On Fri, Oct 12, 2007 at 01:46:33PM -0700, Kok, Auke wrote:
> I would assume that that is true for all PHY's - if there is no link to keep the
> carrier active on I would think that the power consumption is nominal across the
> board. Once the PHY detects link pulses it should obviously use different power
> levels to negotiate the link for each speed.
>
> PHY autonegotiation just works the same across the board - the PHY's send out
> little pulses (iow nominal power consumption) to detect a link partner, and only
> when one is found do they engage in more aggressive conversation to establish
> capabilities across the link.
Too bad not much can be done about fibre ports, but then again you can't
even change speeds on those. Then again those are not on laptops or
other low power devices in the first place.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
