Hi:
Just a couple more things...
* Darrick J. Wong <[email protected]> [2007-10-16 16:06:57 -0700]:
> New driver to read FB-DIMM temperature sensors on systems with the
> Intel 5000 series chipsets.
>
> Signed-off-by: Darrick J. Wong <[email protected]>
> ---
>
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1
> drivers/hwmon/i5k_amb.c | 548 +++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 3
> 4 files changed, 562 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index b8854b9..c2acb37 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -215,6 +215,16 @@ config SENSORS_DS1621
> This driver can also be built as a module. If so, the module
> will be called ds1621.
>
> +config SENSORS_I5K_AMB
> + tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
> + depends on PCI && EXPERIMENTAL
> + help
> + If you say yes here you get support for FB-DIMM AMB temperature
> + monitoring chips on systems with the Intel 5000 series chipset.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i5k_amb.
> +
> config SENSORS_F71805F
> tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
> depends on EXPERIMENTAL
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 2f592e2..914c48c 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
> obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
> obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
> obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
> +obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
> obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
> obj-$(CONFIG_SENSORS_IT87) += it87.o
> obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
> diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
> new file mode 100644
> index 0000000..3bde717
> --- /dev/null
> +++ b/drivers/hwmon/i5k_amb.c
> @@ -0,0 +1,548 @@
> +/*
> + * A hwmon driver for the Intel 5000 series chipset FB-DIMM AMB
> + * temperature sensors
> + * Copyright (C) 2007 IBM
> + *
> + * Author: Darrick J. Wong <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/jiffies.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +#include <linux/delay.h>
> +#include <linux/log2.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +#define DRVNAME "i5k_amb"
> +
> +#define I5K_REG_AMB_BASE_ADDR 0x48
> +#define I5K_REG_AMB_LEN_ADDR 0x50
> +#define I5K_REG_CHAN0_PRESENCE_ADDR 0x64
> +#define I5K_REG_CHAN1_PRESENCE_ADDR 0x66
> +
> +#define AMB_REG_TEMP_MIN_ADDR 0x80
> +#define AMB_REG_TEMP_MID_ADDR 0x81
> +#define AMB_REG_TEMP_MAX_ADDR 0x82
> +#define AMB_REG_TEMP_STATUS_ADDR 0x84
> +#define AMB_REG_TEMP_ADDR 0x85
> +
> +#define AMB_CONFIG_SIZE 2048
> +#define AMB_FUNC_3_OFFSET 768
> +
> +#define AMB_REG_TEMP_STATUS(amb) ((amb) * AMB_CONFIG_SIZE + \
> + AMB_FUNC_3_OFFSET + AMB_REG_TEMP_STATUS_ADDR)
> +#define AMB_REG_TEMP_MIN(amb) ((amb) * AMB_CONFIG_SIZE + \
> + AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MIN_ADDR)
> +#define AMB_REG_TEMP_MID(amb) ((amb) * AMB_CONFIG_SIZE + \
> + AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MID_ADDR)
> +#define AMB_REG_TEMP_MAX(amb) ((amb) * AMB_CONFIG_SIZE + \
> + AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MAX_ADDR)
> +#define AMB_REG_TEMP(amb) ((amb) * AMB_CONFIG_SIZE + \
> + AMB_FUNC_3_OFFSET + AMB_REG_TEMP_ADDR)
> +
> +#define MAX_MEM_CHANNELS 4
> +#define MAX_AMBS_PER_CHANNEL 16
> +#define MAX_AMBS (MAX_MEM_CHANNELS * \
> + MAX_AMBS_PER_CHANNEL)
> +/*
> + * Ugly hack: For some reason the highest bit is set if there
> + * are _any_ DIMMs in the channel. Attempting to read from
> + * this "high-order" AMB results in a memory bus error, so
> + * for now we'll just ignore that top bit, even though that
> + * might prevent us from seeing the 16th DIMM in the channel.
