++++++++++++------------
4 files changed, 333 insertions(+), 158 deletions(-)
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index ec6d9df..dbd7153 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -257,7 +257,8 @@ config HISAX_NETJET_U
settings.
config HISAX_NICCY
- bool "Niccy PnP/PCI card"
+ tristate "Niccy PnP/PCI card"
+ depends on (ISA || PCI)
help
This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
diff --git a/drivers/isdn/hisax/Makefile b/drivers/isdn/hisax/Makefile
index e67bf92..f840b23 100644
--- a/drivers/isdn/hisax/Makefile
+++ b/drivers/isdn/hisax/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_HISAX_NETJET_U) += netjet_u.o libhisax.o
obj-$(CONFIG_HISAX_TELESPCI) += telespci.o libhisax.o
obj-$(CONFIG_HISAX_FRITZPCI) += avm_pci.o libhisax.o
obj-$(CONFIG_HISAX_GAZEL) += gazel.o libhisax.o
+obj-$(CONFIG_HISAX_NICCY) += niccy.o libhisax.o
bkm_a4t_pci-objs := bkm_a4t.o jade.o
enternow-objs := enternow_pci.o amd7930_fn.o
@@ -61,7 +62,6 @@ hisax-$(CONFIG_HISAX_SPORTSTER) += sportster.o
hisax-$(CONFIG_HISAX_MIC) += mic.o
hisax-$(CONFIG_HISAX_HFCS) += hfcscard.o hfc_2bds0.o
hisax-$(CONFIG_HISAX_HFC_SX) += hfc_sx.o
-hisax-$(CONFIG_HISAX_NICCY) += niccy.o
hisax-$(CONFIG_HISAX_ISURF) += isurf.o isar.o
hisax-$(CONFIG_HISAX_HSTSAPHIR) += saphir.o
hisax-$(CONFIG_HISAX_SCT_QUADRO) += bkm_a8.o
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 79beff9..9ed7429 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -201,13 +201,6 @@ const char *CardType[] = {
#define DEFAULT_CFG {5,0x2E0,0,0}
#endif
-#ifdef CONFIG_HISAX_NICCY
-#undef DEFAULT_CARD
-#undef DEFAULT_CFG
-#define DEFAULT_CARD ISDN_CTYPE_NICCY
-#define DEFAULT_CFG {0,0x0,0,0}
-#endif
-
#ifdef CONFIG_HISAX_ISURF
#undef DEFAULT_CARD
#undef DEFAULT_CFG
@@ -258,10 +251,6 @@ static int io[HISAX_MAX_CARDS] = { 0, };
#ifdef CONFIG_HISAX_16_3
#define IO0_IO1
#endif
-#ifdef CONFIG_HISAX_NICCY
-#undef IO0_IO1
-#define IO0_IO1
-#endif
#ifdef IO0_IO1
static int io0[HISAX_MAX_CARDS] __devinitdata = { 0, };
static int io1[HISAX_MAX_CARDS] __devinitdata = { 0, };
@@ -447,10 +436,6 @@ extern int setup_hfcs(struct IsdnCard *card);
extern int setup_hfcsx(struct IsdnCard *card);
#endif
-#if CARD_NICCY
-extern int setup_niccy(struct IsdnCard *card);
-#endif
-
#if CARD_ISURF
extern int setup_isurf(struct IsdnCard *card);
#endif
@@ -827,11 +812,6 @@ static int hisax_cs_setup_card(struct IsdnCard *card)
ret = setup_hfcsx(card);
break;
#endif
-#if CARD_NICCY
- case ISDN_CTYPE_NICCY:
- ret = setup_niccy(card);
- break;
-#endif
#if CARD_ISURF
case ISDN_CTYPE_ISURF:
ret = setup_isurf(card);
@@ -860,6 +840,7 @@ static int hisax_cs_setup_card(struct IsdnCard *card)
case ISDN_CTYPE_TELESPCI:
case ISDN_CTYPE_FRITZPCI:
case ISDN_CTYPE_GAZEL:
+ case ISDN_CTYPE_NICCY:
printk(KERN_WARNING "HiSax: Support for %s Card has moved "
"to separate PCI driver module\n",
CardType[card->typ]);
@@ -1270,7 +1251,6 @@ static int __init HiSax_init(void)
#ifdef IO0_IO1
case ISDN_CTYPE_PNP:
- case ISDN_CTYPE_NICCY:
cards[j].para[0] = irq[i];
cards[j].para[1] = io0[i];
cards[j].para[2] = io1[i];
@@ -1327,6 +1307,7 @@ static int __init HiSax_init(void)
case ISDN_CTYPE_TELESPCI:
case ISDN_CTYPE_FRITZPCI:
case ISDN_CTYPE_GAZEL:
+ case ISDN_CTYPE_NICCY:
break;
case ISDN_CTYPE_SCT_QUADRO:
@@ -1815,9 +1796,6 @@ static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
