Ok, here's yet another version that uses the device model for the
suspend/resume, rather than pci hooks.
Greg, DRM desperately needs review of its device model usage, can you
take a look at this patch and the current drm_sysfs.c code? Right now,
we're mixing class_devices and regular devices (the latter seem to be
required for suspend/resume to work correctly), but this seems wrong.
Any ideas? Should we just rip out the class_device stuff and create
full-on DRM device nodes?
This one also includes the feedback from Pavel & Rafael, along with
some fixes that were causing crashes during module unload or X startup.
Thanks,
Jesse
diff --git a/linux-core/Kconfig b/linux-core/Kconfig
diff --git a/linux-core/drmP.h b/linux-core/drmP.h
index d0ab2c9..39fce95 100644
--- a/linux-core/drmP.h
+++ b/linux-core/drmP.h
@@ -619,6 +619,8 @@ struct drm_driver {
void (*postclose) (struct drm_device *, struct drm_file *);
void (*lastclose) (struct drm_device *);
int (*unload) (struct drm_device *);
+ int (*suspend) (struct drm_device *);
+ int (*resume) (struct drm_device *);
int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
void (*dma_ready) (struct drm_device *);
int (*dma_quiescent) (struct drm_device *);
@@ -697,6 +699,7 @@ struct drm_head {
* may contain multiple heads.
*/
struct drm_device {
+ struct device dev; /**< Linux device */
char *unique; /**< Unique identifier: e.g., busid */
int unique_len; /**< Length of unique field */
char *devname; /**< For /proc/interrupts */
@@ -1164,7 +1167,8 @@ extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t *dmah);
struct drm_sysfs_class;
extern struct class *drm_sysfs_create(struct module *owner, char *name);
extern void drm_sysfs_destroy(struct class *cs);
-extern struct class_device *drm_sysfs_device_add(struct class *cs,
+extern struct class_device *drm_sysfs_device_add(struct drm_device *dev,
+ struct class *cs,
struct drm_head * head);
extern void drm_sysfs_device_remove(struct class_device *class_dev);
diff --git a/linux-core/drm_drv.c b/linux-core/drm_drv.c
diff --git a/linux-core/drm_stub.c b/linux-core/drm_stub.c
index 9e140ac..b0b1001 100644
--- a/linux-core/drm_stub.c
+++ b/linux-core/drm_stub.c
@@ -183,7 +183,8 @@ static int drm_get_head(struct drm_device * dev, struct drm_head * head)
goto err_g1;
}
- head->dev_class = drm_sysfs_device_add(drm_class, head);
+ head->dev_class = drm_sysfs_device_add(dev, drm_class,
+ head);
if (IS_ERR(head->dev_class)) {
printk(KERN_ERR
"DRM: Error sysfs_device_add.\n");
diff --git a/linux-core/drm_sysfs.c b/linux-core/drm_sysfs.c
index cf4349b..ce83c24 100644
--- a/linux-core/drm_sysfs.c
+++ b/linux-core/drm_sysfs.c
@@ -19,6 +19,30 @@
#include "drm_core.h"
#include "drmP.h"
+#define to_drm_device(d) container_of(d, struct drm_device, dev)
+
+static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
+{
+ struct drm_device *drm_dev = to_drm_device(dev);
+
+ printk(KERN_ERR "%s\n", __FUNCTION__);
+
+ if (drm_dev->driver->suspend)
+ return drm_dev->driver->suspend(drm_dev);
+
+ return 0;
+}
+
+static int drm_sysfs_resume(struct device *dev)
+{
+ struct drm_device *drm_dev = to_drm_device(dev);
+
+ if (drm_dev->driver->resume)
+ return drm_dev->driver->resume(drm_dev);
+
+ return 0;
+}
+
/* Display the version of drm_core. This doesn't work right in current design */
static ssize_t version_show(struct class *dev, char *buf)
{
@@ -50,6 +74,9 @@ struct class *drm_sysfs_create(struct module *owner, char *name)
goto err_out;
}
+ class->suspend = drm_sysfs_suspend;
+ class->resume = drm_sysfs_resume;
+
err = class_create_file(class, &class_attr_version);
if (err)
goto err_out_class;
@@ -73,7 +100,6 @@ void drm_sysfs_destroy(struct class *class)
{
if ((class == NULL) || (IS_ERR(class)))
return;
-
class_remove_file(class, &class_attr_version);
class_destroy(class);
}
@@ -104,10 +130,14 @@ static struct class_device_attribute class_device_attrs[] = {
* Note: the struct class passed to this function must have previously been
* created with a call to drm_sysfs_create().
