Hi Bart,
Thanks for assistance.
On Friday 19 October 2007 21:28:43 Bartlomiej Zolnierkiewicz wrote:
> > No help anyone? Did I buy a taboo drive?
> >
> > nick@linuxamd:nick$ /usr/sbin/hdparm -i /dev/hdd
> >
> > /dev/hdd:
> >
> > Model=TSSTcorp CDDVDW SH-S202J, FwRev=SB00, SerialNo=
> > Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
> > RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
> > BuffType=unknown, BuffSize=0kB, MaxMultSect=0
> > (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
> > IORDY=yes, tPIO={min:383,w/IORDY:120}, tDMA={min:120,rec:120}
> > PIO modes: pio0 pio1 pio2 pio3 pio4
> > DMA modes: mdma0 mdma1 mdma2
> > UDMA modes: udma0 udma1 *udma2 udma3 udma4
> > AdvancedPM=no
> > Drive conforms to: unknown:
> >
> > * signifies the current active mode
> >
> >
> > Any help to get this fixed (by me) would be welcome. I cannot find any
> > information on why this happens (or rather why the 'drive side') refuses
> > to see 80-wire ide cable.
>
> Please try:
>
> http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm
>1/broken-out/ide-ide-change-master-slave-identify-order.patch
No change:
ide_setup: hdd=ide-cd
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hdd: TSSTcorp CDDVDW SH-S202J, ATAPI CD/DVD-ROM drive
hdd: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdd: selected mode 0x42
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Nick
--
Free Software Foundation Associate Member 5508
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