#ifdef CONFIG_HISAX_SCT_QUADRO
{PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_ANY_ID, PCI_ANY_ID},
#endif
-#ifdef CONFIG_HISAX_NICCY
- {PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY, PCI_ANY_ID,PCI_ANY_ID},
-#endif
#ifdef CONFIG_HISAX_SEDLBAUER
{PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100, PCI_ANY_ID,PCI_ANY_ID},
#endif
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index e5918c6..20d4285 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -15,13 +15,22 @@
#include <linux/init.h>
#include "hisax.h"
+#include "hisax_proto.h"
#include "isac.h"
#include "hscx.h"
#include "isdnl1.h"
#include <linux/pci.h>
-#include <linux/isapnp.h>
+#include <linux/pnp.h>
+#include <linux/isa.h>
+
+static int niccy_protocol; /* 0 == use DEFAULT_PROTO */
+
+#ifdef CONFIG_ISA
+static int niccy_base0;
+static int niccy_base1;
+static int niccy_irq;
+#endif /* CONFIG_ISA */
-extern const char *CardType[];
static const char *niccy_revision = "$Revision: 1.21.2.4 $";
#define byteout(addr,val) outb(val,addr)
@@ -223,143 +232,18 @@ static int niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
return 0;
}
-static struct pci_dev *niccy_dev __devinitdata = NULL;
-#ifdef __ISAPNP__
-static struct pnp_card *pnp_c __devinitdata = NULL;
-#endif
-
-int __devinit setup_niccy(struct IsdnCard *card)
+static int __devinit setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
- if (cs->typ != ISDN_CTYPE_NICCY)
- return 0;
-#ifdef __ISAPNP__
- if (!card->para[1] && isapnp_present()) {
- struct pnp_dev *pnp_d = NULL;
- int err;
-
- pnp_c = pnp_find_card(ISAPNP_VENDOR('S', 'D', 'A'),
- ISAPNP_FUNCTION(0x0150), pnp_c);
- if (pnp_c) {
- pnp_d = pnp_find_dev(pnp_c,
- ISAPNP_VENDOR('S', 'D', 'A'),
- ISAPNP_FUNCTION(0x0150), pnp_d);
- if (!pnp_d) {
- printk(KERN_ERR "NiccyPnP: PnP error card "
- "found, no device\n");
- return 0;
- }
- pnp_disable_dev(pnp_d);
- err = pnp_activate_dev(pnp_d);
- if (err < 0) {
- printk(KERN_WARNING "%s: pnp_activate_dev "
- "ret(%d)\n", __FUNCTION__, err);
- return 0;
- }
- card->para[1] = pnp_port_start(pnp_d, 0);
- card->para[2] = pnp_port_start(pnp_d, 1);
- card->para[0] = pnp_irq(pnp_d, 0);
- if (!card->para[0] || !card->para[1] ||
- !card->para[2]) {
- printk(KERN_ERR "NiccyPnP:some resources are "
- "missing %ld/%lx/%lx\n",
- card->para[0], card->para[1],
- card->para[2]);
- pnp_disable_dev(pnp_d);
- return 0;
- }
- } else
- printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
- }
-#endif
- if (card->para[1]) {
- cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
- cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
- cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
- cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
- cs->hw.niccy.cfg_reg = 0;
- cs->subtyp = NICCY_PNP;
- cs->irq = card->para[0];
- if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
- printk(KERN_WARNING "HiSax: %s data port %x-%x "
- "already in use\n", CardType[card->typ],
- cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
- return 0;
- }
- if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
- printk(KERN_WARNING "HiSax: %s address port %x-%x "
- "already in use\n", CardType[card->typ],
- cs->hw.niccy.isac_ale,
- cs->hw.niccy.isac_ale + 1);
- release_region(cs->hw.niccy.isac, 2);
- return 0;
- }
- } else {