*/
-struct class_device *drm_sysfs_device_add(struct class *cs, struct drm_head *head)
+struct class_device *drm_sysfs_device_add(struct drm_device *dev,
+ struct class *cs,
+ struct drm_head *head)
{
+ int err;
+#if 0
struct class_device *class_dev;
- int i, j, err;
+ int i, j;
class_dev = class_device_create(cs, NULL,
MKDEV(DRM_MAJOR, head->minor),
@@ -126,9 +156,17 @@ struct class_device *drm_sysfs_device_add(struct class *cs, struct drm_head *hea
if (err)
goto err_out_files;
}
+#endif
+ dev->dev.parent = &dev->pdev->dev;
+ dev->dev.class = cs;
+ snprintf(dev->dev.bus_id, BUS_ID_SIZE, "card%d", head->minor);
- return class_dev;
+ err = device_register(&dev->dev);
+ if (err)
+ DRM_ERROR("device add failed: %d\n", err);
+ return NULL;
+#if 0
err_out_files:
if (i > 0)
for (j = 0; j < i; j++)
@@ -136,6 +174,7 @@ err_out_files:
&class_device_attrs[i]);
class_device_unregister(class_dev);
err_out:
+#endif
return ERR_PTR(err);
}
@@ -148,9 +187,11 @@ err_out:
*/
void drm_sysfs_device_remove(struct class_device *class_dev)
{
+#if 0
int i;
for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
class_device_remove_file(class_dev, &class_device_attrs[i]);
class_device_unregister(class_dev);
+#endif
}
diff --git a/linux-core/i915_drv.c b/linux-core/i915_drv.c
index e337e1d..f34d218 100644
--- a/linux-core/i915_drv.c
+++ b/linux-core/i915_drv.c
@@ -69,6 +69,458 @@ static struct drm_bo_driver i915_bo_driver = {
};
#endif
+enum pipe {
+ PIPE_A = 0,
+ PIPE_B,
+};
+
+static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (pipe == PIPE_A)
+ return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE);
+ else
+ return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE);
+}
+
+static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B);
+ u32 *array;
+ int i;
+
+ if (!i915_pipe_enabled(dev, pipe))
+ return;
+
+ if (pipe == PIPE_A)
+ array = dev_priv->save_palette_a;
+ else
+ array = dev_priv->save_palette_b;
+
+ for(i = 0; i < 256; i++)
+ array[i] = I915_READ(reg + (i << 2));
+}
+
+static void i915_restore_palette(struct drm_device *dev, enum pipe pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B);
+ u32 *array;
+ int i;
+
+ if (!i915_pipe_enabled(dev, pipe))
+ return;
+
+ if (pipe == PIPE_A)
+ array = dev_priv->save_palette_a;
+ else
+ array = dev_priv->save_palette_b;
+
+ for(i = 0; i < 256; i++)
+ I915_WRITE(reg + (i << 2), array[i]);
+}
+
+static u8 i915_read_indexed(u16 index_port, u16 data_port, u8 reg)
+{
+ outb(reg, index_port);
+ return inb(data_port);
+}
+
+static u8 i915_read_ar(u16 st01, u8 reg, u16 palette_enable)
+{
+ inb(st01);
+ outb(palette_enable | reg, VGA_AR_INDEX);
+ return inb(VGA_AR_DATA_READ);
+}
+
+static void i915_write_ar(u8 st01, u8 reg, u8 val, u16 palette_enable)
+{
+ inb(st01);
+ outb(palette_enable | reg, VGA_AR_INDEX);
+ outb(val, VGA_AR_DATA_WRITE);
+}
+
+static void i915_write_indexed(u16 index_port, u16 data_port, u8 reg, u8 val)
+{
+ outb(reg, index_port);
+ outb(val, data_port);
+}
+
+static void i915_save_vga(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+ u16 cr_index, cr_data, st01;
+
+ /* VGA color palette registers */
+ dev_priv->saveDACMASK = inb(VGA_DACMASK);
+ /* DACCRX automatically increments during read */
+ outb(0, VGA_DACRX);
+ /* Read 3 bytes of color data from each index */
+ for (i = 0; i < 256 * 3; i++)
+ dev_priv->saveDACDATA[i] = inb(VGA_DACDATA);
+
+ /* MSR bits */
+ dev_priv->saveMSR = inb(VGA_MSR_READ);
+ if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+ cr_index = VGA_CR_INDEX_CGA;
+ cr_data = VGA_CR_DATA_CGA;
+ st01 = VGA_ST01_CGA;
+ } else {
+ cr_index = VGA_CR_INDEX_MDA;
+ cr_data = VGA_CR_DATA_MDA;
+ st01 = VGA_ST01_MDA;
+ }
+
+ /* CRT controller regs */
+ i915_write_indexed(cr_index, cr_data, 0x11,
+ i915_read_indexed(cr_index, cr_data, 0x11) &
+ (~0x80));
+ for (i = 0; i < 0x24; i++)
+ dev_priv->saveCR[i] =
+ i915_read_indexed(cr_index, cr_data, i);
+ /* Make sure we don't turn off CR group 0 writes */
+ dev_priv->saveCR[0x11] &= ~0x80;
+
+ /* Attribute controller registers */
+ inb(st01);
+ dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX);
+ for (i = 0; i < 20; i++)
+ dev_priv->saveAR[i] = i915_read_ar(st01, i, 0);
+ inb(st01);
+ outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX);
+
+ /* Graphics controller registers */
+ for (i = 0; i < 9; i++)
+ dev_priv->saveGR[i] =
+ i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, i);
+
+ dev_priv->saveGR[0x10] =
+ i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10);
+ dev_priv->saveGR[0x11] =
+ i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11);
+ dev_priv->saveGR[0x18] =
+ i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18);
+
+ /* Sequencer registers */
+ for (i = 0; i < 8; i++)
+ dev_priv->saveSR[i] =
+ i915_read_indexed(VGA_SR_INDEX, VGA_SR_DATA, i);
+}
+
+static void i915_restore_vga(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+ u16 cr_index, cr_data, st01;
+
+ /* MSR bits */
+ outb(dev_priv->saveMSR, VGA_MSR_WRITE);
+ if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+ cr_index = VGA_CR_INDEX_CGA;
+ cr_data = VGA_CR_DATA_CGA;
+ st01 = VGA_ST01_CGA;
+ } else {
+ cr_index = VGA_CR_INDEX_MDA;
+ cr_data = VGA_CR_DATA_MDA;
+ st01 = VGA_ST01_MDA;
+ }
+
+ /* Sequencer registers, don't write SR07 */
+ for (i = 0; i < 7; i++)
+ i915_write_indexed(VGA_SR_INDEX, VGA_SR_DATA, i,
+ dev_priv->saveSR[i]);
+
+ /* CRT controller regs */
+ /* Enable CR group 0 writes */
+ i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]);
+ for (i = 0; i < 0x24; i++)
+ i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]);
+
+ /* Graphics controller regs */
+ for (i = 0; i < 9; i++)
+ i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, i,
+ dev_priv->saveGR[i]);
+
+ i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10,
+ dev_priv->saveGR[0x10]);