> + */
> +#define REAL_MAX_AMBS_PER_CHANNEL 15
> +#define KNOBS_PER_AMB 5
> +
> +#define AMB_NUM_FROM_REG(byte_num, bit_num) ((byte_num) * \
> + MAX_AMBS_PER_CHANNEL) + (bit_num)
> +
> +#define AMB_SYSFS_NAME_LEN 16
> +struct i5k_device_attribute {
> + struct sensor_device_attribute s_attr;
> + char name[AMB_SYSFS_NAME_LEN];
> +};
> +
> +struct i5k_amb_data {
> + struct device *hwmon_dev;
> + struct resource *resource;
This member is unused.
> +
> + unsigned long amb_base;
> + unsigned long amb_len;
> + u16 amb_present[MAX_MEM_CHANNELS];
> + void __iomem *amb_mmio;
> + struct i5k_device_attribute *attrs;
> + unsigned int num_attrs;
> +};
> +
> +static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
> + char *buf)
> +{
> + return sprintf(buf, "%s\n", DRVNAME);
> +}
> +
> +
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +
> +static struct platform_device *amb_pdev;
> +
> +static u8 amb_read_byte(struct i5k_amb_data *data, unsigned long offset)
> +{
> + return ioread8(data->amb_mmio + offset);
> +}
> +
> +static void amb_write_byte(struct i5k_amb_data *data, unsigned long offset,
> + u8 val)
> +{
> + iowrite8(val, data->amb_mmio + offset);
> +}
> +
> +static ssize_t show_amb_alarm(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> +
> + if (!(amb_read_byte(data, AMB_REG_TEMP_STATUS(attr->index)) & 0x20) &&
> + (amb_read_byte(data, AMB_REG_TEMP_STATUS(attr->index)) & 0x8))
> + return sprintf(buf, "1\n");
> + else
> + return sprintf(buf, "0\n");
> +}
> +
> +static ssize_t store_amb_min(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf,
> + size_t count)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
> +
> + if (temp > 255)
> + temp = 255;
> +
> + amb_write_byte(data, AMB_REG_TEMP_MIN(attr->index), temp);
> + return count;
> +}
> +
> +static ssize_t store_amb_mid(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf,
> + size_t count)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
> +
> + if (temp > 255)
> + temp = 255;
> +
> + amb_write_byte(data, AMB_REG_TEMP_MID(attr->index), temp);
> + return count;
> +}
> +
> +static ssize_t store_amb_max(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf,
> + size_t count)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
> +
> + if (temp > 255)
> + temp = 255;
> +
> + amb_write_byte(data, AMB_REG_TEMP_MAX(attr->index), temp);
> + return count;
> +}
> +
> +static ssize_t show_amb_min(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n",
> + 500 * amb_read_byte(data, AMB_REG_TEMP_MIN(attr->index)));
> +}
> +
> +static ssize_t show_amb_mid(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n",
> + 500 * amb_read_byte(data, AMB_REG_TEMP_MID(attr->index)));
> +}
> +
> +static ssize_t show_amb_max(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n",
> + 500 * amb_read_byte(data, AMB_REG_TEMP_MAX(attr->index)));
> +}
> +
> +static ssize_t show_amb_temp(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct i5k_amb_data *data = dev_get_drvdata(dev);
> + return sprintf(buf, "%d\n",
> + 500 * amb_read_byte(data, AMB_REG_TEMP(attr->index)));
> +}
> +
> +static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
> +{
> + int i, j, k, d = 0;
> + u16 c;
> + int res = 0;
> + int num_ambs = 0;
> + struct i5k_amb_data *data = platform_get_drvdata(pdev);
> +
> + /* Count the number of AMBs found */
> + for (i = 0; i < MAX_MEM_CHANNELS; i++) {
> + c = data->amb_present[i];
> + for (j = 0; j < REAL_MAX_AMBS_PER_CHANNEL; j++) {
> + if (c & 0x1)
> + num_ambs++;
> + c >>= 1;
> + }
You're counting set bits the hard way.