-#ifdef CONFIG_PCI
- u_int pci_ioaddr;
- cs->subtyp = 0;
- if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
- PCI_DEVICE_ID_SATSAGEM_NICCY,
- niccy_dev))) {
- if (pci_enable_device(niccy_dev))
- return 0;
- /* get IRQ */
- if (!niccy_dev->irq) {
- printk(KERN_WARNING
- "Niccy: No IRQ for PCI card found\n");
- return 0;
- }
- cs->irq = niccy_dev->irq;
- cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
- if (!cs->hw.niccy.cfg_reg) {
- printk(KERN_WARNING
- "Niccy: No IO-Adr for PCI cfg found\n");
- return 0;
- }
- pci_ioaddr = pci_resource_start(niccy_dev, 1);
- if (!pci_ioaddr) {
- printk(KERN_WARNING
- "Niccy: No IO-Adr for PCI card found\n");
- return 0;
- }
- cs->subtyp = NICCY_PCI;
- } else {
- printk(KERN_WARNING "Niccy: No PCI card found\n");
- return 0;
- }
- cs->irq_flags |= IRQF_SHARED;
- cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
- cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
- cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
- cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
- if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
- printk(KERN_WARNING
- "HiSax: %s data port %x-%x already in use\n",
- CardType[card->typ],
- cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
- return 0;
- }
- if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
- printk(KERN_WARNING
- "HiSax: %s pci port %x-%x already in use\n",
- CardType[card->typ],
- cs->hw.niccy.cfg_reg,
- cs->hw.niccy.cfg_reg + 0x40);
- release_region(cs->hw.niccy.isac, 4);
- return 0;
- }
-#else
- printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
- printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
- return 0;
-#endif /* CONFIG_PCI */
- }
+
+ WARN_ON(cs->typ != ISDN_CTYPE_NICCY);
+
printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
- CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
+ "niccy", (cs->subtyp == 1) ? "PnP" : "PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
setup_isac(cs);
cs->readisac = &ReadISAC;
@@ -380,3 +264,315 @@ int __devinit setup_niccy(struct IsdnCard *card)
}
return 1;
}
+
+#ifdef CONFIG_ISA
+
+static int __devinit niccy_isa_setup(struct IsdnCard *card)
+{
+ struct IsdnCardState *cs = card->cs;
+
+ cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
+ cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
+ cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
+ cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
+ cs->hw.niccy.cfg_reg = 0;
+ cs->subtyp = NICCY_PNP;
+ cs->irq = card->para[0];
+ if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
+ printk(KERN_WARNING "HiSax: %s data port %x-%x "
+ "already in use\n", "niccy",
+ cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
+ return 0;
+ }
+ if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
+ printk(KERN_WARNING "HiSax: %s address port %x-%x "
+ "already in use\n", "niccy",
+ cs->hw.niccy.isac_ale,
+ cs->hw.niccy.isac_ale + 1);
+ release_region(cs->hw.niccy.isac, 2);
+ return 0;
+ }
+
+ return setup_niccy(card);
+}
+
+static int __devinit niccy_isa_init_one(struct device *dev, unsigned int id)
+{
+ struct IsdnCard icard = { ISDN_CTYPE_NICCY, };
+ int cardnr;
+
+ icard.para[0] = niccy_irq;
+ icard.para[1] = niccy_base0;
+ icard.para[2] = niccy_base1;
+ if (!niccy_protocol)
+ icard.protocol = DEFAULT_PROTO;
+ else