+ i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11,
+ dev_priv->saveGR[0x11]);
+ i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18,
+ dev_priv->saveGR[0x18]);
+
+ /* Attribute controller registers */
+ for (i = 0; i < 20; i++)
+ i915_write_ar(st01, i, dev_priv->saveAR[i], 0);
+ inb(st01); /* switch back to index mode */
+ outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX);
+
+ /* VGA color palette registers */
+ outb(dev_priv->saveDACMASK, VGA_DACMASK);
+ /* DACCRX automatically increments during read */
+ outb(0, VGA_DACWX);
+ /* Read 3 bytes of color data from each index */
+ for (i = 0; i < 256 * 3; i++)
+ outb(dev_priv->saveDACDATA[i], VGA_DACDATA);
+
+}
+
+static int i915_suspend(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ if (!dev || !dev_priv) {
+ printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
+ printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+ return -ENODEV;
+ }
+
+ pci_save_state(dev->pdev);
+ pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+ /* Pipe & plane A info */
+ dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
+ dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
+ dev_priv->saveFPA0 = I915_READ(FPA0);
+ dev_priv->saveFPA1 = I915_READ(FPA1);
+ dev_priv->saveDPLL_A = I915_READ(DPLL_A);
+ if (IS_I965G(dev))
+ dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD);
+ dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A);
+ dev_priv->saveHBLANK_A = I915_READ(HBLANK_A);
+ dev_priv->saveHSYNC_A = I915_READ(HSYNC_A);
+ dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A);
+ dev_priv->saveVBLANK_A = I915_READ(VBLANK_A);
+ dev_priv->saveVSYNC_A = I915_READ(VSYNC_A);
+ dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+ dev_priv->saveDSPACNTR = I915_READ(DSPACNTR);
+ dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE);
+ dev_priv->saveDSPASIZE = I915_READ(DSPASIZE);
+ dev_priv->saveDSPAPOS = I915_READ(DSPAPOS);
+ dev_priv->saveDSPABASE = I915_READ(DSPABASE);
+ if (IS_I965G(dev)) {
+ dev_priv->saveDSPASURF = I915_READ(DSPASURF);
+ dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF);
+ }
+ i915_save_palette(dev, PIPE_A);
+
+ /* Pipe & plane B info */
+ dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF);
+ dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC);
+ dev_priv->saveFPB0 = I915_READ(FPB0);
+ dev_priv->saveFPB1 = I915_READ(FPB1);
+ dev_priv->saveDPLL_B = I915_READ(DPLL_B);
+ if (IS_I965G(dev))
+ dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD);
+ dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B);
+ dev_priv->saveHBLANK_B = I915_READ(HBLANK_B);
+ dev_priv->saveHSYNC_B = I915_READ(HSYNC_B);
+ dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B);
+ dev_priv->saveVBLANK_B = I915_READ(VBLANK_B);
+ dev_priv->saveVSYNC_B = I915_READ(VSYNC_B);
+ dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+ dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR);
+ dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE);
+ dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE);
+ dev_priv->saveDSPBPOS = I915_READ(DSPBPOS);
+ dev_priv->saveDSPBBASE = I915_READ(DSPBBASE);
+ if (IS_I965GM(dev)) {
+ dev_priv->saveDSPBSURF = I915_READ(DSPBSURF);
+ dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF);
+ }
+ i915_save_palette(dev, PIPE_B);
+
+ /* CRT state */
+ dev_priv->saveADPA = I915_READ(ADPA);
+
+ /* LVDS state */
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ if (!IS_I830(dev) && !IS_845G(dev))
+ dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
+ dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON);
+ dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF);
+ dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE);
+
+ /* FIXME: save TV & SDVO state */
+
+ /* FBC state */
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+
+ /* VGA state */
+ dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0);
+ dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1);
+ dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV);
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+ /* Scratch space */
+ for (i = 0; i < 16; i++) {
+ dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2));
+ dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+ }
+ for (i = 0; i < 3; i++)
+ dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+ i915_save_vga(dev);
+
+ /* Shut down the device */
+ pci_disable_device(dev->pdev);
+ pci_set_power_state(dev->pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int i915_resume(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_set_power_state(dev->pdev, PCI_D0);
+ pci_restore_state(dev->pdev);
+ if (pci_enable_device(dev->pdev))
+ return -1;
+
+ pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+ /* Pipe & plane A info */
+ /* Prime the clock */
+ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
+ I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+ ~DPLL_VCO_ENABLE);
+ udelay(150);
+ }
+ I915_WRITE(FPA0, dev_priv->saveFPA0);
+ I915_WRITE(FPA1, dev_priv->saveFPA1);
+ /* Actually enable it */
+ I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+ udelay(150);
+ if (IS_I965G(dev))
+ I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
+ udelay(150);
+
+ /* Restore mode */
+ I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
+ I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
+ I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
+ I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
+ I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
+ I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
+ I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+ /* Restore plane info */
+ I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
+ I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
