This patch removes two MTD drivers that have been marked as
BROKEN 17 months ago due to requiring nonexisting header files.
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/mtd/nand/Kconfig | 12
drivers/mtd/nand/Makefile | 2
drivers/mtd/nand/ppchameleonevb.c | 439 ------------------------------
drivers/mtd/nand/toto.c | 208 --------------
4 files changed, 661 deletions(-)
eb65564be12f427ae8a96a2ffa7e727a814e1129
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 246d451..fa6b8b5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -69,12 +69,6 @@ config MTD_NAND_AMS_DELTA
help
Support for NAND flash on Amstrad E3 (Delta).
-config MTD_NAND_TOTO
- tristate "NAND Flash device on TOTO board"
- depends on ARCH_OMAP && BROKEN
- help
- Support for NAND flash on Texas Instruments Toto platform.
-
config MTD_NAND_TS7250
tristate "NAND Flash device on TS-7250 board"
depends on MACH_TS72XX
@@ -120,12 +114,6 @@ config MTD_NAND_RTC_FROM4
This enables the driver for the Renesas Technology AG-AND
flash interface board (FROM_BOARD4)
-config MTD_NAND_PPCHAMELEONEVB
- tristate "NAND Flash device on PPChameleonEVB board"
- depends on PPCHAMELEONEVB && BROKEN
- help
- This enables the NAND flash driver on the PPChameleon EVB Board.
-
config MTD_NAND_S3C2410
tristate "NAND Flash support for S3C2410/S3C2440 SoC"
depends on ARCH_S3C2410
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 3ad6c01..f6b27de 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -9,12 +9,10 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
-obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
-obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
deleted file mode 100644
index 082073a..0000000
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- * drivers/mtd/nand/ppchameleonevb.c
- *
- * Copyright (C) 2003 DAVE Srl ([email protected])
- *
- * Derived from drivers/mtd/nand/edb7312.c
- *
- *
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash devices found on the
- * PPChameleon/PPChameleonEVB system.
- * PPChameleon options (autodetected):
- * - BA model: no NAND
- * - ME model: 32MB (Samsung K9F5608U0B)
- * - HI model: 128MB (Samsung K9F1G08UOM)
- * PPChameleonEVB options:
- * - 32MB (Samsung K9F5608U0B)
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <platforms/PPChameleonEVB.h>
-
-#undef USE_READY_BUSY_PIN
-#define USE_READY_BUSY_PIN
-/* see datasheets (tR) */
-#define NAND_BIG_DELAY_US 25
-#define NAND_SMALL_DELAY_US 10
-
-/* handy sizes */
-#define SZ_4M 0x00400000
-#define NAND_SMALL_SIZE 0x02000000
-#define NAND_MTD_NAME "ppchameleon-nand"
-#define NAND_EVB_MTD_NAME "ppchameleonevb-nand"
-
-/* GPIO pins used to drive NAND chip mounted on processor module */
-#define NAND_nCE_GPIO_PIN (0x80000000 >> 1)
-#define NAND_CLE_GPIO_PIN (0x80000000 >> 2)
-#define NAND_ALE_GPIO_PIN (0x80000000 >> 3)
-#define NAND_RB_GPIO_PIN (0x80000000 >> 4)
-/* GPIO pins used to drive NAND chip mounted on EVB */
-#define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14)
-#define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15)
-#define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16)
-#define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31)
-
-/*
- * MTD structure for PPChameleonEVB board
- */
-static struct mtd_info *ppchameleon_mtd = NULL;
-static struct mtd_info *ppchameleonevb_mtd = NULL;
-
-/*
- * Module stuff
- */
-static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
-static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
-
-#ifdef MODULE
-module_param(ppchameleon_fio_pbase, ulong, 0);
-module_param(ppchameleonevb_fio_pbase, ulong, 0);
-#else
-__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
-__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
-/*
- * Define static partitions for flash devices
- */
-static struct mtd_partition partition_info_hi[] = {
- { .name = "PPChameleon HI Nand Flash",
- .offset = 0,
- .size = 128 * 1024 * 1024
- }
-};
-
-static struct mtd_partition partition_info_me[] = {
- { .name = "PPChameleon ME Nand Flash",
- .offset = 0,
- .size = 32 * 1024 * 1024
- }
-};
-
-static struct mtd_partition partition_info_evb[] = {
- { .name = "PPChameleonEVB Nand Flash",
- .offset = 0,
- .size = 32 * 1024 * 1024
- }
-};
-
-#define NUM_PARTITIONS 1
-
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-#endif
-
-/*
- * hardware specific access to control-lines
- */
-static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
- switch (cmd) {
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
- break;
- }
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-#error Missing headerfiles. No way to fix this. -tglx
- switch (cmd) {
- case NAND_CTL_SETCLE:
- MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRCLE:
- MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETALE:
- MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRALE:
- MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_SETNCE:
- MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
- case NAND_CTL_CLRNCE:
- MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