+ icard.protocol = niccy_protocol;
+
+ cardnr = hisax_init_hotplug(&icard, niccy_isa_setup);
+ if (cardnr < 0)
+ return -ENODEV;
+
+ dev_set_drvdata(dev, (void *)(unsigned long) cardnr);
+ return 0;
+}
+
+static int __devexit niccy_isa_remove_one(struct device *dev, unsigned int id)
+{
+ int cardnr = (unsigned long) dev_get_drvdata(dev);
+
+ HiSax_closecard(cardnr);
+ return 0;
+}
+
+static struct isa_driver niccy_isa_driver = {
+ .probe = niccy_isa_init_one,
+ .remove = __devexit_p(niccy_isa_remove_one),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "niccy_pci",
+ },
+};
+
+#ifdef CONFIG_PNP
+
+static int __devinit niccy_pnp_setup(struct IsdnCard *card)
+{
+ struct pnp_dev *pnp_d = (void *) card->para[0];
+ int err;
+
+ pnp_disable_dev(pnp_d);
+ err = pnp_activate_dev(pnp_d);
+ if (err < 0) {
+ printk(KERN_WARNING "%s: pnp_activate_dev "
+ "ret(%d)\n", __FUNCTION__, err);
+ return 0;
+ }
+ card->para[1] = pnp_port_start(pnp_d, 0);
+ card->para[2] = pnp_port_start(pnp_d, 1);
+ card->para[0] = pnp_irq(pnp_d, 0);
+ if (!card->para[0] || !card->para[1] ||
+ !card->para[2]) {
+ printk(KERN_ERR "NiccyPnP:some resources are "
+ "missing %ld/%lx/%lx\n",
+ card->para[0], card->para[1],
+ card->para[2]);
+ pnp_disable_dev(pnp_d);
+ return 0;
+ }
+
+ return niccy_isa_setup(card);
+}
+
+static int __devinit niccy_pnp_init_one(struct pnp_dev *pdev,
+ const struct pnp_device_id *dev_id)
+{
+ struct IsdnCard icard = { ISDN_CTYPE_NICCY, };
+ int cardnr;
+
+ icard.para[0] = (unsigned long) pdev;
+ if (!niccy_protocol)
+ icard.protocol = DEFAULT_PROTO;
+ else
+ icard.protocol = niccy_protocol;
+
+ cardnr = hisax_init_hotplug(&icard, niccy_pnp_setup);
+ if (cardnr < 0)
+ return -ENODEV;
+
+ pnp_set_drvdata(pdev, (void *)(unsigned long) cardnr);
+ return 0;
+}
+
+static void __devexit niccy_pnp_remove_one(struct pnp_dev *pdev)
+{
+ int cardnr = (unsigned long) pnp_get_drvdata(pdev);
+
+ HiSax_closecard(cardnr);
+}
+
+static struct pnp_device_id niccy_pnp_table[] = {
+ { .id = "SDA0150", },
+
+ { .id = "" } /* terminate list */
+};
+
+static struct pnp_driver niccy_pnp_driver = {
+ .name = "niccy",
+ .id_table = niccy_pnp_table,
+ .probe = niccy_pnp_init_one,
+ .remove = __devexit_p(niccy_pnp_remove_one),
+};
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
+
+#ifdef CONFIG_PCI
+
+static int __devinit niccy_pci_setup(struct IsdnCard *card)
+{
+ u_int pci_ioaddr;
+ struct pci_dev *niccy_dev = (void *) card->para[0];
+ struct IsdnCardState *cs = card->cs;
+
+ cs->subtyp = 0;
+ if (pci_enable_device(niccy_dev))
+ return 0;
+ /* get IRQ */
+ if (!niccy_dev->irq) {
+ printk(KERN_WARNING
+ "Niccy: No IRQ for PCI card found\n");
+ return 0;
+ }
+ cs->irq = niccy_dev->irq;
+ cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
+ if (!cs->hw.niccy.cfg_reg) {
+ printk(KERN_WARNING
+ "Niccy: No IO-Adr for PCI cfg found\n");
+ return 0;
+ }
+ pci_ioaddr = pci_resource_start(niccy_dev, 1);
+ if (!pci_ioaddr) {
+ printk(KERN_WARNING
+ "Niccy: No IO-Adr for PCI card found\n");
+ return 0;
+ }
+ cs->subtyp = NICCY_PCI;
+ cs->irq_flags |= IRQF_SHARED;
+ cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
+ cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
+ cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
+ cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