+ I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
+ I915_WRITE(DSPABASE, dev_priv->saveDSPABASE);
+ I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
+ if (IS_I965G(dev)) {
+ I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
+ I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
+ }
+ I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
+ i915_restore_palette(dev, PIPE_A);
+ /* Enable the plane */
+ I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
+ I915_WRITE(DSPABASE, I915_READ(DSPABASE));
+
+ /* Pipe & plane B info */
+ if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
+ I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+ ~DPLL_VCO_ENABLE);
+ udelay(150);
+ }
+ I915_WRITE(FPB0, dev_priv->saveFPB0);
+ I915_WRITE(FPB1, dev_priv->saveFPB1);
+ /* Actually enable it */
+ I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+ udelay(150);
+ if (IS_I965G(dev))
+ I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
+ udelay(150);
+
+ /* Restore mode */
+ I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
+ I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
+ I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
+ I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
+ I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
+ I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
+ I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+ /* Restore plane info */
+ I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
+ I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
+ I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
+ I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE);
+ I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
+ if (IS_I965G(dev)) {
+ I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
+ I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
+ }
+ I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
+ i915_restore_palette(dev, PIPE_A);
+ /* Enable the plane */
+ I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
+ I915_WRITE(DSPBBASE, I915_READ(DSPBBASE));
+
+ /* CRT state */
+ I915_WRITE(ADPA, dev_priv->saveADPA);
+
+ /* LVDS state */
+ if (IS_I965G(dev))
+ I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ I915_WRITE(LVDS, dev_priv->saveLVDS);
+ if (!IS_I830(dev) && !IS_845G(dev))
+ I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
+
+ I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+ I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON);
+ I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF);
+ I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE);
+ I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+
+ /* FIXME: restore TV & SDVO state */
+
+ /* FBC info */
+ I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+ I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+ I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+ I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+
+ /* VGA state */
+ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+ I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0);
+ I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1);
+ I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV);
+ udelay(150);
+
+ for (i = 0; i < 16; i++) {
+ I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]);
+ I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+ }
+ for (i = 0; i < 3; i++)
+ I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
+
+ i915_restore_vga(dev);
+
+ return 0;
+}
+
static int probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static struct drm_driver driver = {
/* don't use mtrr's here, the Xserver or user space app should
@@ -79,9 +531,12 @@ static struct drm_driver driver = {
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL |
DRIVER_IRQ_VBL2,
.load = i915_driver_load,
+ .unload = i915_driver_unload,
.firstopen = i915_driver_firstopen,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
+ .suspend = i915_suspend,
+ .resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.vblank_wait = i915_driver_vblank_wait,
.vblank_wait2 = i915_driver_vblank_wait2,
diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c
index b116863..24a4ec4 100644
--- a/shared-core/i915_dma.c
+++ b/shared-core/i915_dma.c
@@ -31,17 +31,6 @@
#include "i915_drm.h"
#include "i915_drv.h"
-#define IS_I965G(dev) (dev->pci_device == 0x2972 || \
- dev->pci_device == 0x2982 || \
- dev->pci_device == 0x2992 || \
- dev->pci_device == 0x29A2 || \
- dev->pci_device == 0x2A02 || \
- dev->pci_device == 0x2A12)
-
-#define IS_G33(dev) (dev->pci_device == 0x29C2 || \
- dev->pci_device == 0x29B2 || \
- dev->pci_device == 0x29D2)
-
/* Really want an OS-independent resettable timer. Would like to have
* this loop run for (eg) 3 sec, but have the timer reset every time
* the head pointer changes, so that EBUSY only happens if the ring
@@ -91,6 +80,7 @@ void i915_kernel_lost_context(struct drm_device * dev)
static int i915_dma_cleanup(struct drm_device * dev)
{
+ drm_i915_private_t *dev_priv = dev->dev_private;
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
@@ -98,50 +88,42 @@ static int i915_dma_cleanup(struct drm_device * dev)
if (dev->irq)
drm_irq_uninstall(dev);
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv =
- (drm_i915_private_t *) dev->dev_private;
-
- if (dev_priv->ring.virtual_start) {
- drm_core_ioremapfree(&dev_priv->ring.map, dev);
- }
+ if (dev_priv->ring.virtual_start) {
+ drm_core_ioremapfree(&dev_priv->ring.map, dev);
+ dev_priv->ring.virtual_start = 0;
+ dev_priv->ring.map.handle = 0;
+ dev_priv->ring.map.size = 0;
+ }
- if (dev_priv->status_page_dmah) {
- drm_pci_free(dev, dev_priv->status_page_dmah);
- /* Need to rewrite hardware status page */
- I915_WRITE(0x02080, 0x1ffff000);
- }
- if (dev_priv->status_gfx_addr) {
- dev_priv->status_gfx_addr = 0;
