"real" fixes, and checkpatch fixes.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 17 ++---
drivers/ata/libata-core.c | 146 +++++++++++++++++++++++---------
drivers/ata/libata-eh.c | 25 +++++-
drivers/ata/libata-scsi.c | 23 -----
drivers/ata/pata_acpi.c | 4 +-
drivers/ata/pata_ns87415.c | 2 +
drivers/ata/pata_optidma.c | 2 +-
drivers/ata/pata_pcmcia.c | 12 ++--
drivers/ata/pata_pdc2027x.c | 2 +-
drivers/ata/pata_pdc202xx_old.c | 4 +-
drivers/ata/pata_scc.c | 13 +---
drivers/ata/pata_via.c | 2 +-
drivers/ata/pata_winbond.c | 2 +-
drivers/ata/pdc_adma.c | 12 ++--
drivers/ata/sata_inic162x.c | 4 +-
drivers/ata/sata_mv.c | 7 +-
drivers/ata/sata_nv.c | 120 ++++++++++++++------------
drivers/ata/sata_promise.c | 38 +++++----
drivers/ata/sata_qstor.c | 3 +-
drivers/ata/sata_sil.c | 11 ++-
drivers/ata/sata_sil24.c | 9 +-
drivers/ata/sata_sis.c | 64 ++++++++-------
drivers/ata/sata_svw.c | 10 +-
drivers/ata/sata_sx4.c | 177 ++++++++++++++++++++-------------------
drivers/ata/sata_uli.c | 18 ++--
drivers/ata/sata_via.c | 20 ++--
drivers/ata/sata_vsc.c | 15 ++--
include/linux/ata.h | 1 +
include/linux/libata.h | 9 ++
29 files changed, 432 insertions(+), 340 deletions(-)
Frank Lichtenheld (1):
pata_ns87415: define SUPERIO_IDE_MAX_RETRIES
Jeff Garzik (4):
[libata] fix 'if(' and similar areas that lack whitespace
[libata] Address some checkpatch-spotted issues
[libata] sata_nv: fix SWNCQ enabling
[libata] AHCI: fix newly introduced host-reset bug
Tejun Heo (6):
libata: relocate and fix post-command processing
libata: track SLEEP state and issue SRST to wake it up
libata: implement ata_wait_after_reset()
libata: relocate forcing PIO0 on reset
libata: no need to speed down if already at PIO0
libata: add MAXTOR 7V300F0/VA111900 to NCQ blacklist
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 49cf4cf..c8ab947 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -898,8 +898,10 @@ static int ahci_reset_controller(struct ata_host *host)
* AHCI-specific, such as HOST_RESET.
*/
tmp = readl(mmio + HOST_CTL);
- if (!(tmp & HOST_AHCI_EN))
- writel(tmp | HOST_AHCI_EN, mmio + HOST_CTL);
+ if (!(tmp & HOST_AHCI_EN)) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ }
/* global controller reset */
if ((tmp & HOST_RESET) == 0) {
@@ -1153,15 +1155,8 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 081e3df..3891cdc 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2219,6 +2219,25 @@ int ata_bus_probe(struct ata_port *ap)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
retry:
+ ata_link_for_each_dev(dev, &ap->link) {
+ /* If we issue an SRST then an ATA drive (not ATAPI)
+ * may change configuration and be in PIO0 timing. If
+ * we do a hard reset (or are coming from power on)
+ * this is true for ATA or ATAPI. Until we've set a
+ * suitable controller mode we should not touch the
+ * bus as we may be talking too fast.
+ */
+ dev->pio_mode = XFER_PIO_0;
+
+ /* If the controller has a pio mode setup function
+ * then use it to set the chipset to rights. Don't
+ * touch the DMA setup as that will be dealt with when
+ * configuring devices.
+ */
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+
/* reset and determine device classes */
ap->ops->phy_reset(ap);
@@ -2234,12 +2253,6 @@ int ata_bus_probe(struct ata_port *ap)
ata_port_probe(ap);
- /* after the reset the device state is PIO 0 and the controller
- state is undefined. Record the mode */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
@@ -3118,6 +3131,55 @@ int ata_busy_sleep(struct ata_port *ap,
}
/**
+ * ata_wait_after_reset - wait before checking status after reset
+ * @ap: port containing status register to be polled
+ * @deadline: deadline jiffies for the operation
+ *
+ * After reset, we need to pause a while before reading status.
+ * Also, certain combination of controller and device report 0xff
+ * for some duration (e.g. until SATA PHY is up and running)
+ * which is interpreted as empty port in ATA world. This
+ * function also waits for such devices to get out of 0xff
+ * status.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
+{
+ unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
+
+ if (time_before(until, deadline))
+ deadline = until;
+
+ /* Spec mandates ">= 2ms" before checking status. We wait
+ * 150ms, because that was the magic delay used for ATAPI
+ * devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready.
+ */
+ msleep(150);
+
+ /* Wait for 0xff to clear. Some SATA devices take a long time
+ * to clear 0xff after reset. For example, HHD424020F7SV00
+ * iVDR needs >= 800ms while. Quantum GoVault needs even more
+ * than that.
+ */
+ while (1) {
+ u8 status = ata_chk_status(ap);
+
+ if (status != 0xff || time_after(jiffies, deadline))
+ return;
+
+ msleep(50);
+ }
+}
+
+/**
* ata_wait_ready - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @deadline: deadline jiffies for the operation
@@ -3223,8 +3285,6 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- struct ata_device *dev;
- int i = 0;
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
@@ -3235,36 +3295,8 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
- /* If we issued an SRST then an ATA drive (not ATAPI)
- * may have changed configuration and be in PIO0 timing. If
- * we did a hard reset (or are coming from power on) this is
- * true for ATA or ATAPI. Until we've set a suitable controller
- * mode we should not touch the bus as we may be talking too fast.
