Re: PCIe Hotplug: NFG unless I boot with card already inserted.

Kristen Carlson Accardi wrote:


Hi Mark,
So, just to make sure I understand, your reproducer for the failing case is:
1.  Boot laptop with no card.
2.  Load pciehp


Note that at this point I can insert/remove cards and they work fine.
If I suspend with card inserted, then lspci still shows the card on resume
but pciehp no longer functions (doesn't notice insert/removal events).

3.  Suspend laptop (slot is still empty)
4.  Resume laptop (slot is still empty)
5.  insert card - card is not detected.


Correct.  Then rmmod pciehp; modprobe pciehp;  and it works again.

Another thing:  if a card is already in the slot before pciehp is loaded
(under any circumstances), then pciehp does *not* see the card until I
unplug/replug it.

I also checked my modprobe.d/ options, and I am using pciehp_force=1.
Without that flag, none of this ever works.

Can you tell me which Dell laptop you have, and also send me the dmesg
output of the failing case after loading pciehp with pciehp_debug=1.


I'm attaching a syslog capture (if you just want the kernel stuff,
then just do:  grep 'kernel|logger' syslog.txt

Also attached is a full  lspci -vv  for this machine,
which happens to be a Dell Inspiron 9400 with 2.1GHz Core2Duo
and 2GB of RAM.