/* ignore the high-order bit, see "Ugly hack" comment above */
num_ambs += hweight16(data->amb_present[i] & 0x7fff);
> + }
> +
> + /* Set up sysfs stuff */
> + data->attrs = kzalloc(sizeof(*data->attrs) * num_ambs * KNOBS_PER_AMB,
> + GFP_KERNEL);
> + if (!data->attrs)
> + return -ENOMEM;
> + data->num_attrs = 0;
> +
> + for (i = 0; i < MAX_MEM_CHANNELS; i++) {
> + c = data->amb_present[i];
> + for (j = 0; j < REAL_MAX_AMBS_PER_CHANNEL; j++, c >>= 1) {
You could use ffs() here, but whatever, it's fine that way too.
> + struct i5k_device_attribute *iattr;
> +
> + k = AMB_NUM_FROM_REG(i, j);
> + if (!(c & 0x1))
> + continue;
> + d++;
> +
> + /* Temperature sysfs knob */
> + iattr = data->attrs + data->num_attrs;
> + snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
> + "temp%d_input", d);
Much better, thanks.
> + iattr->s_attr.dev_attr.attr.name = iattr->name;
> + iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
> + iattr->s_attr.dev_attr.show = show_amb_temp;
> + iattr->s_attr.index = k;
> + res = device_create_file(&pdev->dev,
> + &iattr->s_attr.dev_attr);
> + if (res)
> + goto exit_remove;
> + data->num_attrs++;
> +
> + /* Temperature min sysfs knob */
> + iattr = data->attrs + data->num_attrs;
> + snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
> + "temp%d_min", d);
> + iattr->s_attr.dev_attr.attr.name = iattr->name;
> + iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
> + iattr->s_attr.dev_attr.show = show_amb_min;
> + iattr->s_attr.dev_attr.store = store_amb_min;
> + iattr->s_attr.index = k;
> + res = device_create_file(&pdev->dev,
> + &iattr->s_attr.dev_attr);
> + if (res)
> + goto exit_remove;
> + data->num_attrs++;
> +
> + /* Temperature mid sysfs knob */
> + iattr = data->attrs + data->num_attrs;
> + snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
> + "temp%d_mid", d);
> + iattr->s_attr.dev_attr.attr.name = iattr->name;
> + iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
> + iattr->s_attr.dev_attr.show = show_amb_mid;
> + iattr->s_attr.dev_attr.store = store_amb_mid;
> + iattr->s_attr.index = k;
> + res = device_create_file(&pdev->dev,
> + &iattr->s_attr.dev_attr);
> + if (res)
> + goto exit_remove;
> + data->num_attrs++;
> +
> + /* Temperature max sysfs knob */
> + iattr = data->attrs + data->num_attrs;
> + snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
> + "temp%d_max", d);
> + iattr->s_attr.dev_attr.attr.name = iattr->name;
> + iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
> + iattr->s_attr.dev_attr.show = show_amb_max;
> + iattr->s_attr.dev_attr.store = store_amb_max;
> + iattr->s_attr.index = k;
> + res = device_create_file(&pdev->dev,
> + &iattr->s_attr.dev_attr);
> + if (res)
> + goto exit_remove;
> + data->num_attrs++;
> +
> + /* Temperature alarm sysfs knob */
> + iattr = data->attrs + data->num_attrs;
> + snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
> + "temp%d_alarm", d);
> + iattr->s_attr.dev_attr.attr.name = iattr->name;
> + iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
> + iattr->s_attr.dev_attr.show = show_amb_alarm;
> + iattr->s_attr.index = k;
> + res = device_create_file(&pdev->dev,
> + &iattr->s_attr.dev_attr);
> + if (res)
> + goto exit_remove;
> + data->num_attrs++;
> + }
> + }
> +
> + res = device_create_file(&pdev->dev, &dev_attr_name);
> + if (res)
> + goto exit_remove;
> +
> + data->hwmon_dev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(data->hwmon_dev)) {
> + res = PTR_ERR(data->hwmon_dev);
> + goto exit_remove;
> + }
> +
> + return res;
> +
> +exit_remove:
> + device_remove_file(&pdev->dev, &dev_attr_name);
> + for (i = 0; i < data->num_attrs; i++)