- */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
- /* If the controller has a pio mode setup function then use
- it to set the chipset to rights. Don't touch the DMA setup
- as that will be dealt with when revalidating */
- if (ap->ops->set_piomode) {
- ata_link_for_each_dev(dev, &ap->link)
- if (devmask & (1 << i++))
- ap->ops->set_piomode(ap, dev);
- }
-
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
@@ -3691,8 +3723,8 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
return 0;
}
- /* wait a while before checking status, see SRST for more info */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* If PMP is supported, we have to do follow-up SRST. Note
* that some PMPs don't send D2H Reg FIS after hardreset at
@@ -3992,6 +4024,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, },
{ "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, },
{ "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
+ { "Maxtor 7V300F0", "VA111900", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
@@ -5594,6 +5627,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
* taken care of.
*/
if (ap->ops->error_handler) {
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
+
WARN_ON(ap->pflags & ATA_PFLAG_FROZEN);
if (unlikely(qc->err_mask))
@@ -5612,6 +5648,27 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
if (qc->flags & ATA_QCFLAG_RESULT_TF)
fill_result_tf(qc);
+ /* Some commands need post-processing after successful
+ * completion.
+ */
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if (qc->tf.feature != SETFEATURES_WC_ON &&
+ qc->tf.feature != SETFEATURES_WC_OFF)
+ break;
+ /* fall through */
+ case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
+ case ATA_CMD_SET_MULTI: /* multi_count changed */
+ /* revalidate device */
+ ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ break;
+
+ case ATA_CMD_SLEEP:
+ dev->flags |= ATA_DFLAG_SLEEPING;
+ break;
+ }
+
__ata_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
@@ -5749,6 +5806,14 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
qc->flags &= ~ATA_QCFLAG_DMAMAP;
}
+ /* if device is sleeping, schedule softreset and abort the link */
+ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
+ link->eh_info.action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
+ ata_link_abort(link);
+ return;
+ }
+
ap->ops->qc_prep(qc);
qc->err_mask |= ap->ops->qc_issue(qc);
@@ -7326,6 +7391,7 @@ EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(ata_wait_ready);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8cb35bb..ec55d63 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2083,6 +2083,25 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ata_link_for_each_dev(dev, link) {
+ /* If we issue an SRST then an ATA drive (not ATAPI)
+ * may change configuration and be in PIO0 timing. If
+ * we do a hard reset (or are coming from power on)
+ * this is true for ATA or ATAPI. Until we've set a
+ * suitable controller mode we should not touch the
+ * bus as we may be talking too fast.
+ */
+ dev->pio_mode = XFER_PIO_0;
+
+ /* If the controller has a pio mode setup function
+ * then use it to set the chipset to rights. Don't
+ * touch the DMA setup as that will be dealt with when
+ * configuring devices.
+ */
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
@@ -2208,9 +2227,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0
* and the controller state is undefined.
- * Record the mode.
+ * Reset also wakes up drives from sleeping
+ * mode.
*/
dev->pio_mode = XFER_PIO_0;
+ dev->flags &= ~ATA_DFLAG_SLEEPING;
if (ata_link_offline(link))
continue;
@@ -2416,7 +2437,7 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
/* give it just one more chance */
ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- if (ehc->tries[dev->devno] == 1) {
+ if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
/* This is the last chance, better to slow
* down than lose it.
*/
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f5d5420..f752edd 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1361,33 +1361,10 @@ nothing_to_do:
static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct ata_eh_info *ehi = &qc->dev->link->eh_info;
struct scsi_cmnd *cmd = qc->scsicmd;
u8 *cdb = cmd->cmnd;
int need_sense = (qc->err_mask != 0);
- /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and
- * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE
- * cache
- */
- if (ap->ops->error_handler && !need_sense) {
- switch (qc->tf.command) {
- case ATA_CMD_SET_FEATURES:
- if ((qc->tf.feature == SETFEATURES_WC_ON) ||
- (qc->tf.feature == SETFEATURES_WC_OFF)) {
- ehi->action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
- }
- break;
-
- case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
- case ATA_CMD_SET_MULTI: /* multi_count changed */
- ehi->action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
- break;
- }
- }
-
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
* generate because the user forced us to, a check condition
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 0f6f7bc..e4542ab 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
@@ -202,7 +202,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index b9a17eb..d0e2e50 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -215,6 +215,8 @@ static int ns87415_check_atapi_dma(struct ata_queued_cmd *qc)
#include <asm/superio.h>
+#define SUPERIO_IDE_MAX_RETRIES 25
+
/**
* ns87560_read_buggy - workaround buggy Super I/O chip
* @port: Port to read
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 6b07b5b..f9b485a 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -449,7 +449,7 @@ static int optiplus_with_udma(struct pci_dev *pdev)
/* Find function 1 */
dev1 = pci_get_device(0x1045, 0xC701, NULL);
- if(dev1 == NULL)
+ if (dev1 == NULL)
return 0;
/* Rev must be >= 0x10 */
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 5db2013..fd36099 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -74,8 +74,7 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d
return ata_do_set_mode(link, r_failed_dev);
if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
- ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
- {
+ ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
/* Suspicious match, but could be two cards from
the same vendor - check serial */
if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
@@ -248,7 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
goto next_entry;
io_base = pdev->io.BasePort1;
ctl_base = pdev->io.BasePort1 + 0x0e;
- } else goto next_entry;
+ } else
+ goto next_entry;
/* If we've got this far, we're done */
break;
}
@@ -285,8 +285,8 @@ next_entry:
printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
/*
- * Having done the PCMCIA plumbing the ATA side is relatively
- * sane.