Cheers

Oct 16 14:19:16 corey syslogd 1.4.1#20ubuntu4: restart.
Oct 16 14:19:16 corey dhclient: bound to 10.0.0.6 -- renewal in 33709 seconds.
Oct 16 14:19:16 corey kernel: Inspecting /boot/System.map-2.6.23.1
Oct 16 14:19:16 corey kernel: Loaded 24564 symbols from /boot/System.map-2.6.23.1.
Oct 16 14:19:16 corey kernel: Symbols match kernel version 2.6.23.
Oct 16 14:19:16 corey kernel: No module symbols loaded - kernel modules not enabled. 
Oct 16 14:19:16 corey kernel: Linux version 2.6.23.1 (root@corey) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 SMP PREEMPT Sun Oct 14 16:48:27 EDT 2007
Oct 16 14:19:16 corey kernel: BIOS-provided physical RAM map:
Oct 16 14:19:16 corey kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Oct 16 14:19:16 corey kernel:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Oct 16 14:19:16 corey kernel: 1150MB HIGHMEM available.
Oct 16 14:19:16 corey kernel: 896MB LOWMEM available.
Oct 16 14:19:16 corey kernel: Entering add_active_range(0, 0, 523987) 0 entries of 256 used
Oct 16 14:19:16 corey kernel: Zone PFN ranges:
Oct 16 14:19:16 corey kernel:   DMA             0 ->     4096
Oct 16 14:19:16 corey kernel:   Normal       4096 ->   229376
Oct 16 14:19:16 corey kernel:   HighMem    229376 ->   523987
Oct 16 14:19:16 corey kernel: Movable zone start PFN for each node
Oct 16 14:19:16 corey kernel: early_node_map[1] active PFN ranges
Oct 16 14:19:16 corey kernel:     0:        0 ->   523987
Oct 16 14:19:16 corey kernel: On node 0 totalpages: 523987
Oct 16 14:19:16 corey kernel:   DMA zone: 32 pages used for memmap
Oct 16 14:19:16 corey kernel:   DMA zone: 0 pages reserved
Oct 16 14:19:16 corey kernel:   DMA zone: 4064 pages, LIFO batch:0
Oct 16 14:19:16 corey kernel:   Normal zone: 1760 pages used for memmap
Oct 16 14:19:16 corey kernel:   Normal zone: 223520 pages, LIFO batch:31
Oct 16 14:19:16 corey kernel:   HighMem zone: 2301 pages used for memmap
Oct 16 14:19:16 corey kernel:   HighMem zone: 292310 pages, LIFO batch:31
Oct 16 14:19:16 corey kernel:   Movable zone: 0 pages used for memmap
Oct 16 14:19:16 corey kernel: DMI 2.4 present.
Oct 16 14:19:16 corey kernel: ACPI: RSDP 000FC1B0, 0014 (r0 DELL  )
Oct 16 14:19:16 corey kernel: ACPI: RSDT 7FED39CD, 0040 (r1 DELL    M07     27D7061B ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: FACP 7FED4800, 0074 (r1 DELL    M07     27D7061B ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: DSDT 7FED5400, 4841 (r1 INT430 SYSFexxx     1001 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: FACS 7FEE3C00, 0040
Oct 16 14:19:16 corey kernel: ACPI: HPET 7FED4F00, 0038 (r1 DELL    M07            1 ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: APIC 7FED5000, 0068 (r1 DELL    M07     27D7061B ASL        47)
Oct 16 14:19:16 corey kernel: ACPI: MCFG 7FED4FC0, 003E (r16 DELL    M07     27D7061B ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: SLIC 7FED509C, 0176 (r1 DELL    M07     27D7061B ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: BOOT 7FED4BC0, 0028 (r1 DELL    M07     27D7061B ASL        61)
Oct 16 14:19:16 corey kernel: ACPI: SSDT 7FED3A0D, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: PM-Timer IO Port: 0x1008
Oct 16 14:19:16 corey kernel: ACPI: Local APIC address 0xfee00000
Oct 16 14:19:16 corey kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 16 14:19:16 corey kernel: Processor #0 6:15 APIC version 20
Oct 16 14:19:16 corey kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 16 14:19:16 corey kernel: Processor #1 6:15 APIC version 20
Oct 16 14:19:16 corey kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 16 14:19:16 corey kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 16 14:19:16 corey kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 16 14:19:16 corey kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 16 14:19:16 corey kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 16 14:19:16 corey kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 16 14:19:16 corey kernel: ACPI: IRQ0 used by override.
Oct 16 14:19:16 corey kernel: ACPI: IRQ2 used by override.
Oct 16 14:19:16 corey kernel: ACPI: IRQ9 used by override.
Oct 16 14:19:16 corey kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 16 14:19:16 corey kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Oct 16 14:19:16 corey kernel: Using ACPI (MADT) for SMP configuration information
Oct 16 14:19:16 corey kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Oct 16 14:19:16 corey kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Oct 16 14:19:16 corey kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
Oct 16 14:19:16 corey kernel: Built 1 zonelists in Zone order.  Total pages: 519894
Oct 16 14:19:16 corey kernel: Kernel command line: root=/dev/sda1 ro resume=/dev/sda3 vga=ext
Oct 16 14:19:16 corey kernel: mapped APIC to ffffb000 (fee00000)
Oct 16 14:19:16 corey kernel: mapped IOAPIC to ffffa000 (fec00000)
Oct 16 14:19:16 corey kernel: Enabling fast FPU save and restore... done.
Oct 16 14:19:16 corey kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 16 14:19:16 corey kernel: Initializing CPU#0
Oct 16 14:19:16 corey kernel: CPU 0 irqstacks, hard=c0375000 soft=c0373000
Oct 16 14:19:16 corey kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 16 14:19:16 corey kernel: Detected 2161.357 MHz processor.
Oct 16 14:19:16 corey syslogd: /dev/console: Resource temporarily unavailable
Oct 16 14:19:16 corey kernel: Console: colour VGA+ 80x50
Oct 16 14:19:16 corey kernel: console [tty0] enabled
Oct 16 14:19:16 corey kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 16 14:19:16 corey kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 16 14:19:16 corey kernel: Memory: 2074644k/2095948k available (1618k kernel code, 20180k reserved, 673k data, 184k init, 1178444k highmem)
Oct 16 14:19:16 corey kernel: virtual kernel memory layout:
Oct 16 14:19:16 corey kernel:     fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