> + device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr);
> + kfree(data->attrs);
> +
> + return res;
> +}
> +
> +static int __devinit i5k_amb_add(void)
> +{
> + int res = -ENODEV;
> +
> + /* only ever going to be one of these */
> + amb_pdev = platform_device_alloc(DRVNAME, 0);
> + if (!amb_pdev)
> + return -ENOMEM;
> +
> + res = platform_device_add(amb_pdev);
> + if (res)
> + goto err;
> + return 0;
> +
> +err:
> + platform_device_put(amb_pdev);
> + return res;
> +}
> +
> +static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
> +{
> + struct pci_dev *pcidev;
> + u32 val32;
> + int res = -ENODEV;
> +
> + /* Find AMB register memory space */
> + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
> + PCI_DEVICE_ID_INTEL_5000_ERR,
> + NULL);
> + if (!pcidev)
> + return -ENODEV;
> +
> + if (pci_read_config_dword(pcidev, I5K_REG_AMB_BASE_ADDR, &val32))
> + goto out;
> + data->amb_base = val32;
> +
> + if (pci_read_config_dword(pcidev, I5K_REG_AMB_LEN_ADDR, &val32))
> + goto out;
> + data->amb_len = val32;
> +
> + /* Is it big enough? */
> + if (data->amb_len < AMB_CONFIG_SIZE * MAX_AMBS) {
> + printk(KERN_ERR DRVNAME "AMB region too small!\n");
> + goto out;
> + }
> +
> + res = 0;
> +out:
> + pci_dev_put(pcidev);
> + return res;
> +}
> +
> +static int __devinit i5k_channel_probe(struct i5k_amb_data *data, int which)
> +{
> + struct pci_dev *pcidev;
> + unsigned long dev_id;
> + u16 val16;
> + int res = -ENODEV;
> +
> + /* Two memory channels per FBD PCI device */
> + switch (which) {
> + case 0:
> + dev_id = PCI_DEVICE_ID_INTEL_5000_FBD0;
> + break;
> + case 1:
> + dev_id = PCI_DEVICE_ID_INTEL_5000_FBD1;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
Awkward: see suggested patch at the bottom of this message.
> + /* Copy the DIMM presence map for these two channels */
> + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
> + if (!pcidev)
> + return -ENODEV;
> +
> + if (pci_read_config_word(pcidev, I5K_REG_CHAN0_PRESENCE_ADDR, &val16))
> + goto out;
> + data->amb_present[which * 2] = val16;
> +
> + if (pci_read_config_word(pcidev, I5K_REG_CHAN1_PRESENCE_ADDR, &val16))
> + goto out;
> + data->amb_present[which * 2 + 1] = val16;
> +
> + res = 0;
> +
> +out:
> + pci_dev_put(pcidev);
> + return res;
> +}
> +
> +static int __devinit i5k_amb_probe(struct platform_device *pdev)
> +{
> + struct i5k_amb_data *data;
> + struct resource *reso;
> + int res = -ENODEV;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + /* Figure out where the AMB registers live */
> + res = i5k_find_amb_registers(data);
> + if (res)
> + goto err;
> +
> + /* Copy the DIMM presence map for the first two channels */
> + res = i5k_channel_probe(data, 0);
> + if (res)
> + goto err;
> +
> + /* Copy the DIMM presence map for the optional second two channels */
> + i5k_channel_probe(data, 1);
> +
> + /* Set up resource regions */
> + reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
> + if (!reso) {
> + res = -EBUSY;
> + goto err;
> + }
> +
> + data->amb_mmio = ioremap_nocache(data->amb_base, data->amb_len);
> + if (!data->amb_mmio) {
> + res = -EBUSY;
> + goto err_map_failed;
> + }
> +
> + platform_set_drvdata(pdev, data);
> +
> + res = i5k_amb_hwmon_init(pdev);
> + if (res)
> + goto err_init_failed;
> +
> + return res;
> +
> +err_init_failed:
> + iounmap(data->amb_mmio);
> + platform_set_drvdata(pdev, NULL);
> +err_map_failed:
> + release_mem_region(data->amb_base, data->amb_len);
> +err:
> + kfree(data);
> + return res;
> +}
> +
> +static int __devexit i5k_amb_remove(struct platform_device *pdev)
> +{
> + int i;
> + struct i5k_amb_data *data = platform_get_drvdata(pdev);
