At Thu, 18 Oct 2007 16:21:59 +0200,
Maxim Levitsky wrote:
>
> On Thursday 18 October 2007 07:57:27 Takashi Iwai wrote:
> > At Thu, 18 Oct 2007 03:53:08 +0200,
> > Maxim Levitsky wrote:
> > >
> > > From 0824b077b75c19253b45c5a455775c331acd54ee Mon Sep 17 00:00:00 2001
> > > From: Maxim Levitsky <[email protected]>
> > > Date: Thu, 18 Oct 2007 03:35:37 +0200
> > > Subject: [PATCH] [HDA] [STAC] Since there is now a master volume control,
> > > don't call the headphone output "Master", it isn't strictly correct anyway
> >
> > I thought stac925x has no volume knob, so "Master" should be still
> > applied for this codec?
>
> Yes, you are right, but stac925x has only one DAC, and thus if it is
> connected to any line-out, it will be
> 'Front', but if it is connected to 'headphones' only, then why not
> to call it 'Headphone'
The point is that apps usually require a "Master" volume. If it's the
single volume control, it's better to call it master for convenience.
> STAC 9200 has no volumeknob too, but it is handled seperartly
Yes, 9200 doesn't call stac92xx_auto_create_hp_ctls(), so it's not
affected.
> STAC 9202 and 9250 has no volumeknob too, but as I said they have
> just one DAC again
Both are handled as patch_stac925x. That's what I meant. With your
patch, there will be no master any more.
So, how about the patch below?
Takashi
diff -r fb9512ce24e0 pci/hda/patch_sigmatel.c
--- a/pci/hda/patch_sigmatel.c Thu Oct 18 10:48:43 2007 +0200
+++ b/pci/hda/patch_sigmatel.c Thu Oct 18 16:36:35 2007 +0200
@@ -111,6 +111,7 @@ struct sigmatel_spec {
unsigned int alt_switch: 1;
unsigned int hp_detect: 1;
unsigned int gpio_mute: 1;
+ unsigned int no_vol_knob :1;
unsigned int gpio_mask, gpio_data;
@@ -1930,7 +1931,8 @@ static int stac92xx_auto_create_hp_ctls(
}
if (spec->multiout.hp_nid) {
const char *pfx;
- if (old_num_dacs == spec->multiout.num_dacs)
+ if (old_num_dacs == spec->multiout.num_dacs &&
+ spec->no_vol_knob)
pfx = "Master";
else
pfx = "Headphone";
@@ -2487,6 +2489,7 @@ static int patch_stac9200(struct hda_cod
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
spec->pin_nids = stac9200_pin_nids;
+ spec->no_vol_knob = 1;
spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
stac9200_models,
stac9200_cfg_tbl);
@@ -2541,6 +2544,7 @@ static int patch_stac925x(struct hda_cod
codec->spec = spec;
spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
spec->pin_nids = stac925x_pin_nids;
+ spec->no_vol_knob = 1;
spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
stac925x_models,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]