Oct 16 14:19:16 corey kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 16 14:19:16 corey kernel:     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Oct 16 14:19:16 corey kernel:     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Oct 16 14:19:16 corey kernel:       .init : 0xc0342000 - 0xc0370000   ( 184 kB)
Oct 16 14:19:16 corey kernel:       .data : 0xc0294b7a - 0xc033d180   ( 673 kB)
Oct 16 14:19:16 corey kernel:       .text : 0xc0100000 - 0xc0294b7a   (1618 kB)
Oct 16 14:19:16 corey kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 16 14:19:16 corey kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Oct 16 14:19:16 corey kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Oct 16 14:19:16 corey kernel: hpet0: 3 64-bit timers, 14318180 Hz
Oct 16 14:19:16 corey kernel: Calibrating delay using timer specific routine.. 4327.32 BogoMIPS (lpj=7210119)
Oct 16 14:19:16 corey kernel: Mount-cache hash table entries: 512
Oct 16 14:19:16 corey kernel: CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
Oct 16 14:19:16 corey kernel: monitor/mwait feature present.
Oct 16 14:19:16 corey kernel: using mwait in idle threads.
Oct 16 14:19:16 corey kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 16 14:19:16 corey kernel: CPU: L2 cache: 4096K
Oct 16 14:19:16 corey kernel: CPU: Physical Processor ID: 0
Oct 16 14:19:16 corey kernel: CPU: Processor Core ID: 0
Oct 16 14:19:16 corey kernel: CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Oct 16 14:19:16 corey kernel: Compat vDSO mapped to ffffe000.
Oct 16 14:19:16 corey kernel: Checking 'hlt' instruction... OK.
Oct 16 14:19:16 corey kernel: SMP alternatives: switching to UP code
Oct 16 14:19:16 corey kernel: ACPI: Core revision 20070126
Oct 16 14:19:16 corey kernel: CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
Oct 16 14:19:16 corey kernel: SMP alternatives: switching to SMP code
Oct 16 14:19:16 corey kernel: Booting processor 1/1 eip 3000
Oct 16 14:19:16 corey kernel: CPU 1 irqstacks, hard=c0376000 soft=c0374000
Oct 16 14:19:16 corey kernel: Initializing CPU#1
Oct 16 14:19:16 corey kernel: Calibrating delay using timer specific routine.. 4324.64 BogoMIPS (lpj=7204227)
Oct 16 14:19:16 corey kernel: CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
Oct 16 14:19:16 corey kernel: monitor/mwait feature present.
Oct 16 14:19:16 corey kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 16 14:19:16 corey kernel: CPU: L2 cache: 4096K
Oct 16 14:19:16 corey kernel: CPU: Physical Processor ID: 0
Oct 16 14:19:16 corey kernel: CPU: Processor Core ID: 1
Oct 16 14:19:16 corey kernel: CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Oct 16 14:19:16 corey kernel: CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
Oct 16 14:19:16 corey kernel: Total of 2 processors activated (8652.96 BogoMIPS).
Oct 16 14:19:16 corey kernel: ENABLING IO-APIC IRQs
Oct 16 14:19:16 corey kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 16 14:19:16 corey kernel: checking TSC synchronization [CPU#0 -> CPU#1]:
Oct 16 14:19:16 corey kernel: Measured 4037161492 cycles TSC warp between CPUs, turning off TSC clock.
Oct 16 14:19:16 corey kernel: Marking TSC unstable due to: check_tsc_sync_source failed.
Oct 16 14:19:16 corey kernel: Brought up 2 CPUs
Oct 16 14:19:16 corey kernel: NET: Registered protocol family 16
Oct 16 14:19:16 corey kernel: ACPI: bus type pci registered
Oct 16 14:19:16 corey kernel: PCI: Using MMCONFIG
Oct 16 14:19:16 corey kernel: Setting up standard PCI resources
Oct 16 14:19:16 corey kernel: ACPI: EC: Look up EC in DSDT
Oct 16 14:19:16 corey kernel: ACPI: Interpreter enabled
Oct 16 14:19:16 corey kernel: ACPI: (supports S0 S3 S4 S5)
Oct 16 14:19:16 corey kernel: ACPI: Using IOAPIC for interrupt routing
Oct 16 14:19:16 corey kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 16 14:19:16 corey kernel: PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Oct 16 14:19:16 corey kernel: PCI quirk: region 1080-10bf claimed by ICH6 GPIO
Oct 16 14:19:16 corey kernel: PCI: Transparent bridge - 0000:00:1e.0
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
Oct 16 14:19:16 corey kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 16 14:19:16 corey kernel: pnp: PnP ACPI init
Oct 16 14:19:16 corey kernel: ACPI: bus type pnp registered
Oct 16 14:19:16 corey kernel: pnp: PnP ACPI: found 12 devices
Oct 16 14:19:16 corey kernel: ACPI: ACPI bus type pnp unregistered
Oct 16 14:19:16 corey kernel: SCSI subsystem initialized
Oct 16 14:19:16 corey kernel: libata version 2.21 loaded.
Oct 16 14:19:16 corey kernel: PCI: Using ACPI for IRQ routing
Oct 16 14:19:16 corey kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Oct 16 14:19:16 corey kernel: ACPI: RTC can wake from S4
Oct 16 14:19:16 corey kernel: Time: hpet clocksource has been installed.
Oct 16 14:19:16 corey kernel: Switched to high resolution mode on CPU 0
Oct 16 14:19:16 corey kernel: Switched to high resolution mode on CPU 1
Oct 16 14:19:16 corey kernel: pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:02: ioport range 0x1008-0x100f has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0x1060-0x107f has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
Oct 16 14:19:16 corey kernel: pnp: 00:08: ioport range 0x910-0x91f has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:08: ioport range 0x920-0x92f has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:08: ioport range 0x930-0x97f has been reserved
Oct 16 14:19:16 corey kernel: pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
Oct 16 14:19:16 corey kernel: PCI: Bridge: 0000:00:01.0
Oct 16 14:19:16 corey kernel:   IO window: e000-efff
Oct 16 14:19:16 corey kernel:   MEM window: efd00000-efefffff
Oct 16 14:19:16 corey kernel:   PREFETCH window: d0000000-dfffffff
Oct 16 14:19:16 corey kernel: PCI: Bridge: 0000:00:1c.0
Oct 16 14:19:16 corey kernel:   IO window: disabled.
Oct 16 14:19:16 corey kernel:   MEM window: disabled.
Oct 16 14:19:16 corey kernel:   PREFETCH window: disabled.
Oct 16 14:19:16 corey kernel: PCI: Bridge: 0000:00:1c.1
Oct 16 14:19:16 corey kernel:   IO window: disabled.