> +
> + hwmon_device_unregister(data->hwmon_dev);
> + device_remove_file(&pdev->dev, &dev_attr_name);
> + for (i = 0; i < data->num_attrs; i++)
> + device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr);
> + kfree(data->attrs);
> + iounmap(data->amb_mmio);
> + release_mem_region(data->amb_base, data->amb_len);
> + platform_set_drvdata(pdev, NULL);
> + kfree(data);
> + return 0;
> +}
> +
> +static struct platform_driver i5k_amb_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = DRVNAME,
> + },
> + .probe = i5k_amb_probe,
> + .remove = __devexit_p(i5k_amb_remove),
> +};
> +
> +static int __init i5k_amb_init(void)
> +{
> + int res;
> +
> + res = platform_driver_register(&i5k_amb_driver);
> + if (res)
> + return res;
> +
> + res = i5k_amb_add();
> + if (res)
> + platform_driver_unregister(&i5k_amb_driver);
> +
> + return res;
> +}
> +
> +static void __exit i5k_amb_exit(void)
> +{
> + platform_device_unregister(amb_pdev);
> + platform_driver_unregister(&i5k_amb_driver);
> +}
> +
> +MODULE_AUTHOR("Darrick J. Wong <[email protected]>");
> +MODULE_DESCRIPTION("Intel 5000 chipset FB-DIMM AMB temperature sensor");
> +MODULE_LICENSE("GPL");
> +
> +module_init(i5k_amb_init);
> +module_exit(i5k_amb_exit);
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 55f307f..d641b2f 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2241,6 +2241,9 @@
> #define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
> #define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
> #define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
> +#define PCI_DEVICE_ID_INTEL_5000_ERR 0x25F0
> +#define PCI_DEVICE_ID_INTEL_5000_FBD0 0x25F5
> +#define PCI_DEVICE_ID_INTEL_5000_FBD1 0x25F6
> #define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
> #define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
> #define PCI_DEVICE_ID_INTEL_3000_HB 0x2778
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 3bde717..65ecc56 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -400,25 +400,12 @@ out:
return res;
}
-static int __devinit i5k_channel_probe(struct i5k_amb_data *data, int which)
+static int __devinit i5k_channel_probe(u16 *amb_present, unsigned long dev_id)
{
struct pci_dev *pcidev;
- unsigned long dev_id;
u16 val16;
int res = -ENODEV;
- /* Two memory channels per FBD PCI device */
- switch (which) {
- case 0:
- dev_id = PCI_DEVICE_ID_INTEL_5000_FBD0;
- break;
- case 1:
- dev_id = PCI_DEVICE_ID_INTEL_5000_FBD1;
- break;
- default:
- return -EINVAL;
- }
-
/* Copy the DIMM presence map for these two channels */
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
if (!pcidev)
@@ -426,11 +413,11 @@ static int __devinit i5k_channel_probe(struct i5k_amb_data *data, int which)
if (pci_read_config_word(pcidev, I5K_REG_CHAN0_PRESENCE_ADDR, &val16))
goto out;
- data->amb_present[which * 2] = val16;
+ amb_present[0] = val16;
if (pci_read_config_word(pcidev, I5K_REG_CHAN1_PRESENCE_ADDR, &val16))
goto out;
- data->amb_present[which * 2 + 1] = val16;
+ amb_present[1] = val16;
res = 0;
@@ -455,12 +442,14 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev)
goto err;
/* Copy the DIMM presence map for the first two channels */
- res = i5k_channel_probe(data, 0);
+ res = i5k_channel_probe(&data->amb_present[0],
+ PCI_DEVICE_ID_INTEL_5000_FBD0);
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
- i5k_channel_probe(data, 1);
+ i5k_channel_probe(&data->amb_present[2],
+ PCI_DEVICE_ID_INTEL_5000_FBD1);
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
Thanks & regards,
--
Mark M. Hoffman
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