+ * Having done the PCMCIA plumbing the ATA side is relatively
+ * sane.
*/
ret = -ENOMEM;
host = ata_host_alloc(&pdev->dev, 1);
@@ -363,7 +363,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
- PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 3d3f155..2622577 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
- if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
return ata_pci_default_filter(adev, mask);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 65d9516..bc7c2d5 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -351,9 +351,9 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
struct pci_dev *bridge = dev->bus->self;
/* Don't grab anything behind a Promise I2O RAID */
if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
return -ENODEV;
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
return -ENODEV;
}
}
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 5557613..ea2ef9f 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -570,17 +570,8 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ea7a9a6..a4175fb 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -176,7 +176,7 @@ static int via_cable_detect(struct ata_port *ap) {
if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
return ATA_CBL_PATA40;
/* UDMA 66 chips have only drive side logic */
- else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+ else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
return ATA_CBL_PATA_UNK;
/* UDMA 100 or later */
pci_read_config_dword(pdev, 0x50, &ata66);
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 549cbbe..311cdb3 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -279,7 +279,7 @@ static __init int winbond_init(void)
if (request_region(port, 2, "pata_winbond")) {
ret = winbond_init_one(port);
- if(ret <= 0)
+ if (ret <= 0)
release_region(port, 2);
else ct+= ret;
}
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 199f7e1..bd4c2a3 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -47,10 +47,10 @@
#define DRV_VERSION "1.0"
/* macro to calculate base address for ATA regs */
-#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
+#define ADMA_ATA_REGS(base, port_no) ((base) + ((port_no) * 0x40))
/* macro to calculate base address for ADMA regs */
-#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
+#define ADMA_REGS(base, port_no) ((base) + 0x80 + ((port_no) * 0x20))
/* macro to obtain addresses from ata_port */
#define ADMA_PORT_REGS(ap) \
@@ -128,7 +128,7 @@ struct adma_port_priv {
adma_state_t state;
};
-static int adma_ata_init_one (struct pci_dev *pdev,
+static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static int adma_port_start(struct ata_port *ap);
static void adma_host_stop(struct ata_host *host);
@@ -340,8 +340,8 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
buf[i++] = 0; /* pPKLW */
buf[i++] = 0; /* reserved */
- *(__le32 *)(buf + i)
- = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
+ *(__le32 *)(buf + i) =
+ (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
i += 4;
VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
@@ -617,7 +617,7 @@ static int adma_port_start(struct ata_port *ap)
return -ENOMEM;
/* paranoia? */
if ((pp->pkt_dma & 7) != 0) {
- printk("bad alignment for pp->pkt_dma: %08x\n",
+ printk(KERN_ERR "bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
return -ENOMEM;
}
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 08595f3..323c087 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -143,7 +143,7 @@ static const int scr_map[] = {
[SCR_CONTROL] = 2,
};
-static void __iomem * inic_port_base(struct ata_port *ap)
+static void __iomem *inic_port_base(struct ata_port *ap)
{
return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
}
@@ -448,7 +448,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
struct ata_taskfile tf;
/* wait a while before checking status */
- msleep(150);
+ ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b39648f..a43f64d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1156,7 +1156,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
}
-static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
+static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
{
u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
(last ? CRQB_CMD_LAST : 0);
@@ -2429,7 +2429,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
struct mv_host_priv *hpriv = host->private_data;
u32 hp_flags = hpriv->hp_flags;
- switch(board_idx) {
+ switch (board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
@@ -2510,7 +2510,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
break;
default:
- printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BUG: invalid board index %u\n", board_idx);
return 1;
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f1b422f..35b2df2 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -291,7 +291,7 @@ struct nv_swncq_port_priv {
};
-#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & (1 << (19 + (12 * (PORT)))))
static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
@@ -884,8 +884,9 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
/* Notifier bits set without a command may indicate the drive
is misbehaving. Raise host state machine violation on this
condition. */
- ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
- cpb_num);
+ ata_port_printk(ap, KERN_ERR,
+ "notifier for tag %d with no cmd?\n",
+ cpb_num);
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
@@ -1012,7 +1013,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
u32 check_commands;
int pos, error = 0;
- if(ata_tag_valid(ap->link.active_tag))
+ if (ata_tag_valid(ap->link.active_tag))
check_commands = 1 << ap->link.active_tag;
else
check_commands = ap->link.sactive;
@@ -1021,14 +1022,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
while ((pos = ffs(check_commands)) && !error) {
pos--;