Oct 16 14:19:16 corey kernel:   MEM window: efc00000-efcfffff
Oct 16 14:19:16 corey kernel:   PREFETCH window: disabled.
Oct 16 14:19:16 corey kernel: PCI: Bridge: 0000:00:1c.3
Oct 16 14:19:16 corey kernel:   IO window: d000-dfff
Oct 16 14:19:16 corey kernel:   MEM window: efa00000-efbfffff
Oct 16 14:19:16 corey kernel:   PREFETCH window: e0000000-e01fffff
Oct 16 14:19:16 corey kernel: PCI: Bridge: 0000:00:1e.0
Oct 16 14:19:16 corey kernel:   IO window: disabled.
Oct 16 14:19:16 corey kernel:   MEM window: ef900000-ef9fffff
Oct 16 14:19:16 corey kernel:   PREFETCH window: disabled.
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.3 to 64
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Oct 16 14:19:16 corey kernel: NET: Registered protocol family 2
Oct 16 14:19:16 corey kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 16 14:19:16 corey kernel: TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Oct 16 14:19:16 corey kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Oct 16 14:19:16 corey kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 16 14:19:16 corey kernel: TCP reno registered
Oct 16 14:19:16 corey kernel: Simple Boot Flag at 0x79 set to 0x1
Oct 16 14:19:16 corey kernel: highmem bounce pool size: 64 pages
Oct 16 14:19:16 corey kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 16 14:19:16 corey kernel: io scheduler noop registered
Oct 16 14:19:16 corey kernel: io scheduler anticipatory registered
Oct 16 14:19:16 corey kernel: io scheduler cfq registered (default)
Oct 16 14:19:16 corey kernel: Boot video device is 0000:01:00.0
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 16 14:19:16 corey kernel: assign_interrupt_mode Found MSI capability
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:01.0:pcie00]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:01.0:pcie03]
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Oct 16 14:19:16 corey kernel: assign_interrupt_mode Found MSI capability
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.0:pcie00]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.0:pcie02]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.0:pcie03]
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Oct 16 14:19:16 corey kernel: assign_interrupt_mode Found MSI capability
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.1:pcie00]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.1:pcie02]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.1:pcie03]
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1c.3 to 64
Oct 16 14:19:16 corey kernel: assign_interrupt_mode Found MSI capability
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.3:pcie00]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.3:pcie02]
Oct 16 14:19:16 corey kernel: Allocate Port Service[0000:00:1c.3:pcie03]
Oct 16 14:19:16 corey kernel: hpet_resources: 0xfed00000 is busy
Oct 16 14:19:16 corey kernel: Generic RTC Driver v1.07
Oct 16 14:19:16 corey kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Oct 16 14:19:16 corey kernel: RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
Oct 16 14:19:16 corey kernel: ata_piix 0000:00:1f.2: version 2.12
Oct 16 14:19:16 corey kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 16 14:19:16 corey kernel: scsi0 : ata_piix
Oct 16 14:19:16 corey kernel: scsi1 : ata_piix
Oct 16 14:19:16 corey kernel: ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
Oct 16 14:19:16 corey kernel: ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
Oct 16 14:19:16 corey kernel: ata1.00: ATA-7: ST9160823AS, 3.AAB, max UDMA/133
Oct 16 14:19:16 corey kernel: ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
Oct 16 14:19:16 corey kernel: ata1.00: configured for UDMA/133
Oct 16 14:19:16 corey kernel: ata2.00: ATAPI: SONY DVD RW DW-Q58A, UYS2, max UDMA/33
Oct 16 14:19:16 corey kernel: ata2.00: configured for UDMA/33
Oct 16 14:19:16 corey kernel: scsi 0:0:0:0: Direct-Access     ATA      ST9160823AS      3.AA PQ: 0 ANSI: 5
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 16 14:19:16 corey kernel:  sda: sda1 sda2 sda3
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Oct 16 14:19:16 corey kernel: scsi 1:0:0:0: CD-ROM            SONY     DVD RW DW-Q58A   UYS2 PQ: 0 ANSI: 5
Oct 16 14:19:16 corey kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 16 14:19:16 corey kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 16 14:19:16 corey kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 16 14:19:16 corey kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Oct 16 14:19:16 corey kernel: rtc0: alarms up to one month, y3k
Oct 16 14:19:16 corey kernel: TCP cubic registered
Oct 16 14:19:16 corey kernel: Using IPI No-Shortcut mode
Oct 16 14:19:16 corey kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Oct 16 14:19:16 corey kernel: rtc_cmos 00:06: setting the system clock to 2007-10-16 18:19:00 (1192558740)
Oct 16 14:19:16 corey kernel: kjournald starting.  Commit interval 5 seconds
Oct 16 14:19:16 corey kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 16 14:19:16 corey kernel: VFS: Mounted root (ext3 filesystem) readonly.
Oct 16 14:19:16 corey kernel: Freeing unused kernel memory: 184k freed
Oct 16 14:19:16 corey kernel: NET: Registered protocol family 1
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver usbfs
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver hub
Oct 16 14:19:16 corey kernel: usbcore: registered new device driver usb
Oct 16 14:19:16 corey kernel: USB Universal Host Controller Interface driver v3.0
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
Oct 16 14:19:16 corey kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 1-0:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 1-0:1.0: 2 ports detected
Oct 16 14:19:16 corey kernel: Linux agpgart interface v0.102
Oct 16 14:19:16 corey kernel: ACPI: SSDT 7FED4134, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: SSDT 7FED3EE9, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Oct 16 14:19:16 corey kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 16 14:19:16 corey kernel: ACPI: SSDT 7FED4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: SSDT 7FED40AF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