- drm_core_ioremapfree(&dev_priv->hws_map, dev);
- I915_WRITE(0x02080, 0x1ffff000);
- }
- drm_free(dev->dev_private, sizeof(drm_i915_private_t),
- DRM_MEM_DRIVER);
+ if (dev_priv->status_page_dmah) {
+ drm_pci_free(dev, dev_priv->status_page_dmah);
+ dev_priv->status_page_dmah = NULL;
+ /* Need to rewrite hardware status page */
+ I915_WRITE(0x02080, 0x1ffff000);
+ }
- dev->dev_private = NULL;
+ if (dev_priv->status_gfx_addr) {
+ dev_priv->status_gfx_addr = 0;
+ drm_core_ioremapfree(&dev_priv->hws_map, dev);
+ I915_WRITE(0x02080, 0x1ffff000);
}
return 0;
}
-static int i915_initialize(struct drm_device * dev,
- drm_i915_private_t * dev_priv,
- drm_i915_init_t * init)
+static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
{
- memset(dev_priv, 0, sizeof(drm_i915_private_t));
+ drm_i915_private_t *dev_priv = dev->dev_private;
dev_priv->sarea = drm_getsarea(dev);
if (!dev_priv->sarea) {
DRM_ERROR("can not find sarea!\n");
- dev->dev_private = (void *)dev_priv;
i915_dma_cleanup(dev);
return -EINVAL;
}
dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset);
if (!dev_priv->mmio_map) {
- dev->dev_private = (void *)dev_priv;
i915_dma_cleanup(dev);
DRM_ERROR("can not find mmio map!\n");
return -EINVAL;
@@ -168,7 +150,6 @@ static int i915_initialize(struct drm_device * dev,
drm_core_ioremap(&dev_priv->ring.map, dev);
if (dev_priv->ring.map.handle == NULL) {
- dev->dev_private = (void *)dev_priv;
i915_dma_cleanup(dev);
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
@@ -199,7 +180,6 @@ static int i915_initialize(struct drm_device * dev,
drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff);
if (!dev_priv->status_page_dmah) {
- dev->dev_private = (void *)dev_priv;
i915_dma_cleanup(dev);
DRM_ERROR("Can not allocate hardware status page\n");
return -ENOMEM;
@@ -212,7 +192,6 @@ static int i915_initialize(struct drm_device * dev,
I915_WRITE(0x02080, dev_priv->dma_status_page);
}
DRM_DEBUG("Enabled hardware status page\n");
- dev->dev_private = (void *)dev_priv;
mutex_init(&dev_priv->cmdbuf_mutex);
return 0;
}
@@ -258,17 +237,12 @@ static int i915_dma_resume(struct drm_device * dev)
static int i915_dma_init(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv;
drm_i915_init_t *init = data;
int retcode = 0;
switch (init->func) {
case I915_INIT_DMA:
- dev_priv = drm_alloc(sizeof(drm_i915_private_t),
- DRM_MEM_DRIVER);
- if (dev_priv == NULL)
- return -ENOMEM;
- retcode = i915_initialize(dev, dev_priv, init);
+ retcode = i915_initialize(dev, init);
break;
case I915_CLEANUP_DMA:
retcode = i915_dma_cleanup(dev);
@@ -1299,7 +1273,6 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
drm_core_ioremap(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
- dev->dev_private = (void *)dev_priv;
i915_dma_cleanup(dev);
dev_priv->status_gfx_addr = 0;
DRM_ERROR("can not ioremap virtual address for"
@@ -1318,6 +1291,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long base, size;
+ int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+
/* i915 has 4 more counters */
dev->counters += 4;
dev->types[6] = _DRM_STAT_IRQ;
@@ -1325,25 +1302,52 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev->types[8] = _DRM_STAT_SECONDARY;
dev->types[9] = _DRM_STAT_DMA;
+ dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER);
+ if (dev_priv == NULL)
+ return -ENOMEM;
+
+ memset(dev_priv, 0, sizeof(drm_i915_private_t));
+
+ dev->dev_private = (void *)dev_priv;
+
+ /* Add register map (needed for suspend/resume) */
+ base = drm_get_resource_start(dev, mmio_bar);
+ size = drm_get_resource_len(dev, mmio_bar);
+
+ ret = drm_addmap(dev, base, size, _DRM_REGISTERS, _DRM_KERNEL,
+ &dev_priv->mmio_map);
+
+ return ret;
+}
+
+int i915_driver_unload(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->mmio_map)
+ drm_rmmap(dev, dev_priv->mmio_map);
+
+ drm_free(dev->dev_private, sizeof(drm_i915_private_t),
+ DRM_MEM_DRIVER);
return 0;
}
void i915_driver_lastclose(struct drm_device * dev)
{
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ if (drm_getsarea(dev) && dev_priv->sarea_priv)
i915_do_cleanup_pageflip(dev);
+ if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
- }
+
i915_dma_cleanup(dev);
}
void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
{
- if (dev->dev_private) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- i915_mem_release(dev, file_priv, dev_priv->agp_heap);
- }
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ i915_mem_release(dev, file_priv, dev_priv->agp_heap);
}
struct drm_ioctl_desc i915_ioctls[] = {
diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h
index 817288b..07a173a 100644
--- a/shared-core/i915_drv.h
+++ b/shared-core/i915_drv.h
@@ -146,6 +146,88 @@ typedef struct drm_i915_private {
drm_i915_vbl_swap_t vbl_swaps;
unsigned int swaps_pending;
+ /* Register state */
+ u8 saveLBB;
+ u32 saveDSPACNTR;
+ u32 saveDSPBCNTR;
+ u32 savePIPEACONF;
+ u32 savePIPEBCONF;
+ u32 savePIPEASRC;
+ u32 savePIPEBSRC;
+ u32 saveFPA0;
+ u32 saveFPA1;
+ u32 saveDPLL_A;
+ u32 saveDPLL_A_MD;
+ u32 saveHTOTAL_A;
+ u32 saveHBLANK_A;
+ u32 saveHSYNC_A;
+ u32 saveVTOTAL_A;
+ u32 saveVBLANK_A;
+ u32 saveVSYNC_A;
+ u32 saveBCLRPAT_A;
+ u32 saveDSPASTRIDE;
+ u32 saveDSPASIZE;
+ u32 saveDSPAPOS;
+ u32 saveDSPABASE;
+ u32 saveDSPASURF;
+ u32 saveDSPATILEOFF;
+ u32 savePFIT_PGM_RATIOS;
+ u32 saveBLC_PWM_CTL;
+ u32 saveBLC_PWM_CTL2;
+ u32 saveFPB0;
+ u32 saveFPB1;
+ u32 saveDPLL_B;
+ u32 saveDPLL_B_MD;
+ u32 saveHTOTAL_B;
+ u32 saveHBLANK_B;
+ u32 saveHSYNC_B;
+ u32 saveVTOTAL_B;
+ u32 saveVBLANK_B;
+ u32 saveVSYNC_B;
+ u32 saveBCLRPAT_B;
+ u32 saveDSPBSTRIDE;
+ u32 saveDSPBSIZE;
+ u32 saveDSPBPOS;
+ u32 saveDSPBBASE;
+ u32 saveDSPBSURF;
+ u32 saveDSPBTILEOFF;
+ u32 saveVCLK_DIVISOR_VGA0;
+ u32 saveVCLK_DIVISOR_VGA1;
+ u32 saveVCLK_POST_DIV;
+ u32 saveVGACNTRL;
+ u32 saveADPA;
+ u32 saveLVDS;