error = nv_adma_check_cpb(ap, pos,
- notifier_error & (1 << pos) );
- check_commands &= ~(1 << pos );
+ notifier_error & (1 << pos));
+ check_commands &= ~(1 << pos);
}
}
}
}
- if(notifier_clears[0] || notifier_clears[1]) {
+ if (notifier_clears[0] || notifier_clears[1]) {
/* Note: Both notifier clear registers must be written
if either is set, even if one is zero, according to NVIDIA. */
struct nv_adma_port_priv *pp = host->ports[0]->private_data;
@@ -1061,7 +1062,7 @@ static void nv_adma_freeze(struct ata_port *ap)
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_thaw(struct ata_port *ap)
@@ -1079,7 +1080,7 @@ static void nv_adma_thaw(struct ata_port *ap)
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_irq_clear(struct ata_port *ap)
@@ -1119,7 +1120,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
- if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
ata_bmdma_post_internal_cmd(qc);
}
@@ -1165,7 +1166,7 @@ static int nv_adma_port_start(struct ata_port *ap)
pp->cpb_dma = mem_dma;
writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((mem_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
@@ -1189,15 +1190,15 @@ static int nv_adma_port_start(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
@@ -1237,7 +1238,7 @@ static int nv_adma_port_resume(struct ata_port *ap)
/* set CPB block location */
writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((pp->cpb_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((pp->cpb_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
/* clear any outstanding interrupt conditions */
writew(0xffff, mmio + NV_ADMA_STAT);
@@ -1250,15 +1251,15 @@ static int nv_adma_port_resume(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
@@ -1342,7 +1343,8 @@ static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
idx = 0;
ata_for_each_sg(sg, qc) {
- aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+ aprd = (idx < 5) ? &cpb->aprd[idx] :
+ &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
nv_adma_fill_aprd(qc, sg, idx, aprd);
idx++;
}
@@ -1359,12 +1361,12 @@ static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
/* ADMA engine can only be used for non-ATAPI DMA commands,
or interrupt-driven no-data commands, where a result taskfile
is not required. */
- if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
+ if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
(qc->tf.flags & ATA_TFLAG_POLLING) ||
(qc->flags & ATA_QCFLAG_RESULT_TF))
return 1;
- if((qc->flags & ATA_QCFLAG_DMAMAP) ||
+ if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
(qc->tf.protocol == ATA_PROT_NODATA))
return 0;
@@ -1401,14 +1403,14 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
- if(qc->flags & ATA_QCFLAG_DMAMAP) {
+ if (qc->flags & ATA_QCFLAG_DMAMAP) {
nv_adma_fill_sg(qc, cpb);
ctl_flags |= NV_CPB_CTL_APRD_VALID;
} else
memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5);
- /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
- finished filling in all of the contents */
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID
+ until we are finished filling in all of the contents */
wmb();
cpb->ctl_flags = ctl_flags;
wmb();
@@ -1435,16 +1437,16 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
and (number of cpbs to append -1) in top 8 bits */
wmb();
- if(curr_ncq != pp->last_issue_ncq) {
- /* Seems to need some delay before switching between NCQ and non-NCQ
- commands, else we get command timeouts and such. */
+ if (curr_ncq != pp->last_issue_ncq) {
+ /* Seems to need some delay before switching between NCQ and
+ non-NCQ commands, else we get command timeouts and such. */
udelay(20);
pp->last_issue_ncq = curr_ncq;
}
writew(qc->tag, mmio + NV_ADMA_APPEND);
- DPRINTK("Issued tag %u\n",qc->tag);
+ DPRINTK("Issued tag %u\n", qc->tag);
return 0;
}
@@ -1641,12 +1643,12 @@ static void nv_error_handler(struct ata_port *ap)
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
void __iomem *mmio = pp->ctl_block;
int i;
u16 tmp;
- if(ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
+ if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
@@ -1654,16 +1656,17 @@ static void nv_adma_error_handler(struct ata_port *ap)
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
- ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ ata_port_printk(ap, KERN_ERR,
+ "EH in ADMA mode, notifier 0x%X "
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
"next cpb count 0x%X next cpb idx 0x%x\n",
notifier, notifier_error, gen_ctl, status,
cpb_count, next_cpb_idx);
- for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
struct nv_adma_cpb *cpb = &pp->cpb[i];
- if( (ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
- ap->link.sactive & (1 << i) )
+ if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
+ ap->link.sactive & (1 << i))
ata_port_printk(ap, KERN_ERR,
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
i, cpb->ctl_flags, cpb->resp_flags);
@@ -1673,8 +1676,9 @@ static void nv_adma_error_handler(struct ata_port *ap)
/* Push us back into port register mode for error handling. */
nv_adma_register_mode(ap);
- /* Mark all of the CPBs as invalid to prevent them from being executed */
- for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ /* Mark all of the CPBs as invalid to prevent them from
+ being executed */
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
/* clear CPB fetch count */
@@ -1683,10 +1687,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
/* Reset channel */
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
@@ -2350,9 +2354,9 @@ static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
-static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
const struct ata_port_info *ppi[] = { NULL, NULL };
struct ata_host *host;
struct nv_host_priv *hpriv;
@@ -2364,7 +2368,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
// it's an IDE controller and we ignore it.