Oct 16 14:19:16 corey kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Oct 16 14:19:16 corey kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
Oct 16 14:19:16 corey kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 2-0:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 2-0:1.0: 2 ports detected
Oct 16 14:19:16 corey kernel: ACPI: AC Adapter [AC] (on-line)
Oct 16 14:19:16 corey kernel: input: Lid Switch as /class/input/input1
Oct 16 14:19:16 corey kernel: ACPI: Lid Switch [LID]
Oct 16 14:19:16 corey kernel: input: Power Button (CM) as /class/input/input2
Oct 16 14:19:16 corey kernel: ACPI: Power Button (CM) [PBTN]
Oct 16 14:19:16 corey kernel: input: Sleep Button (CM) as /class/input/input3
Oct 16 14:19:16 corey kernel: ACPI: Sleep Button (CM) [SBTN]
Oct 16 14:19:16 corey kernel: intel_rng: FWH not detected
Oct 16 14:19:16 corey kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 16 14:19:16 corey kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 16 14:19:16 corey kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Oct 16 14:19:16 corey kernel: Uniform CD-ROM driver Revision: 3.20
Oct 16 14:19:16 corey kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 16 14:19:16 corey kernel: ACPI: Battery Slot [BAT0] (battery present)
Oct 16 14:19:16 corey kernel: input: PC Speaker as /class/input/input4
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
Oct 16 14:19:16 corey kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 3-0:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 3-0:1.0: 2 ports detected
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Oct 16 14:19:16 corey kernel: uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
Oct 16 14:19:16 corey kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 4-0:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 4-0:1.0: 2 ports detected
Oct 16 14:19:16 corey kernel: sdhci: Secure Digital Host Controller Interface driver
Oct 16 14:19:16 corey kernel: sdhci: Copyright(c) Pierre Ossman
Oct 16 14:19:16 corey kernel: ACPI: Thermal Zone [THM] (52 C)
Oct 16 14:19:16 corey kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Oct 16 14:19:16 corey kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 16 14:19:16 corey kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Oct 16 14:19:16 corey kernel: ehci_hcd 0000:00:1d.7: debug port 1
Oct 16 14:19:16 corey kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Oct 16 14:19:16 corey kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
Oct 16 14:19:16 corey kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 16 14:19:16 corey kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 5-0:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 5-0:1.0: 8 ports detected
Oct 16 14:19:16 corey kernel: Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
Oct 16 14:19:16 corey kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input5
Oct 16 14:19:16 corey kernel: mice: PS/2 mouse device common for all mice
Oct 16 14:19:16 corey kernel: b44.c:v1.01 (Jun 16, 2006)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Oct 16 14:19:16 corey kernel: eth0: Broadcom 4400 10/100BaseT Ethernet 00:18:8b:a7:bf:42
Oct 16 14:19:16 corey kernel: sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
Oct 16 14:19:16 corey kernel: mmc0: SDHCI at 0xef9fd400 irq 23 DMA
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
Oct 16 14:19:16 corey kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64
Oct 16 14:19:16 corey kernel: ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
Oct 16 14:19:16 corey kernel: firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
Oct 16 14:19:16 corey kernel: usb 5-1: new high speed USB device using ehci_hcd and address 2
Oct 16 14:19:16 corey kernel: firewire_sbp2: Unknown parameter `serialize_io'
Oct 16 14:19:16 corey kernel: fuse init (API version 7.8)
Oct 16 14:19:16 corey kernel: usb 5-1: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 5-1:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 5-1:1.0: 4 ports detected
Oct 16 14:19:16 corey kernel: firewire_core: created new fw device fw0 (0 config rom retries, S400)
Oct 16 14:19:16 corey kernel: usb 5-7: new high speed USB device using ehci_hcd and address 3
Oct 16 14:19:16 corey kernel: usb 5-7: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: hub 5-7:1.0: USB hub found
Oct 16 14:19:16 corey kernel: hub 5-7:1.0: 4 ports detected
Oct 16 14:19:16 corey kernel: usb 5-7.2: new full speed USB device using ehci_hcd and address 4
Oct 16 14:19:16 corey kernel: usb 5-7.2: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: NET: Registered protocol family 17
Oct 16 14:19:16 corey kernel: usb 5-7.3: new low speed USB device using ehci_hcd and address 5
Oct 16 14:19:16 corey kernel: usb 5-7.3: configuration #1 chosen from 1 choice
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver usbserial
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver usbserial_generic
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver visor
Oct 16 14:19:16 corey kernel: drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
Oct 16 14:19:16 corey kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Oct 16 14:19:16 corey kernel: pl2303 5-7.2:1.0: pl2303 converter detected
Oct 16 14:19:16 corey kernel: usb 5-7.2: pl2303 converter now attached to ttyUSB0
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver pl2303
Oct 16 14:19:16 corey kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver hiddev
Oct 16 14:19:16 corey kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 16 14:19:16 corey kernel: input: Logitech Optical USB Mouse as /class/input/input6
Oct 16 14:19:16 corey kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-7.3
Oct 16 14:19:16 corey kernel: usbcore: registered new interface driver usbhid
Oct 16 14:19:16 corey kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