+ if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
+ printk(KERN_WARNING
+ "HiSax: %s data port %x-%x already in use\n",
+ "niccy",
+ cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
+ return 0;
+ }
+ if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
+ printk(KERN_WARNING
+ "HiSax: %s pci port %x-%x already in use\n",
+ "niccy",
+ cs->hw.niccy.cfg_reg,
+ cs->hw.niccy.cfg_reg + 0x40);
+ release_region(cs->hw.niccy.isac, 4);
+ return 0;
+ }
+
+ return setup_niccy(card);
+}
+
+static int __devinit niccy_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct IsdnCard icard = { ISDN_CTYPE_NICCY, };
+ int cardnr;
+
+ icard.para[0] = (unsigned long) pdev;
+ if (!niccy_protocol)
+ icard.protocol = DEFAULT_PROTO;
+ else
+ icard.protocol = niccy_protocol;
+
+ cardnr = hisax_init_hotplug(&icard, niccy_pci_setup);
+ if (cardnr < 0)
+ return -ENODEV;
+
+ pci_set_drvdata(pdev, (void *)(unsigned long) cardnr);
+ return 0;
+}
+
+static struct pci_device_id niccy_pci_table[] = {
+ { PCI_VDEVICE(SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY) },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver niccy_pci_driver = {
+ .name = "niccy",
+ .id_table = niccy_pci_table,
+ .probe = niccy_pci_init_one,
+ .remove = hisax_pci_remove_one,
+};
+
+#endif /* CONFIG_PCI */
+
+static int __init niccy_mod_init(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_ISA
+ if (niccy_irq && niccy_base0 && niccy_base1) {
+ rc = isa_register_driver(&niccy_isa_driver, 1);
+ if (rc)
+ return rc;
+ }
+#ifdef CONFIG_PNP
+ else {
+ rc = pnp_register_driver(&niccy_pnp_driver);
+ if (rc)
+ return rc;
+ }
+#endif
+#endif /* CONFIG_ISA */
+
+#ifdef CONFIG_PCI
+ rc = pci_register_driver(&niccy_pci_driver);
+ if (rc)
+ goto err_out_isa;
+#endif /* CONFIG_PCI */
+
+ return 0;
+
+#ifdef CONFIG_PCI
+err_out_isa:
+
+#ifdef CONFIG_ISA
+ if (niccy_irq && niccy_base0 && niccy_base1)
+ isa_unregister_driver(&niccy_isa_driver);
+#ifdef CONFIG_PNP
+ else
+ pnp_unregister_driver(&niccy_pnp_driver);
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
+
+ return rc;
+#endif /* CONFIG_PCI */
+}
+
+static void __exit niccy_mod_exit(void)
+{
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&niccy_pci_driver);
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_ISA
+ if (niccy_irq && niccy_base0 && niccy_base1)
+ isa_unregister_driver(&niccy_isa_driver);
+#ifdef CONFIG_PNP
+ else
+ pnp_unregister_driver(&niccy_pnp_driver);
+#endif /* CONFIG_PNP */
+#endif /* CONFIG_ISA */
+}
+
+module_init(niccy_mod_init);
+module_exit(niccy_mod_exit);
+
+#ifdef CONFIG_ISA
+module_param_named(irq, niccy_irq, int, 0444);
+MODULE_PARM_DESC(irq, "ISA IRQ. Zero disables ISA support (default).");
+
+module_param_named(base0, niccy_base0, int, 0444);
+MODULE_PARM_DESC(base0, "ISA I/O base #0. Zero disables ISA support (default).");
+
+module_param_named(base1, niccy_base1, int, 0444);
+MODULE_PARM_DESC(base1, "ISA I/O base #1. Zero disables ISA support (default).");
+#endif /* CONFIG_ISA */
+
+module_param_named(protocol, niccy_protocol, int, 0444);
+MODULE_PARM_DESC(protocol, "Values 0 (default) through 4. See ISDN_PTYPE_xxx in linux/isdnif.h");
+
+MODULE_DEVICE_TABLE(pci, niccy_pci_table);
+MODULE_DESCRIPTION("ISDN HiSax Niccy PCI/PNP driver");
+MODULE_LICENSE("GPL");
--
1.5.2.4
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