- for (bar=0; bar<6; bar++)
+ for (bar = 0; bar < 6; bar++)
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
@@ -2381,6 +2385,14 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
type = ADMA;
}
+ if (type == SWNCQ) {
+ if (swncq_enabled)
+ dev_printk(KERN_NOTICE, &pdev->dev,
+ "Using SWNCQ mode\n");
+ else
+ type = GENERIC;
+ }
+
ppi[0] = &nv_port_info[type];
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
@@ -2422,10 +2434,8 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
rc = nv_adma_host_init(host);
if (rc)
return rc;
- } else if (type == SWNCQ && swncq_enabled) {
- dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ } else if (type == SWNCQ)
nv_swncq_host_init(host);
- }
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
@@ -2440,37 +2450,37 @@ static int nv_pci_device_resume(struct pci_dev *pdev)
int rc;
rc = ata_pci_device_do_resume(pdev);
- if(rc)
+ if (rc)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- if(hpriv->type >= CK804) {
+ if (hpriv->type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
- if(hpriv->type == ADMA) {
+ if (hpriv->type == ADMA) {
u32 tmp32;
struct nv_adma_port_priv *pp;
/* enable/disable ADMA on the ports appropriately */
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
pp = host->ports[0]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
pp = host->ports[1]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
}
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 9032131..deb26f0 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -83,10 +83,12 @@ enum {
PDC_PCI_SYS_ERR = (1 << 22), /* PCI system error */
PDC1_PCI_PARITY_ERR = (1 << 23), /* PCI parity error (from SATA150 driver) */
PDC1_ERR_MASK = PDC1_PCI_PARITY_ERR,
- PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR,
- PDC_ERR_MASK = (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC_OVERRUN_ERR
- | PDC_UNDERRUN_ERR | PDC_DRIVE_ERR | PDC_PCI_SYS_ERR
- | PDC1_ERR_MASK | PDC2_ERR_MASK),
+ PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR |
+ PDC2_ATA_DMA_CNT_ERR,
+ PDC_ERR_MASK = PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR |
+ PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR |
+ PDC_DRIVE_ERR | PDC_PCI_SYS_ERR |
+ PDC1_ERR_MASK | PDC2_ERR_MASK,
board_2037x = 0, /* FastTrak S150 TX2plus */
board_2037x_pata = 1, /* FastTrak S150 TX2plus PATA port */
@@ -695,19 +697,20 @@ static void pdc_irq_clear(struct ata_port *ap)
readl(mmio + PDC_INT_SEQMASK);
}
-static inline int pdc_is_sataii_tx4(unsigned long flags)
+static int pdc_is_sataii_tx4(unsigned long flags)
{
const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
return (flags & mask) == mask;
}
-static inline unsigned int pdc_port_no_to_ata_no(unsigned int port_no, int is_sataii_tx4)
+static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
+ int is_sataii_tx4)
{
static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
}
-static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
+static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ata_port *ap;
@@ -839,15 +842,16 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_ATAPI_DMA);
ata_tf_load(ap, tf);
}
-static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap,
+ const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_ATAPI_DMA);
ata_exec_command(ap, tf);
}
@@ -870,8 +874,11 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
}
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
if (scsicmd[0] == WRITE_10) {
- unsigned int lba;
- lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5];
+ unsigned int lba =
+ (scsicmd[2] << 24) |
+ (scsicmd[3] << 16) |
+ (scsicmd[4] << 8) |
+ scsicmd[5];
if (lba >= 0xFFFF4FA2)
pio = 1;
}
@@ -956,7 +963,8 @@ static void pdc_host_init(struct ata_host *host)
writel(tmp, mmio + PDC_SLEW_CTL);
}
-static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pdc_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index c4c4cd2..6d43ba7 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -113,7 +113,7 @@ struct qs_port_priv {
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int qs_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int qs_port_start(struct ata_port *ap);
static void qs_host_stop(struct ata_host *host);
static void qs_phy_reset(struct ata_port *ap);
@@ -135,7 +135,6 @@ static struct scsi_host_template qs_ata_sht = {
.sg_tablesize = QS_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
- //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = QS_DMA_BOUNDARY,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ea3a0ab..4e6e381 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -111,7 +111,7 @@ enum {
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
@@ -138,7 +138,7 @@ static const struct pci_device_id sil_pci_tbl[] = {
/* TODO firmware versions should be added - eric */
static const struct sil_drivelist {
- const char * product;
+ const char *product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST320012AS", SIL_QUIRK_MOD15WRITE },
@@ -279,7 +279,7 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int slow_down = 0;
+static int slow_down;
module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
@@ -332,7 +332,8 @@ static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
return 0;
}
-static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+static inline void __iomem *sil_scr_addr(struct ata_port *ap,
+ unsigned int sc_reg)
{
void __iomem *offset = ap->ioaddr.scr_addr;
@@ -643,7 +644,7 @@ static void sil_init_controller(struct ata_host *host)
}
}
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 26ebffc..3c481e0 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -674,7 +674,7 @@ static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
/* put the port into known state */
if (sil24_init_port(ap)) {
- reason ="port not ready";
+ reason = "port not ready";
goto err;
}
@@ -756,7 +756,8 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class,
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
- PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
+ PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
+ tout_msec);
/* SStatus oscillates between zero and valid status after
* DEV_RST, debounce it.