Oct 16 14:19:16 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 10a0e0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:19:16 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: request_irq 16 for hpc0 (returns 0)
Oct 16 14:19:16 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:0:10
Oct 16 14:19:16 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.0
Oct 16 14:19:16 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=0, irq=10
Oct 16 14:19:16 corey kernel: pciehp: get_power_status - physical_slot = 0011_0002
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_attention_status - physical_slot = 0011_0002
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_latch_status - physical_slot = 0011_0002
Oct 16 14:19:16 corey kernel: pciehp: get_adapter_status - physical_slot = 0011_0002
Oct 16 14:19:16 corey kernel: pciehp: Registering bus=b dev=0 hp_slot=0 sun=2 slot_device_offset=0
Oct 16 14:19:16 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d2
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 18a0e0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 40
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:19:16 corey kernel: pciehp: pci resource[8] start=0xefc00000(len=0x100000)
Oct 16 14:19:16 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: request_irq 17 for hpc1 (returns 0)
Oct 16 14:19:16 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:1:11
Oct 16 14:19:16 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.1
Oct 16 14:19:16 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=1, irq=11
Oct 16 14:19:16 corey kernel: pciehp: get_power_status - physical_slot = 0012_0003
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_attention_status - physical_slot = 0012_0003
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_latch_status - physical_slot = 0012_0003
Oct 16 14:19:16 corey kernel: pciehp: get_adapter_status - physical_slot = 0012_0003
Oct 16 14:19:16 corey kernel: pciehp: Registering bus=c dev=0 hp_slot=0 sun=3 slot_device_offset=0
Oct 16 14:19:16 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d6
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 28a0e0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:19:16 corey kernel: pciehp: pci resource[7] start=0xd000(len=0x1000)
Oct 16 14:19:16 corey kernel: pciehp: pci resource[8] start=0xefa00000(len=0x200000)
Oct 16 14:19:16 corey kernel: pciehp: pci resource[9] start=0xe0000000(len=0x200000)
Oct 16 14:19:16 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:19:16 corey kernel: pciehp: pcie_init: request_irq 18 for hpc2 (returns 0)
Oct 16 14:19:16 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:3:12
Oct 16 14:19:16 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.3
Oct 16 14:19:16 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=3, irq=12
Oct 16 14:19:16 corey kernel: pciehp: get_power_status - physical_slot = 0013_0005
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_attention_status - physical_slot = 0013_0005
Oct 16 14:19:16 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:19:16 corey kernel: pciehp: get_latch_status - physical_slot = 0013_0005
Oct 16 14:19:16 corey kernel: pciehp: get_adapter_status - physical_slot = 0013_0005
Oct 16 14:19:16 corey kernel: pciehp: Registering bus=d dev=0 hp_slot=0 sun=5 slot_device_offset=0
Oct 16 14:19:16 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
Oct 16 14:19:16 corey kernel: pciehp: pcie_port_service_register = 0
Oct 16 14:19:16 corey kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4

