Re: Syba 8-Port Serial Card Unidentified By Kernel

[Chris Bergeron <chris@pcburn.com>]

Andrey Panin wrote:
> On 284, 10 11, 2007 at 01:02:12PM -0400, Chris Bergeron wrote:
>   
> > Andrey Panin wrote:
> >     
> > > On 278, 10 05, 2007 at 05:31:05PM -0400, Chris Bergeron wrote:
> > >   
> > >       
> > > > Hello all,
> > > >
> > > > I've just installed a multiport serial card released by an outfit called 
> > > > Syba.  This is an 8 port serial-only card with an Octopus style breakout 
> > > > cable.  The main chipset on it is an ITE IT8871F.
> > > >     
> > > >         
> > > Are you sure ? IIRC IT887x are PCI-ISA bridges with additional periphery
> > > and your lspci shows PLX chip. Can you send complete lspci -vv output ?
> > > Output of dmesg could be useful too.
> > >
> > >       
> > I'm sure that's what it says on the largest chip on the PCI card.  It could 
> > be that the other two chips are more relevant... the numbers from them are 
> > included below.
> >
> > I've posted up a quick text only page with the diagnostic information from 
> > the system (full dmesg, lspci, etc) plus links to pictures of the board 
> > (since others might see something important that I'm not aware of).  You 
> > can access that at 
> > http://pcburn.com/files/Syba_serial_controller/index.html
> >     
>
> Can you try an attached patch ? I hope it should at least detect UARTs on 
> your board. Be ready that baudrate could be wrong, because we do not know
> what frequency is used to clock these UARTs.
>
>   
Alright,finally had another machine to try the attached patch.  I get an 
odd error regarding IRQ 17:

"irq 17: nobody cared (try booting with the "irqpoll" option)"

along with a long error message (but the kernel continues to load).  
Aside from that the ports now allow me to run a getty on them and the 
DTR line lights up on my serial tester (as it does with a working port) 
but the device on the other end doesn't function.

I've updated the web page with lspci -vv and dmesg output.  I can also 
post it here if that's desirable, just figured I'd save everyone the 
inbox flooding :).

-- Chris

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/