@@ -1270,7 +1271,7 @@ static void sil24_init_controller(struct ata_host *host)
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, host->dev,
- "failed to clear port RST\n");
+ "failed to clear port RST\n");
}
/* configure port */
@@ -1283,7 +1284,7 @@ static void sil24_init_controller(struct ata_host *host)
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
struct ata_port_info pi = sil24_port_info[ent->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
void __iomem * const *iomap;
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f147dc7..a01260a 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -63,17 +63,17 @@ enum {
GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */
};
-static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int sis_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sis_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int sis_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id sis_pci_tbl[] = {
- { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
- { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
- { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
- { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
+ { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
+ { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
{ } /* terminate list */
};
@@ -149,24 +149,24 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
if (ap->port_no) {
switch (pdev->device) {
- case 0x0180:
- case 0x0181:
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
- if ((pmr & SIS_PMR_COMBINED) == 0)
- addr += SIS180_SATA1_OFS;
- break;
-
- case 0x0182:
- case 0x0183:
- case 0x1182:
- addr += SIS182_SATA1_OFS;
- break;
+ case 0x0180:
+ case 0x0181:
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+ if ((pmr & SIS_PMR_COMBINED) == 0)
+ addr += SIS180_SATA1_OFS;
+ break;
+
+ case 0x0182:
+ case 0x0183:
+ case 0x1182:
+ addr += SIS182_SATA1_OFS;
+ break;
}
}
return addr;
}
-static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static u32 sis_scr_cfg_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -190,7 +190,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
return 0;
}
-static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static void sis_scr_cfg_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -253,7 +253,7 @@ static int sis_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
return 0;
}
-static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_port_info pi = sis_port_info;
@@ -309,29 +309,33 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
} else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
- port2_start=0;
+ port2_start = 0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
break;
case 0x0182:
case 0x0183:
- pci_read_config_dword ( pdev, 0x6C, &val);
+ pci_read_config_dword(pdev, 0x6C, &val);
if (val & (1L << 31)) {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
} else {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 182/965L chipset\n");
}
break;
case 0x1182:
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 1182/966/680 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
break;
case 0x1183:
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
ppi[0] = &sis_info133_for_sata;
ppi[1] = &sis_info133_for_sata;
break;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 12d613c..69f651e 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -182,7 +182,7 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
- }
+ }
}
/**
@@ -193,7 +193,7 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
* spin_lock_irqsave(host lock)
*/
-static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
@@ -224,7 +224,7 @@ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
* spin_lock_irqsave(host lock)
*/
-static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
+static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -255,7 +255,7 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
static u8 k2_stat_check_status(struct ata_port *ap)
{
- return readl(ap->ioaddr.status_addr);
+ return readl(ap->ioaddr.status_addr);
}
#ifdef CONFIG_PPC_OF
@@ -395,7 +395,7 @@ static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
}
-static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] =
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index b6026bc..4d85718 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -212,9 +212,9 @@ struct pdc_host_priv {
};
-static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset (struct ata_port *ap);
+static void pdc_20621_phy_reset(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -320,16 +320,16 @@ static int pdc_port_start(struct ata_port *ap)
return 0;
}
-static void pdc_20621_phy_reset (struct ata_port *ap)
+static void pdc_20621_phy_reset(struct ata_port *ap)
{
VPRINTK("ENTER\n");
- ap->cbl = ATA_CBL_SATA;
- ata_port_probe(ap);
- ata_bus_reset(ap);
+ ap->cbl = ATA_CBL_SATA;
+ ata_port_probe(ap);
+ ata_bus_reset(ap);
}
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
- unsigned int portno,
+ unsigned int portno,
unsigned int total_len)
{
u32 addr;
@@ -351,7 +351,7 @@ static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
}
static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf,
- unsigned int portno,
+ unsigned int portno,
unsigned int total_len)
{
u32 addr;
@@ -711,8 +711,8 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
return ata_qc_issue_prot(qc);
}
-static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
- struct ata_queued_cmd *qc,
+static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc,
unsigned int doing_hdma,
void __iomem *mmio)
{
@@ -803,7 +803,7 @@ static void pdc20621_irq_clear(struct ata_port *ap)
readl(mmio + PDC_20621_SEQMASK);
}
-static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance)
+static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ata_port *ap;
@@ -836,9 +836,9 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance)
return IRQ_NONE;
}
- spin_lock(&host->lock);
+ spin_lock(&host->lock);
- for (i = 1; i < 9; i++) {
+ for (i = 1; i < 9; i++) {
port_no = i - 1;
if (port_no > 3)
port_no -= 4;
@@ -859,7 +859,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance)
}
}
- spin_unlock(&host->lock);
+ spin_unlock(&host->lock);
VPRINTK("mask == 0x%x\n", mask);
@@ -906,16 +906,16 @@ static void pdc_eng_timeout(struct ata_port *ap)
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_exec_command(ap, tf);
}
@@ -953,7 +953,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
mmio += PDC_CHIP0_OFS;
page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
idx = (u16) (offset / window_size);
writel(0x01, mmio + PDC_GENERAL_CTLR);
@@ -979,7 +979,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
window_size / 4);
psource += window_size;
size -= window_size;
- idx ++;
+ idx++;
}
if (size) {
@@ -1008,7 +1008,7 @@ static void pdc20621_put_to_dimm(struct ata_host *host, void *psource,
mmio += PDC_CHIP0_OFS;
page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
idx = (u16) (offset / window_size);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
@@ -1031,7 +1031,7 @@ static void pdc20621_put_to_dimm(struct ata_host *host, void *psource,
readl(mmio + PDC_GENERAL_CTLR);
psource += window_size;
size -= window_size;
- idx ++;
+ idx++;
}
if (size) {
@@ -1050,7 +1050,7 @@ static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
u32 i2creg = 0;
u32 status;
- u32 count =0;
+ u32 count = 0;
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -1082,21 +1082,21 @@ static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
static int pdc20621_detect_dimm(struct ata_host *host)
{
- u32 data=0 ;
+ u32 data = 0;
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
- if (data == 100)
+ if (data == 100)
return 100;
- } else
+ } else
return 0;
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
- if(data <= 0x75)
+ if (data <= 0x75)
return 133;
- } else
+ } else
return 0;
- return 0;
+ return 0;
}
@@ -1104,8 +1104,8 @@ static int pdc20621_prog_dimm0(struct ata_host *host)
{
u32 spd0[50];
u32 data = 0;
- int size, i;
- u8 bdimmsize;
+ int size, i;
+ u8 bdimmsize;
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
static const struct {
unsigned int reg;
@@ -1128,40 +1128,40 @@ static int pdc20621_prog_dimm0(struct ata_host *host)
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
+ for (i = 0; i < ARRAY_SIZE(pdc_i2c_read_data); i++)
pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
pdc_i2c_read_data[i].reg,
&spd0[pdc_i2c_read_data[i].ofs]);
- data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
- data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
+ data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
+ data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
((((spd0[27] + 9) / 10) - 1) << 8) ;
- data |= (((((spd0[29] > spd0[28])
+ data |= (((((spd0[29] > spd0[28])
? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
- data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
+ data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
- if (spd0[18] & 0x08)
+ if (spd0[18] & 0x08)
data |= ((0x03) << 14);
- else if (spd0[18] & 0x04)
+ else if (spd0[18] & 0x04)
data |= ((0x02) << 14);
- else if (spd0[18] & 0x01)
+ else if (spd0[18] & 0x01)
data |= ((0x01) << 14);
- else
+ else
data |= (0 << 14);
- /*
+ /*
Calculate the size of bDIMMSize (power of 2) and
merge the DIMM size by program start/end address.