Oct 16 14:19:16 corey kernel: Adding 2064344k swap on /dev/sda3.  Priority:-1 extents:1 across:2064344k
Oct 16 14:19:16 corey kernel: EXT3 FS on sda1, internal journal
Oct 16 14:19:16 corey kernel: kjournald starting.  Commit interval 5 seconds
Oct 16 14:19:16 corey kernel: EXT3 FS on sda2, internal journal
Oct 16 14:19:16 corey kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 16 14:19:16 corey kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Oct 16 14:19:16 corey kernel: b44: eth0: Flow control is off for TX and off for RX.
Oct 16 14:19:16 corey kernel: IA-32 Microcode Update Driver: v1.14a <[email protected]>
Oct 16 14:19:16 corey dhcdbd: Started up.
Oct 16 14:19:17 corey atieventsd[3533]: ATI External Events Daemon started... 
Oct 16 14:19:17 corey atieventsd[3533]: Event daemon control socket created 
Oct 16 14:19:17 corey atieventsd[3533]: acpid connection established 
Oct 16 14:19:18 corey kernel: Installing knfsd (copyright (C) 1996 [email protected]).
Oct 16 14:19:18 corey kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Oct 16 14:19:18 corey kernel: NFSD: starting 90-second grace period
Oct 16 14:19:18 corey sshd[3698]: Server listening on 0.0.0.0 port 22.
Oct 16 14:19:18 corey rpc.statd[3750]: Version 1.0.11 Starting
Oct 16 14:19:19 corey ntpd[3781]: ntpd [email protected] Wed Mar  7 20:43:30 UTC 2007 (1)
Oct 16 14:19:19 corey ntpd[3782]: precision = 1.000 usec
Oct 16 14:19:19 corey ntpd[3782]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Oct 16 14:19:19 corey ntpd[3782]: Listening on interface lo, 127.0.0.1#123 Enabled
Oct 16 14:19:19 corey ntpd[3782]: Listening on interface eth0, 10.0.0.6#123 Enabled
Oct 16 14:19:19 corey ntpd[3782]: kernel time sync status 0040
Oct 16 14:19:19 corey ntpd[3782]: frequency initialized 137.839 PPM from /var/lib/ntp/ntp.drift
Oct 16 14:19:19 corey hcid[3803]: Bluetooth HCI daemon
Oct 16 14:19:19 corey kernel: Bluetooth: Core ver 2.11
Oct 16 14:19:19 corey kernel: NET: Registered protocol family 31
Oct 16 14:19:19 corey kernel: Bluetooth: HCI device and connection manager initialized
Oct 16 14:19:19 corey kernel: Bluetooth: HCI socket layer initialized
Oct 16 14:19:19 corey hcid[3803]: Starting SDP server
Oct 16 14:19:19 corey kernel: Bluetooth: L2CAP ver 2.8
Oct 16 14:19:19 corey kernel: Bluetooth: L2CAP socket layer initialized
Oct 16 14:19:19 corey kernel: Bluetooth: RFCOMM socket layer initialized
Oct 16 14:19:19 corey kernel: Bluetooth: RFCOMM TTY layer initialized
Oct 16 14:19:19 corey kernel: Bluetooth: RFCOMM ver 1.8
Oct 16 14:19:19 corey anacron[3850]: Anacron 2.3 started on 2007-10-16
Oct 16 14:19:19 corey anacron[3850]: Normal exit (0 jobs run)
Oct 16 14:19:19 corey /usr/sbin/cron[3881]: (CRON) INFO (pidfile fd = 3)
Oct 16 14:19:19 corey /usr/sbin/cron[3882]: (CRON) STARTUP (fork ok)
Oct 16 14:19:19 corey /usr/sbin/cron[3882]: (CRON) INFO (Running @reboot jobs)
Oct 16 14:19:20 corey kernel: vmmon: module license 'unspecified' taints kernel.
Oct 16 14:19:20 corey kernel: /dev/vmmon[3920]: VMCI: Driver initialized.
Oct 16 14:19:20 corey kernel: /dev/vmmon[3920]: Module vmmon: registered with major=10 minor=165
Oct 16 14:19:20 corey kernel: /dev/vmmon[3920]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Oct 16 14:19:20 corey kernel: /dev/vmmon[3920]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Oct 16 14:19:20 corey kernel: /dev/vmmon[3920]: Module vmmon: initialized
Oct 16 14:19:21 corey kernel: /dev/vmnet: open called by PID 3965 (vmnet-bridge)
Oct 16 14:19:21 corey kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
Oct 16 14:19:21 corey kernel: /dev/vmnet: port on hub 0 successfully opened
Oct 16 14:19:21 corey kernel: bridge-eth0: enabling the bridge
Oct 16 14:19:21 corey kernel: bridge-eth0: up
Oct 16 14:19:21 corey kernel: bridge-eth0: already up
Oct 16 14:19:21 corey kernel: bridge-eth0: attached
Oct 16 14:19:21 corey vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0
Oct 16 14:19:21 corey vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Oct 16 14:19:21 corey vmnet-dhcpd: All rights reserved.
Oct 16 14:19:21 corey vmnet-dhcpd: 
Oct 16 14:19:21 corey vmnet-dhcpd: Please contribute if you find this software useful.
Oct 16 14:19:21 corey vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Oct 16 14:19:21 corey vmnet-dhcpd: 
Oct 16 14:19:21 corey vmnet-dhcpd: Configured subnet: 192.168.99.0
Oct 16 14:19:21 corey vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.99.254
Oct 16 14:19:21 corey vmnet-dhcpd: Recving on     VNet/vmnet1/192.168.99.0
Oct 16 14:19:21 corey vmnet-dhcpd: Sending on     VNet/vmnet1/192.168.99.0
Oct 16 14:19:21 corey kernel: /dev/vmnet: open called by PID 3981 (vmnet-dhcpd)
Oct 16 14:19:21 corey kernel: /dev/vmnet: hub 1 does not exist, allocating memory.
Oct 16 14:19:21 corey kernel: /dev/vmnet: port on hub 1 successfully opened
Oct 16 14:19:21 corey vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0
Oct 16 14:19:21 corey vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Oct 16 14:19:21 corey vmnet-dhcpd: All rights reserved.
Oct 16 14:19:21 corey vmnet-dhcpd: 
Oct 16 14:19:21 corey vmnet-dhcpd: Please contribute if you find this software useful.
Oct 16 14:19:21 corey vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Oct 16 14:19:21 corey vmnet-dhcpd: 
Oct 16 14:19:21 corey vmnet-detect[3971]: NetDetectDaemonInit: No host policy file found. Not initializing filter. 
Oct 16 14:19:21 corey vmnet-detect[3971]: Unable to initialize the daemon 
Oct 16 14:19:21 corey vmnet-dhcpd: Configured subnet: 192.168.239.0
Oct 16 14:19:21 corey vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.239.254
Oct 16 14:19:21 corey vmnet-dhcpd: Recving on     VNet/vmnet8/192.168.239.0
Oct 16 14:19:21 corey vmnet-dhcpd: Sending on     VNet/vmnet8/192.168.239.0
Oct 16 14:19:21 corey kernel: /dev/vmnet: open called by PID 3992 (vmnet-dhcpd)
Oct 16 14:19:21 corey kernel: /dev/vmnet: hub 8 does not exist, allocating memory.
Oct 16 14:19:21 corey kernel: /dev/vmnet: port on hub 8 successfully opened
Oct 16 14:19:21 corey kernel: /dev/vmnet: open called by PID 3997 (vmnet-natd)
Oct 16 14:19:21 corey kernel: /dev/vmnet: port on hub 8 successfully opened
Oct 16 14:19:30 corey kdm_greet[4100]: Can't open default user face
Oct 16 14:19:31 corey kernel: /dev/vmnet: open called by PID 4103 (vmnet-netifup)
Oct 16 14:19:31 corey kernel: /dev/vmnet: port on hub 1 successfully opened
Oct 16 14:19:31 corey kernel: /dev/vmnet: open called by PID 4114 (vmnet-netifup)
Oct 16 14:19:31 corey kernel: /dev/vmnet: port on hub 8 successfully opened
Oct 16 14:19:37 corey kdm_greet[4100]: Internal error: memory corruption detected
Oct 16 14:19:37 corey kdm: :0[4084]: (pam_unix) session opened for user root by (uid=0)
Oct 16 14:19:57 corey hcid[3803]: Default passkey agent (:1.6, /org/bluez/passkey_agent_4285) registered
Oct 16 14:23:39 corey ntpd[3782]: synchronized to 10.0.0.2, stratum 3
Oct 16 14:23:39 corey ntpd[3782]: time reset -0.240395 s
Oct 16 14:23:39 corey ntpd[3782]: kernel time sync enabled 0001
Oct 16 14:26:38 corey logger: /usr/local/bin/suspend.sh 
Oct 16 14:26:52 corey kernel: Stopping tasks ... done.
Oct 16 14:26:52 corey kernel: Suspending console(s)
Oct 16 14:26:52 corey kernel: pl2303 5-7.2:1.0: no suspend for driver pl2303?
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Stopping disk