+ u32 saveLVDSPP_ON;
+ u32 saveLVDSPP_OFF;
+ u32 saveDVOA;
+ u32 saveDVOB;
+ u32 saveDVOC;
+ u32 savePP_ON;
+ u32 savePP_OFF;
+ u32 savePP_CONTROL;
+ u32 savePP_CYCLE;
+ u32 savePFIT_CONTROL;
+ u32 save_palette_a[256];
+ u32 save_palette_b[256];
+ u32 saveFBC_CFB_BASE;
+ u32 saveFBC_LL_BASE;
+ u32 saveFBC_CONTROL;
+ u32 saveFBC_CONTROL2;
+ u32 saveSWF0[16];
+ u32 saveSWF1[16];
+ u32 saveSWF2[3];
+ u8 saveMSR;
+ u8 saveSR[8];
+ u8 saveGR[24];
+ u8 saveAR_INDEX;
+ u8 saveAR[20];
+ u8 saveDACMASK;
+ u8 saveDACDATA[256*3]; /* 256 3-byte colors */
+ u8 saveCR[36];
+ u8 savePLANE0[64*1024];
+ u8 savePLANE1[64*1024];
+ u8 savePLANE2[64*1024];
+ u8 savePLANE3[64*1024];
} drm_i915_private_t;
enum intel_chip_family {
@@ -161,6 +243,7 @@ extern int i915_max_ioctl;
/* i915_dma.c */
extern void i915_kernel_lost_context(struct drm_device * dev);
extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_unload(struct drm_device *);
extern void i915_driver_lastclose(struct drm_device * dev);
extern void i915_driver_preclose(struct drm_device *dev,
struct drm_file *file_priv);
@@ -273,6 +356,50 @@ extern int i915_move(struct drm_buffer_object *bo, int evict,
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
+/* Extended config space */
+#define LBB 0xf4
+
+/* VGA stuff */
+
+#define VGA_ST01_MDA 0x3ba
+#define VGA_ST01_CGA 0x3da
+
+#define VGA_MSR_WRITE 0x3c2
+#define VGA_MSR_READ 0x3cc
+#define VGA_MSR_MEM_EN (1<<1)
+#define VGA_MSR_CGA_MODE (1<<0)
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+#define VGA_AR_INDEX 0x3c0
+#define VGA_AR_VID_EN (1<<5)
+#define VGA_AR_DATA_WRITE 0x3c0
+#define VGA_AR_DATA_READ 0x3c1
+
+#define VGA_GR_INDEX 0x3ce
+#define VGA_GR_DATA 0x3cf
+/* GR05 */
+#define VGA_GR_MEM_READ_MODE_SHIFT 3
+#define VGA_GR_MEM_READ_MODE_PLANE 1
+/* GR06 */
+#define VGA_GR_MEM_MODE_MASK 0xc
+#define VGA_GR_MEM_MODE_SHIFT 2
+#define VGA_GR_MEM_A0000_AFFFF 0
+#define VGA_GR_MEM_A0000_BFFFF 1
+#define VGA_GR_MEM_B0000_B7FFF 2
+#define VGA_GR_MEM_B0000_BFFFF 3
+
+#define VGA_DACMASK 0x3c6
+#define VGA_DACRX 0x3c7
+#define VGA_DACWX 0x3c8
+#define VGA_DACDATA 0x3c9
+
+#define VGA_CR_INDEX_MDA 0x3b4
+#define VGA_CR_DATA_MDA 0x3b5
+#define VGA_CR_INDEX_CGA 0x3d4
+#define VGA_CR_DATA_CGA 0x3d5
+
#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23))
#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23))
#define CMD_REPORT_HEAD (7<<23)
@@ -295,6 +422,37 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
#define BB1_UNPROTECTED (0<<0)
#define BB2_END_ADDR_MASK (~0x7)
+/* Framebuffer compression */
+#define FBC_CFB_BASE 0x03200 /* 4k page aligned */
+#define FBC_LL_BASE 0x03204 /* 4k page aligned */
+#define FBC_CONTROL 0x03208
+#define FBC_CTL_EN (1<<31)
+#define FBC_CTL_PERIODIC (1<<30)
+#define FBC_CTL_INTERVAL_SHIFT (16)
+#define FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define FBC_CTL_STRIDE_SHIFT (5)
+#define FBC_CTL_FENCENO (1<<0)
+#define FBC_COMMAND 0x0320c
+#define FBC_CMD_COMPRESS (1<<0)
+#define FBC_STATUS 0x03210
+#define FBC_STAT_COMPRESSING (1<<31)
+#define FBC_STAT_COMPRESSED (1<<30)
+#define FBC_STAT_MODIFIED (1<<29)
+#define FBC_STAT_CURRENT_LINE (1<<0)
+#define FBC_CONTROL2 0x03214
+#define FBC_CTL_FENCE_DBL (0<<4)
+#define FBC_CTL_IDLE_IMM (0<<2)
+#define FBC_CTL_IDLE_FULL (1<<2)
+#define FBC_CTL_IDLE_LINE (2<<2)
+#define FBC_CTL_IDLE_DEBUG (3<<2)
+#define FBC_CTL_CPU_FENCE (1<<1)
+#define FBC_CTL_PLANEA (0<<0)
+#define FBC_CTL_PLANEB (1<<0)
+#define FBC_FENCE_OFF 0x0321b
+
+#define FBC_LL_SIZE (1536)
+#define FBC_LL_PAD (32)
+
/* Interrupt bits:
*/
#define USER_INT_FLAG (1<<1)
@@ -516,4 +674,509 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5])
#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
+
+#define BLC_PWM_CTL 0x61254
+#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
+
+#define BLC_PWM_CTL2 0x61250
+/**
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16)
+/**
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
+#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+
+#define I915_GCFGC 0xf0
+#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
+#define I915_DISPLAY_CLOCK_MASK (7 << 4)
+
+#define I855_HPLLCC 0xc0
+#define I855_CLOCK_CONTROL_MASK (3 << 0)
+#define I855_CLOCK_133_200 (0 << 0)
+#define I855_CLOCK_100_200 (1 << 0)
+#define I855_CLOCK_100_133 (2 << 0)
+#define I855_CLOCK_166_250 (3 << 0)
+
+/* p317, 319
+ */
+#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */
+#define VCLK2_VCO_N 0x600a
+#define VCLK2_VCO_DIV_SEL 0x6012
+
+#define VCLK_DIVISOR_VGA0 0x6000
+#define VCLK_DIVISOR_VGA1 0x6004
+#define VCLK_POST_DIV 0x6010
+/** Selects a post divisor of 4 instead of 2. */
+# define VGA1_PD_P2_DIV_4 (1 << 15)
+/** Overrides the p2 post divisor field */
+# define VGA1_PD_P1_DIV_2 (1 << 13)
+# define VGA1_PD_P1_SHIFT 8
+/** P1 value is 2 greater than this field */
+# define VGA1_PD_P1_MASK (0x1f << 8)
+/** Selects a post divisor of 4 instead of 2. */
+# define VGA0_PD_P2_DIV_4 (1 << 7)
+/** Overrides the p2 post divisor field */
+# define VGA0_PD_P1_DIV_2 (1 << 5)
+# define VGA0_PD_P1_SHIFT 0
+/** P1 value is 2 greater than this field */
+# define VGA0_PD_P1_MASK (0x1f << 0)
+
+/* I830 CRTC registers */
+#define HTOTAL_A 0x60000
+#define HBLANK_A 0x60004
+#define HSYNC_A 0x60008
+#define VTOTAL_A 0x6000c
+#define VBLANK_A 0x60010
+#define VSYNC_A 0x60014
+#define PIPEASRC 0x6001c
+#define BCLRPAT_A 0x60020
+#define VSYNCSHIFT_A 0x60028
+
+#define HTOTAL_B 0x61000
+#define HBLANK_B 0x61004
+#define HSYNC_B 0x61008
+#define VTOTAL_B 0x6100c
+#define VBLANK_B 0x61010
+#define VSYNC_B 0x61014
+#define PIPEBSRC 0x6101c
+#define BCLRPAT_B 0x61020
+#define VSYNCSHIFT_B 0x61028
+
+#define PP_STATUS 0x61200
+# define PP_ON (1 << 31)
+/**
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+# define PP_READY (1 << 30)