*/
- bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
- size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
- data |= (((size / 16) - 1) << 16);
- data |= (0 << 23);
+ bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
+ size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
+ data |= (((size / 16) - 1) << 16);
+ data |= (0 << 23);
data |= 8;
- writel(data, mmio + PDC_DIMM0_CONTROL);
+ writel(data, mmio + PDC_DIMM0_CONTROL);
readl(mmio + PDC_DIMM0_CONTROL);
- return size;
+ return size;
}
@@ -1172,9 +1172,9 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
/* hard-code chip #0 */
- mmio += PDC_CHIP0_OFS;
+ mmio += PDC_CHIP0_OFS;
- /*
+ /*
Set To Default : DIMM Module Global Control Register (0x022259F1)
DIMM Arbitration Disable (bit 20)
DIMM Data/Control Output Driving Selection (bit12 - bit15)
@@ -1193,40 +1193,40 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
writel(data, mmio + PDC_SDRAM_CONTROL);
readl(mmio + PDC_SDRAM_CONTROL);
printk(KERN_ERR "Local DIMM ECC Enabled\n");
- }
+ }
- /* DIMM Initialization Select/Enable (bit 18/19) */
- data &= (~(1<<18));
- data |= (1<<19);
- writel(data, mmio + PDC_SDRAM_CONTROL);
+ /* DIMM Initialization Select/Enable (bit 18/19) */
+ data &= (~(1<<18));
+ data |= (1<<19);
+ writel(data, mmio + PDC_SDRAM_CONTROL);
- error = 1;
- for (i = 1; i <= 10; i++) { /* polling ~5 secs */
+ error = 1;
+ for (i = 1; i <= 10; i++) { /* polling ~5 secs */
data = readl(mmio + PDC_SDRAM_CONTROL);
if (!(data & (1<<19))) {
- error = 0;
- break;
+ error = 0;
+ break;
}
msleep(i*100);
- }
- return error;
+ }
+ return error;
}
static unsigned int pdc20621_dimm_init(struct ata_host *host)
{
int speed, size, length;
- u32 addr,spd0,pci_status;
- u32 tmp=0;
- u32 time_period=0;
- u32 tcount=0;
- u32 ticks=0;
- u32 clock=0;
- u32 fparam=0;
+ u32 addr, spd0, pci_status;
+ u32 tmp = 0;
+ u32 time_period = 0;
+ u32 tcount = 0;
+ u32 ticks = 0;
+ u32 clock = 0;
+ u32 fparam = 0;
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
/* hard-code chip #0 */
- mmio += PDC_CHIP0_OFS;
+ mmio += PDC_CHIP0_OFS;
/* Initialize PLL based upon PCI Bus Frequency */
@@ -1254,7 +1254,7 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
register should be >= (0xffffffff - 3x10^8).
