Re: Inquiry data and emulated SG devices

[Jeff Garzik <jeff@garzik.org>]

Mathieu Fluhr wrote:
> On Wed, 2007-10-17 at 21:31 -0400, Jeff Garzik wrote:
> > Robert Hancock wrote:
> > > This doesn't seem a very reliable way to identify an IDE device, as all
> > > that 0 means is that the device does not claim conformance to any
> > > standard. I would think it would be legitimate for an IDE device to put
> > > a value like 5 in there as well, if it complies with SPC-4..
> > Via the this-doesnt-really-matter-but-it-should-be-noted department:
> >
> > According to the latest on t10.org, MMC retroactively permitted SCSI 
> > version to be zero, for MMC-compliant USB and ATAPI devices.
>
> Quoting to the latest MtFuji draft (Section 17.7.1):
>  "The ANSI Version field shall contain a non-zero value to comply with 
>   this version of the Specification for a SCSI logical unit or zero for
>   an ATAPI logical unit."
>
>
> > > In the case of libata though, that appears to be due to this code in
> > > drivers/ata/libata-scsi.c:
> > >
> > >     /* ATAPI devices typically report zero for their SCSI version,
> > >      * and sometimes deviate from the spec WRT response data
> > >      * format.  If SCSI version is reported as zero like normal,
> > >      * then we make the following fixups:  1) Fake MMC-5 version,
> > >      * to indicate to the Linux scsi midlayer this is a modern
> > >      * device.  2) Ensure response data format / ATAPI information
> > >      * are always correct.
> > >      */
> > >             if (buf[2] == 0) {
> > >                 buf[2] = 0x5;
> > >                 buf[3] = 0x32;
> > >             }
>
> This explain a lot... But (Sorry I am not a scsi mid-layer expert) why
> faking what the device outputs?

The SCSI midlayer makes a lot of "if scsi version <= 2" choices.  In the 
case of ATAPI, we do not want to force ATAPI down the path of ancient 
SCSI devices, as this disables some MMC features that modern ATAPI 
devices support.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/