+# define PP_SEQUENCE_NONE (0 << 28)
+# define PP_SEQUENCE_ON (1 << 28)
+# define PP_SEQUENCE_OFF (2 << 28)
+# define PP_SEQUENCE_MASK 0x30000000
+#define PP_CONTROL 0x61204
+# define POWER_TARGET_ON (1 << 0)
+
+#define LVDSPP_ON 0x61208
+#define LVDSPP_OFF 0x6120c
+#define PP_CYCLE 0x61210
+
+#define PFIT_CONTROL 0x61230
+# define PFIT_ENABLE (1 << 31)
+# define PFIT_PIPE_MASK (3 << 29)
+# define PFIT_PIPE_SHIFT 29
+# define VERT_INTERP_DISABLE (0 << 10)
+# define VERT_INTERP_BILINEAR (1 << 10)
+# define VERT_INTERP_MASK (3 << 10)
+# define VERT_AUTO_SCALE (1 << 9)
+# define HORIZ_INTERP_DISABLE (0 << 6)
+# define HORIZ_INTERP_BILINEAR (1 << 6)
+# define HORIZ_INTERP_MASK (3 << 6)
+# define HORIZ_AUTO_SCALE (1 << 5)
+# define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+
+#define PFIT_PGM_RATIOS 0x61234
+# define PFIT_VERT_SCALE_MASK 0xfff00000
+# define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+
+#define PFIT_AUTO_RATIOS 0x61238
+
+
+#define DPLL_A 0x06014
+#define DPLL_B 0x06018
+# define DPLL_VCO_ENABLE (1 << 31)
+# define DPLL_DVO_HIGH_SPEED (1 << 30)
+# define DPLL_SYNCLOCK_ENABLE (1 << 29)
+# define DPLL_VGA_MODE_DIS (1 << 28)
+# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
+# define DPLLB_MODE_LVDS (2 << 26) /* i915 */
+# define DPLL_MODE_MASK (3 << 26)
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
+# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
+# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
+/**
+ * The i830 generation, in DAC/serial mode, defines p1 as two plus this
+ * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
+/**
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
+# define DPLL_FPA01_P1_POST_DIV_SHIFT 16
+# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */
+# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
+# define PLL_REF_INPUT_DREFCLK (0 << 13)
+# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
+# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */
+# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+# define PLL_REF_INPUT_MASK (3 << 13)
+# define PLL_LOAD_PULSE_PHASE_SHIFT 9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+# define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
+
+/**
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+# define SDVO_MULTIPLIER_MASK 0x000000ff
+# define SDVO_MULTIPLIER_SHIFT_HIRES 4
+# define SDVO_MULTIPLIER_SHIFT_VGA 0
+
+/** @defgroup DPLL_MD
+ * @{
+ */
+/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_A_MD 0x0601c
+/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_B_MD 0x06020
+/**
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1. Must be set to 1 pixel for SDVO.
+ */
+# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
+# define DPLL_MD_UDI_DIVIDER_SHIFT 24
+/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
+# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
+/**
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock. At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
+# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
+/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
+# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
+/** @} */
+
+#define DPLL_TEST 0x606c
+# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
+# define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
+# define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
+# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
+# define DPLLB_TEST_N_BYPASS (1 << 19)
+# define DPLLB_TEST_M_BYPASS (1 << 18)
+# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
+# define DPLLA_TEST_N_BYPASS (1 << 3)
+# define DPLLA_TEST_M_BYPASS (1 << 2)
+# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
+
+#define ADPA 0x61100
+#define ADPA_DAC_ENABLE (1<<31)
+#define ADPA_DAC_DISABLE 0
+#define ADPA_PIPE_SELECT_MASK (1<<30)
+#define ADPA_PIPE_A_SELECT 0
+#define ADPA_PIPE_B_SELECT (1<<30)
+#define ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define ADPA_SETS_HVPOLARITY 0
+#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define ADPA_VSYNC_CNTL_ENABLE 0
+#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define ADPA_HSYNC_CNTL_ENABLE 0
+#define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define ADPA_VSYNC_ACTIVE_LOW 0
+#define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define ADPA_HSYNC_ACTIVE_LOW 0
+
+#define FPA0 0x06040
+#define FPA1 0x06044
+#define FPB0 0x06048
+#define FPB1 0x0604c
+# define FP_N_DIV_MASK 0x003f0000
+# define FP_N_DIV_SHIFT 16
+# define FP_M1_DIV_MASK 0x00003f00
+# define FP_M1_DIV_SHIFT 8
+# define FP_M2_DIV_MASK 0x0000003f
+# define FP_M2_DIV_SHIFT 0
+
+
+#define PORT_HOTPLUG_EN 0x61110
+# define SDVOB_HOTPLUG_INT_EN (1 << 26)
+# define SDVOC_HOTPLUG_INT_EN (1 << 25)
+# define TV_HOTPLUG_INT_EN (1 << 18)
+# define CRT_HOTPLUG_INT_EN (1 << 9)
+# define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
+
+#define PORT_HOTPLUG_STAT 0x61114
+# define CRT_HOTPLUG_INT_STATUS (1 << 11)
+# define TV_HOTPLUG_INT_STATUS (1 << 10)
+# define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
+# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
+# define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
+# define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
+# define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
+# define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
+
+#define SDVOB 0x61140
+#define SDVOC 0x61160
+#define SDVO_ENABLE (1 << 31)
+#define SDVO_PIPE_B_SELECT (1 << 30)
+#define SDVO_STALL_SELECT (1 << 29)
+#define SDVO_INTERRUPT_ENABLE (1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT 23
+#define SDVO_PHASE_SELECT_MASK (15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
+#define SDVOC_GANG_MODE (1 << 16)
+#define SDVO_BORDER_ENABLE (1 << 7)
+#define SDVOB_PCIE_CONCURRENCY (1 << 3)