*/
- if(tcount >= PCI_X_TCOUNT) {
+ if (tcount >= PCI_X_TCOUNT) {
ticks = (time_period - tcount);
VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);
@@ -1285,41 +1285,43 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
if (!(speed = pdc20621_detect_dimm(host))) {
printk(KERN_ERR "Detect Local DIMM Fail\n");
return 1; /* DIMM error */
- }
- VPRINTK("Local DIMM Speed = %d\n", speed);
+ }
+ VPRINTK("Local DIMM Speed = %d\n", speed);
- /* Programming DIMM0 Module Control Register (index_CID0:80h) */
+ /* Programming DIMM0 Module Control Register (index_CID0:80h) */
size = pdc20621_prog_dimm0(host);
- VPRINTK("Local DIMM Size = %dMB\n",size);
+ VPRINTK("Local DIMM Size = %dMB\n", size);
- /* Programming DIMM Module Global Control Register (index_CID0:88h) */
+ /* Programming DIMM Module Global Control Register (index_CID0:88h) */
if (pdc20621_prog_dimm_global(host)) {
printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n");
return 1;
- }
+ }
#ifdef ATA_VERBOSE_DEBUG
{
- u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ',
- 'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ',
- '1','.','1','0',
- '9','8','0','3','1','6','1','2',0,0};
+ u8 test_parttern1[40] =
+ {0x55,0xAA,'P','r','o','m','i','s','e',' ',
+ 'N','o','t',' ','Y','e','t',' ',
+ 'D','e','f','i','n','e','d',' ',
+ '1','.','1','0',
+ '9','8','0','3','1','6','1','2',0,0};
u8 test_parttern2[40] = {0};
- pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x10040, 40);
- pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern2, 0x10040, 40);
+ pdc20621_put_to_dimm(host, test_parttern2, 0x40, 40);
- pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x10040, 40);
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern1, 0x10040, 40);
+ pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x10040,
+ pdc20621_get_from_dimm(host, test_parttern2, 0x10040,
40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
- pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x40, 40);
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern1, 0x40, 40);
+ pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
}
@@ -1375,7 +1377,8 @@ static void pdc_20621_init(struct ata_host *host)
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
}
-static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pdc_sata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] =
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d394da0..e710e71 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -56,9 +56,9 @@ struct uli_priv {
unsigned int scr_cfg_addr[uli_max_ports];
};
-static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int uli_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id uli_pci_tbl[] = {
{ PCI_VDEVICE(AL, 0x5289), uli_5289 },
@@ -143,7 +143,7 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
}
-static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
+static u32 uli_scr_cfg_read(struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -153,7 +153,7 @@ static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
return val;
}
-static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
+static void uli_scr_cfg_write(struct ata_port *ap, unsigned int scr, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, scr);
@@ -161,7 +161,7 @@ static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
pci_write_config_dword(pdev, cfg_addr, val);
}
-static int uli_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
if (sc_reg > SCR_CONTROL)
return -EINVAL;
@@ -170,16 +170,16 @@ static int uli_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
return 0;
}
-static int uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
+ if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
return -EINVAL;
uli_scr_cfg_write(ap, sc_reg, val);
return 0;
}
-static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index cc6ee08..3ef072f 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -3,7 +3,7 @@
*
* Maintained by: Jeff Garzik <[email protected]>
* Please ALWAYS copy [email protected]
- on emails.
+ * on emails.
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
@@ -69,7 +69,7 @@ enum {
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
};
-static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static void svia_noop_freeze(struct ata_port *ap);
@@ -372,12 +372,12 @@ static const unsigned int vt6421_bar_sizes[] = {
16, 16, 16, 16, 32, 128
};
-static void __iomem * svia_scr_addr(void __iomem *addr, unsigned int port)
+static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port)
{
return addr + (port * 128);
}
-static void __iomem * vt6421_scr_addr(void __iomem *addr, unsigned int port)
+static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port)
{
return addr + (port * 64);
}
@@ -472,7 +472,7 @@ static void svia_configure(struct pci_dev *pdev)
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channels (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
@@ -482,7 +482,7 @@ static void svia_configure(struct pci_dev *pdev)
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channel interrupts (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
@@ -492,13 +492,13 @@ static void svia_configure(struct pci_dev *pdev)
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channel native mode (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
}
-static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int i;
@@ -525,8 +525,8 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_ERR, &pdev->dev,
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
i,
- (unsigned long long)pci_resource_start(pdev, i),
- (unsigned long long)pci_resource_len(pdev, i));
+ (unsigned long long)pci_resource_start(pdev, i),
+ (unsigned long long)pci_resource_len(pdev, i));
return -ENODEV;
}
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 0d9be16..95ae3ed 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -162,7 +162,8 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
/*
* The only thing the ctl register is used for is SRST.
* That is not enabled or disabled via tf_load.
- * However, if ATA_NIEN is changed, then we need to change the interrupt register.
+ * However, if ATA_NIEN is changed, then we need to change
+ * the interrupt register.
*/
if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
ap->last_ctl = tf->ctl;
@@ -219,7 +220,7 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
- }
+ }
}
static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
@@ -256,9 +257,10 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
/*
* vsc_sata_interrupt
*
- * Read the interrupt register and process for the devices that have them pending.
+ * Read the interrupt register and process for the devices that have
+ * them pending.
*/
-static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
+static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
unsigned int i;
@@ -287,7 +289,7 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
handled++;
} else
dev_printk(KERN_ERR, host->dev,
- ": interrupt from disabled port %d\n", i);
+ "interrupt from disabled port %d\n", i);
}
}
@@ -363,7 +365,8 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
}
-static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static const struct ata_port_info pi = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 8263a7b..e21c002 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -180,6 +180,7 @@ enum {
ATA_CMD_VERIFY_EXT = 0x42,
ATA_CMD_STANDBYNOW1 = 0xE0,
ATA_CMD_IDLEIMMEDIATE = 0xE1,
+ ATA_CMD_SLEEP = 0xE6,
ATA_CMD_INIT_DEV_PARAMS = 0x91,
ATA_CMD_READ_NATIVE_MAX = 0xF8,
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 6fd24e0..439d40f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -138,6 +138,7 @@ enum {
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
+ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
@@ -234,6 +235,13 @@ enum {
ATA_TMOUT_INTERNAL = 30 * HZ,
ATA_TMOUT_INTERNAL_QUICK = 5 * HZ,
+ /* FIXME: GoVault needs 2s but we can't afford that without
+ * parallel probing. 800ms is enough for iVDR disk
+ * HHD424020F7SV00. Increase to 2secs when parallel probing
+ * is in place.
+ */
+ ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
+
/* ATA bus states */
BUS_UNKNOWN = 0,
BUS_DMA = 1,
@@ -799,6 +807,7 @@ extern void ata_host_resume(struct ata_host *host);
extern int ata_ratelimit(void);
extern int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
+extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline);
extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
void *data, unsigned long delay);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