- break;
- }
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-#ifdef USE_READY_BUSY_PIN
-/*
- * read device ready pin
- */
-static int ppchameleon_device_ready(struct mtd_info *minfo)
-{
- if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
- return 1;
- return 0;
-}
-
-static int ppchameleonevb_device_ready(struct mtd_info *minfo)
-{
- if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
- return 1;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Main initialization routine
- */
-static int __init ppchameleonevb_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem *ppchameleon_fio_base;
- void __iomem *ppchameleonevb_fio_base;
-
- /*********************************
- * Processor module NAND (if any) *
- *********************************/
- /* Allocate memory for MTD device structure and private data */
- ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ppchameleon_mtd) {
- printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
- if (!ppchameleon_fio_base) {
- printk("ioremap PPChameleon NAND flash failed\n");
- kfree(ppchameleon_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ppchameleon_mtd[1]);
-
- /* Initialize structures */
- memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ppchameleon_mtd->priv = this;
- ppchameleon_mtd->owner = THIS_MODULE;
-
- /* Initialize GPIOs */
- /* Pin mapping for NAND chip */
- /*
- CE GPIO_01
- CLE GPIO_02
- ALE GPIO_03
- R/B GPIO_04
- */
- /* output select */
- out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
- /* enable output driver */
- out_be32((volatile unsigned *)GPIO0_TCR,
- in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
- /* high-impedecence */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
- /* input select */
- out_be32((volatile unsigned *)GPIO0_ISR1H,
- (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
-#endif
-
- /* insert callbacks */
- this->IO_ADDR_R = ppchameleon_fio_base;
- this->IO_ADDR_W = ppchameleon_fio_base;
- this->cmd_ctrl = ppchameleon_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
- this->dev_ready = ppchameleon_device_ready;
-#endif
- this->chip_delay = NAND_BIG_DELAY_US;
- /* ECC mode */
- this->ecc.mode = NAND_ECC_SOFT;
-
- /* Scan to find existence of the device (it could not be mounted) */
- if (nand_scan(ppchameleon_mtd, 1)) {
- iounmap((void *)ppchameleon_fio_base);
- ppchameleon_fio_base = NULL;
- kfree(ppchameleon_mtd);
- goto nand_evb_init;
- }
-#ifndef USE_READY_BUSY_PIN
- /* Adjust delay if necessary */
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- this->chip_delay = NAND_SMALL_DELAY_US;
-#endif
-
-#ifdef CONFIG_MTD_PARTITIONS
- ppchameleon_mtd->name = "ppchameleon-nand";
- mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- mtd_parts = partition_info_me;
- else
- mtd_parts = partition_info_hi;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
-
- nand_evb_init:
- /****************************
- * EVB NAND (always present) *
- ****************************/
- /* Allocate memory for MTD device structure and private data */
- ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ppchameleonevb_mtd) {
- printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -ENOMEM;
- }
-
- /* map physical address */
- ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
- if (!ppchameleonevb_fio_base) {
- printk("ioremap PPChameleonEVB NAND flash failed\n");
- kfree(ppchameleonevb_mtd);
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
-
- /* Initialize structures */
- memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ppchameleonevb_mtd->priv = this;
-
- /* Initialize GPIOs */
- /* Pin mapping for NAND chip */
- /*
- CE GPIO_14
- CLE GPIO_15
- ALE GPIO_16
- R/B GPIO_31
- */
- /* output select */
- out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
- out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
- /* enable output driver */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
- NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
-#ifdef USE_READY_BUSY_PIN
- /* three-state select */
- out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
- /* high-impedecence */
- out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
- /* input select */
- out_be32((volatile unsigned *)GPIO0_ISR1L,
- (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
-#endif
-
- /* insert callbacks */
- this->IO_ADDR_R = ppchameleonevb_fio_base;
- this->IO_ADDR_W = ppchameleonevb_fio_base;
- this->cmd_ctrl = ppchameleonevb_hwcontrol;
-#ifdef USE_READY_BUSY_PIN
- this->dev_ready = ppchameleonevb_device_ready;
-#endif
- this->chip_delay = NAND_SMALL_DELAY_US;
-
- /* ECC mode */
- this->ecc.mode = NAND_ECC_SOFT;
-
- /* Scan to find existence of the device */
- if (nand_scan(ppchameleonevb_mtd, 1)) {
- iounmap((void *)ppchameleonevb_fio_base);
- kfree(ppchameleonevb_mtd);
- if (ppchameleon_fio_base)
- iounmap(ppchameleon_fio_base);
- return -ENXIO;
- }
-#ifdef CONFIG_MTD_PARTITIONS
- ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
- mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info_evb;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ppchameleonevb_init);
