Re: How to debug complete kernel lock-ups

[John Sigler <linux.kernel@free.fr>]

John Sigler wrote:

> I have an x86 system with two PCI slots, in which I inserted two
> specialized output cards (Dektec DTA-105).
>
> http://www.dektec.com/Products/DTA-105/
> (They provide an open source driver.)
>
> My problem is: when I write to the 4 ports (each card has 2 ports) "at 
> the same time" (not really "at the same time" because I have a 
> uni-processor system, so "within a short time frame" is more accurate) 
> the system *completely* locks up.
>
> The manufacturer told me they had seen the problem in their lab. I'm 
> just trying to provide some helpful debug output to speed up the process 
> of fixing the problem :-)
>
> I've built a debug 2.6.22.1-rt9 kernel, hoping to get the kernel to dump 
> something, anything.
>
> +CONFIG_KALLSYMS_ALL=y
> +CONFIG_PCI_DEBUG=y
> +CONFIG_DEBUG_DRIVER=y
> +CONFIG_PRINTK_TIME=y
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_KERNEL=y
> +CONFIG_DEBUG_SHIRQ=y
> +CONFIG_DETECT_SOFTLOCKUP=y
> +CONFIG_DEBUG_SLAB=y
> +CONFIG_DEBUG_SLAB_LEAK=y
> +CONFIG_DEBUG_PREEMPT=y
> +CONFIG_DEBUG_RT_MUTEXES=y
> +CONFIG_DEBUG_PI_LIST=y
> +CONFIG_RT_MUTEX_TESTER=y
> +CONFIG_DEBUG_SPINLOCK=y
> +CONFIG_DEBUG_MUTEXES=y
> +CONFIG_DEBUG_LOCK_ALLOC=y
> +CONFIG_PROVE_LOCKING=y
> +CONFIG_LOCKDEP=y
> +CONFIG_TRACE_IRQFLAGS=y
> +CONFIG_DEBUG_SPINLOCK_SLEEP=y
> +CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
> +CONFIG_STACKTRACE=y
> +CONFIG_PREEMPT_TRACE=y
> +CONFIG_DEBUG_BUGVERBOSE=y
> +CONFIG_DEBUG_INFO=y
> +CONFIG_FRAME_POINTER=y
> +CONFIG_FORCED_INLINING=y
> +CONFIG_DEBUG_STACKOVERFLOW=y
> +CONFIG_DEBUG_RODATA=y
> +CONFIG_4KSTACKS=y
>
> I've enabled the serial console, and used SysRq to bump the console 
> level to 9 (I want everything, even KERN_DEBUG output).
>
> I've enabled the IO-APIC watchdog (nmi_watchdog=1).
>
> Once the system locks up, I get no output, no panic, no oops.
> The serial console is frozen, my ssh sessions are frozen.
>
> Suppose the PCI bus "crashes" (whatever that means) or locks up.
> Would that make the system completely unresponsive? The I/O does have to 
> get to/from the south bridge, through the PCI bus AFAIU. I can imagine 
> that a locked PCI bus would be slightly problematic.
>
> Does this mean I need some kind of PCI bus analyzer (i.e. hardware) at 
> this point? Is there anything more I can try?

I've tested with a vanilla 2.6.22.10 kernel (no PREEMPT_RT patch).
That system also locks up and remains completely unresponsive (I can't 
open new ssh sessions, the system won't answer ICMP echo requests).

How do driver writers deal with complete kernel hangs?

Regards.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/