On Thu, Oct 25 2007, FUJITA Tomonori wrote:
> Jens, I should have CC'ed to you.
>
> On Thu, 25 Oct 2007 10:22:02 +0900
> FUJITA Tomonori <[email protected]> wrote:
>
> > On Thu, 25 Oct 2007 01:40:00 +0100
> > Sid Boyce <[email protected]> wrote:
> >
> > > x86_64 dual, gcc version 4.2.2 (SUSE Linux).
> > > ------------[ cut here ]------------
> > > kernel BUG at include/linux/scatterlist.h:50!
> > > invalid opcode: 0000 [1] SMP
> > > CPU 1
> > > Modules linked in: ub crc_itu_t hwmon cdrom soundcore v4l1_compat
> > > videobuf_core btcx_risc ff_memless floppy sg forcedeth ehci_hcd ohci_hcd
> > > sd_mod usbcore jfs edd ext3 mbcache jbd fan pata_jmicron ahci sata_nv
> > > pata_amd libata scsi_mod thermal processor
> > > Pid: 0, comm: swapper Not tainted 2.6.24-rc1-smp #1
> > > RIP: 0010:[<ffffffff881f3d27>] [<ffffffff881f3d27>]
> > > :ub:ub_state_sense+0x9a/0x169
> > > RSP: 0018:ffff810100697e60 EFLAGS: 00010093
> > > RAX: 0000000087654321 RBX: ffff810105d55000 RCX: ffff81011f975540
> > > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81011f975540
> > > RBP: ffff810105d51000 R08: 0000000000000000 R09: ffff810105d55098
> > > R10: ffff810001c319b8 R11: 0000000000000286 R12: ffff810105d55098
> > > R13: ffff810105d55260 R14: ffff810105d55278 R15: ffff810105d55298
> > > FS: 00002afb8597c6f0(0000) GS:ffff810100001800(0000) knlGS:0000000000000000
> > > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > > CR2: 00002afb8548200f CR3: 000000010615b000 CR4: 00000000000006e0
> > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > > Process swapper (pid: 0, threadinfo ffff810100690000, task ffff810100689160)
> > > Stack: 0000000000000001 ffff810105d55000 ffff810105d51000 0000000000000000
> > > ffff810105d55260 ffffffff881f4d43 ffff810105919998 ffff810105d553a0
> > > ffff810105d553af ffff810105d55348 0000000000000286 ffff810105d55058
> > > Call Trace:
> > > <IRQ> [<ffffffff881f4d43>] :ub:ub_scsi_action+0x1e3/0x214
> > > [<ffffffff8023a34e>] tasklet_action+0x54/0x97
> > > [<ffffffff8023a261>] __do_softirq+0x65/0xce
> > > [<ffffffff8020d0bc>] call_softirq+0x1c/0x28
> > > [<ffffffff8020e634>] do_softirq+0x2c/0x7d
> > > [<ffffffff8023a1b7>] irq_exit+0x3f/0x84
> > > [<ffffffff8020e7c3>] do_IRQ+0x13e/0x15f
> > > [<ffffffff8020afa0>] default_idle+0x0/0x3d
> > > [<ffffffff8020afa0>] default_idle+0x0/0x3d
> > > [<ffffffff8020c441>] ret_from_intr+0x0/0xa
> > > <EOI> [<ffffffff8020afc9>] default_idle+0x29/0x3d
> > > [<ffffffff8020b070>] cpu_idle+0x93/0xbb
> >
> > Can you try this?
> >
> > Thanks,
> >
> > diff --git a/drivers/block/ub.c b/drivers/block/ub.c
> > index 14143f2..78f158f 100644
> > --- a/drivers/block/ub.c
> > +++ b/drivers/block/ub.c
> > @@ -1428,6 +1428,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
> > scmd->state = UB_CMDST_INIT;
> > scmd->nsg = 1;
> > sg = &scmd->sgv[0];
> > + sg_init_table(sg, UB_MAX_REQ_SG);
> > sg_set_page(sg, virt_to_page(sc->top_sense));
> > sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
> > sg->length = UB_SENSE_SIZE;
> > @@ -1864,6 +1865,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
> > cmd->state = UB_CMDST_INIT;
> > cmd->nsg = 1;
> > sg = &cmd->sgv[0];
> > + sg_init_table(sg, UB_MAX_REQ_SG);
> > sg_set_page(sg, virt_to_page(p));
> > sg->offset = (unsigned long)p & (PAGE_SIZE-1);
> > sg->length = 8;
>
> Here's a modified version for your sg branch (for sg_set_page API
> changes).
>
> -
> From: FUJITA Tomonori <[email protected]>
> Subject: [PATCH] ub: add sg_init_table for sense and read capacity commands
>
> Signed-off-by: FUJITA Tomonori <[email protected]>
> ---
> drivers/block/ub.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/block/ub.c b/drivers/block/ub.c
> index 5e740e1..08e909d 100644
> --- a/drivers/block/ub.c
> +++ b/drivers/block/ub.c
> @@ -1428,6 +1428,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
> scmd->state = UB_CMDST_INIT;
> scmd->nsg = 1;
> sg = &scmd->sgv[0];
> + sg_init_table(sg, UB_MAX_REQ_SG);
> sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
> (unsigned long)sc->top_sense & (PAGE_SIZE-1));
> scmd->len = UB_SENSE_SIZE;
> @@ -1863,6 +1864,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
> cmd->state = UB_CMDST_INIT;
> cmd->nsg = 1;
> sg = &cmd->sgv[0];
> + sg_init_table(sg, UB_MAX_REQ_SG);
> sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
> cmd->len = 8;
> cmd->lun = lun;
> --
> 1.5.2.4
>
Yep looks good, thanks Tomo!
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