+#define SDVO_DETECTED (1 << 2)
+/* Bits to be preserved when writing */
+#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
+#define SDVOC_PRESERVE_MASK (1 << 17)
+
+/** @defgroup LVDS
+ * @{
+ */
+/**
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
+#define LVDS 0x61180
+/**
+ * Enables the LVDS port. This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+# define LVDS_PORT_EN (1 << 31)
+/** Selects pipe B for LVDS data. Must be set on pre-965. */
+# define LVDS_PIPEB_SELECT (1 << 30)
+
+/**
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
+# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
+# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
+/**
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+# define LVDS_A3_POWER_MASK (3 << 6)
+# define LVDS_A3_POWER_DOWN (0 << 6)
+# define LVDS_A3_POWER_UP (3 << 6)
+/**
+ * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+# define LVDS_CLKB_POWER_MASK (3 << 4)
+# define LVDS_CLKB_POWER_DOWN (0 << 4)
+# define LVDS_CLKB_POWER_UP (3 << 4)
+
+/**
+ * Controls the B0-B3 data pairs. This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode. The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+# define LVDS_B0B3_POWER_MASK (3 << 2)
+# define LVDS_B0B3_POWER_DOWN (0 << 2)
+# define LVDS_B0B3_POWER_UP (3 << 2)
+
+#define PIPEACONF 0x70008
+#define PIPEACONF_ENABLE (1<<31)
+#define PIPEACONF_DISABLE 0
+#define PIPEACONF_DOUBLE_WIDE (1<<30)
+#define I965_PIPECONF_ACTIVE (1<<30)
+#define PIPEACONF_SINGLE_WIDE 0
+#define PIPEACONF_PIPE_UNLOCKED 0
+#define PIPEACONF_PIPE_LOCKED (1<<25)
+#define PIPEACONF_PALETTE 0
+#define PIPEACONF_GAMMA (1<<24)
+#define PIPECONF_FORCE_BORDER (1<<25)
+#define PIPECONF_PROGRESSIVE (0 << 21)
+#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
+#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
+
+#define PIPEBCONF 0x71008
+#define PIPEBCONF_ENABLE (1<<31)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_DOUBLE_WIDE (1<<30)
+#define PIPEBCONF_DISABLE 0
+#define PIPEBCONF_GAMMA (1<<24)
+#define PIPEBCONF_PALETTE 0
+
+#define PIPEBGCMAXRED 0x71010
+#define PIPEBGCMAXGREEN 0x71014
+#define PIPEBGCMAXBLUE 0x71018
+#define PIPEBSTAT 0x71024
+#define PIPEBFRAMEHIGH 0x71040
+#define PIPEBFRAMEPIXEL 0x71044
+
+#define DSPACNTR 0x70180
+#define DSPBCNTR 0x71180
+#define DISPLAY_PLANE_ENABLE (1<<31)
+#define DISPLAY_PLANE_DISABLE 0
+#define DISPPLANE_GAMMA_ENABLE (1<<30)
+#define DISPPLANE_GAMMA_DISABLE 0
+#define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
+#define DISPPLANE_8BPP (0x2<<26)
+#define DISPPLANE_15_16BPP (0x4<<26)
+#define DISPPLANE_16BPP (0x5<<26)
+#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
+#define DISPPLANE_32BPP (0x7<<26)
+#define DISPPLANE_STEREO_ENABLE (1<<25)
+#define DISPPLANE_STEREO_DISABLE 0
+#define DISPPLANE_SEL_PIPE_MASK (1<<24)
+#define DISPPLANE_SEL_PIPE_A 0
+#define DISPPLANE_SEL_PIPE_B (1<<24)
+#define DISPPLANE_SRC_KEY_ENABLE (1<<22)
+#define DISPPLANE_SRC_KEY_DISABLE 0
+#define DISPPLANE_LINE_DOUBLE (1<<20)
+#define DISPPLANE_NO_LINE_DOUBLE 0
+#define DISPPLANE_STEREO_POLARITY_FIRST 0
+#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+/* plane B only */
+#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
+#define DISPPLANE_ALPHA_TRANS_DISABLE 0
+#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
+#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
+
+#define DSPABASE 0x70184
+#define DSPASTRIDE 0x70188
+
+#define DSPBBASE 0x71184
+#define DSPBADDR DSPBBASE
+#define DSPBSTRIDE 0x71188
+
+#define DSPAKEYVAL 0x70194
+#define DSPAKEYMASK 0x70198
+
+#define DSPAPOS 0x7018C /* reserved */
+#define DSPASIZE 0x70190
+#define DSPBPOS 0x7118C
+#define DSPBSIZE 0x71190
+
+#define DSPASURF 0x7019C
+#define DSPATILEOFF 0x701A4
+
+#define DSPBSURF 0x7119C
+#define DSPBTILEOFF 0x711A4
+
+#define VGACNTRL 0x71400
+# define VGA_DISP_DISABLE (1 << 31)
+# define VGA_2X_MODE (1 << 30)
+# define VGA_PIPE_B_SELECT (1 << 29)
+
+/*
+ * Some BIOS scratch area registers. The 845 (and 830?) store the amount
+ * of video memory available to the BIOS in SWF1.
+ */
+
+#define SWF0 0x71410
+
+/*
+ * 855 scratch registers.
+ */
+#define SWF10 0x70410
+
+#define SWF30 0x72414
+
+/*
+ * Overlay registers. These are overlay registers accessed via MMIO.
+ * Those loaded via the overlay register page are defined in i830_video.c.
+ */
+#define OVADD 0x30000
+
+#define DOVSTA 0x30008
+#define OC_BUF (0x3<<20)
+
+#define OGAMC5 0x30010
+#define OGAMC4 0x30014
+#define OGAMC3 0x30018
+#define OGAMC2 0x3001c
+#define OGAMC1 0x30020
+#define OGAMC0 0x30024
+/*
+ * Palette registers
+ */
+#define PALETTE_A 0x0a000
+#define PALETTE_B 0x0a800
+
+#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC)
+#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG)
+#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG)
+
+#define IS_I915G(dev) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/
+#define IS_I915GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG)
+#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG)
+#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG)
+
+#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
+ (dev)->pci_device == 0x2982 || \
+ (dev)->pci_device == 0x2992 || \
+ (dev)->pci_device == 0x29A2 || \
+ (dev)->pci_device == 0x2A02 || \
+ (dev)->pci_device == 0x2A12)
+
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+
+#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
+ (dev)->pci_device == 0x29B2 || \
+ (dev)->pci_device == 0x29D2)
+
+#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
+ IS_I945GM(dev) || IS_I965G(dev))
+
+#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
+ IS_I945GM(dev) || IS_I965GM(dev))
+
+#define PRIMARY_RINGBUFFER_SIZE (128*1024)
+
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