-
-/*
- * Clean up routine
- */
-static void __exit ppchameleonevb_cleanup(void)
-{
- struct nand_chip *this;
-
- /* Release resources, unregister device(s) */
- nand_release(ppchameleon_mtd);
- nand_release(ppchameleonevb_mtd);
-
- /* Release iomaps */
- this = (struct nand_chip *) &ppchameleon_mtd[1];
- iounmap((void *) this->IO_ADDR_R);
- this = (struct nand_chip *) &ppchameleonevb_mtd[1];
- iounmap((void *) this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree (ppchameleon_mtd);
- kfree (ppchameleonevb_mtd);
-}
-module_exit(ppchameleonevb_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("DAVE Srl <[email protected]>");
-MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
deleted file mode 100644
index f9e2d4a..0000000
--- a/drivers/mtd/nand/toto.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * drivers/mtd/nand/toto.c
- *
- * Copyright (c) 2003 Texas Instruments
- *
- * Derived from drivers/mtd/autcpu12.c
- *
- * Copyright (c) 2002 Thomas Gleixner <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/sizes.h>
-#include <asm/arch/toto.h>
-#include <asm/arch-omap1510/hardware.h>
-#include <asm/arch/gpio.h>
-
-#define CONFIG_NAND_WORKAROUND 1
-
-/*
- * MTD structure for TOTO board
- */
-static struct mtd_info *toto_mtd = NULL;
-
-static unsigned long toto_io_base = OMAP_FLASH_1_BASE;
-
-/*
- * Define partitions for flash devices
- */
-
-static struct mtd_partition partition_info64M[] = {
- { .name = "toto kernel partition 1",
- .offset = 0,
- .size = 2 * SZ_1M },
- { .name = "toto file sys partition 2",
- .offset = 2 * SZ_1M,
- .size = 14 * SZ_1M },
- { .name = "toto user partition 3",
- .offset = 16 * SZ_1M,
- .size = 16 * SZ_1M },
- { .name = "toto devboard extra partition 4",
- .offset = 32 * SZ_1M,
- .size = 32 * SZ_1M },
-};
-
-static struct mtd_partition partition_info32M[] = {
- { .name = "toto kernel partition 1",
- .offset = 0,
- .size = 2 * SZ_1M },
- { .name = "toto file sys partition 2",
- .offset = 2 * SZ_1M,
- .size = 14 * SZ_1M },
- { .name = "toto user partition 3",
- .offset = 16 * SZ_1M,
- .size = 16 * SZ_1M },
-};
-
-#define NUM_PARTITIONS32M 3
-#define NUM_PARTITIONS64M 4
-
-/*
- * hardware specific access to control-lines
- *
- * ctrl:
- * NAND_NCE: bit 0 -> bit 14 (0x4000)
- * NAND_CLE: bit 1 -> bit 12 (0x1000)
- * NAND_ALE: bit 2 -> bit 1 (0x0002)
- */
-static void toto_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned long bits;
-
- /* hopefully enough time for tc make proceding write to clear */
- udelay(1);
-
- bits = (~ctrl & NAND_NCE) << 14;
- bits |= (ctrl & NAND_CLE) << 12;
- bits |= (ctrl & NAND_ALE) >> 1;
-
-#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx
- gpiosetout(0x5002, bits);
-
-#ifdef CONFIG_NAND_WORKAROUND
- /* "some" dev boards busted, blue wired to rts2 :( */
- rts2setout(2, (ctrl & NAND_CLE) << 1);
-#endif
- /* allow time to ensure gpio state to over take memory write */
- udelay(1);
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * Main initialization routine
- */
-static int __init toto_init(void)
-{
- struct nand_chip *this;
- int err = 0;
-
- /* Allocate memory for MTD device structure and private data */
- toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!toto_mtd) {
- printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n");
- err = -ENOMEM;
- goto out;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&toto_mtd[1]);
-
- /* Initialize structures */
- memset(toto_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- toto_mtd->priv = this;
- toto_mtd->owner = THIS_MODULE;
-
- /* Set address of NAND IO lines */
- this->IO_ADDR_R = toto_io_base;
- this->IO_ADDR_W = toto_io_base;
- this->cmd_ctrl = toto_hwcontrol;
- this->dev_ready = NULL;
- /* 25 us command delay time */
- this->chip_delay = 30;
- this->ecc.mode = NAND_ECC_SOFT;
-
- /* Scan to find existance of the device */
- if (nand_scan(toto_mtd, 1)) {
- err = -ENXIO;
- goto out_mtd;
- }
-
- /* Register the partitions */
- switch (toto_mtd->size) {
- case SZ_64M:
- add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M);
- break;
- case SZ_32M:
- add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M);
- break;
- default:{
- printk(KERN_WARNING "Unsupported Nand device\n");
- err = -ENXIO;
- goto out_buf;
- }
- }
-
- gpioreserve(NAND_MASK); /* claim our gpios */
- archflashwp(0, 0); /* open up flash for writing */
-
- goto out;
-
- out_mtd:
- kfree(toto_mtd);
- out:
- return err;
-}
-
-module_init(toto_init);
-
-/*
- * Clean up routine
- */
-static void __exit toto_cleanup(void)
-{
- /* Release resources, unregister device */
- nand_release(toto_mtd);
-
- /* Free the MTD device structure */
- kfree(toto_mtd);
-
- /* stop flash writes */
- archflashwp(0, 1);
-
- /* release gpios to system */
- gpiorelease(NAND_MASK);
-}
-
-module_exit(toto_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Woodruff <[email protected]>");
-MODULE_DESCRIPTION("Glue layer for NAND flash on toto board");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