Oct 16 14:26:52 corey kernel: pciehp_suspend ENTRY
Oct 16 14:26:52 corey last message repeated 2 times

Oct 16 14:26:52 corey kernel: ACPI handle has no context!
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:03:01.1 disabled
Oct 16 14:26:52 corey kernel: ACPI handle has no context!
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1f.2 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1d.7 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1d.3 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1d.2 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1d.1 disabled
Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled

Oct 16 14:26:52 corey kernel: pciehp_suspend ENTRY
Oct 16 14:26:52 corey last message repeated 2 times

Oct 16 14:26:52 corey kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Oct 16 14:26:52 corey kernel: Disabling non-boot CPUs ...
Oct 16 14:26:52 corey kernel: CPU 1 is now offline
Oct 16 14:26:52 corey kernel: SMP alternatives: switching to UP code
Oct 16 14:26:52 corey kernel: CPU1 is down
Oct 16 14:26:52 corey kernel: Back to C!
Oct 16 14:26:52 corey kernel: Enabling non-boot CPUs ...
Oct 16 14:26:52 corey kernel: SMP alternatives: switching to SMP code
Oct 16 14:26:52 corey kernel: Booting processor 1/1 eip 3000
Oct 16 14:26:52 corey kernel: CPU 1 irqstacks, hard=c0376000 soft=c0374000
Oct 16 14:26:52 corey kernel: Initializing CPU#1
Oct 16 14:26:52 corey kernel: Calibrating delay using timer specific routine.. 4324.31 BogoMIPS (lpj=7205309)
Oct 16 14:26:52 corey kernel: CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
Oct 16 14:26:52 corey kernel: monitor/mwait feature present.
Oct 16 14:26:52 corey kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 16 14:26:52 corey kernel: CPU: L2 cache: 4096K
Oct 16 14:26:52 corey kernel: CPU: Physical Processor ID: 0
Oct 16 14:26:52 corey kernel: CPU: Processor Core ID: 1
Oct 16 14:26:52 corey kernel: CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Oct 16 14:26:52 corey kernel: CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
Oct 16 14:26:52 corey kernel: CPU1 is up
Oct 16 14:26:52 corey kernel: Switched to high resolution mode on CPU 1
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010)
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10b)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was ffa7c004, writing efffc004)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64

Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 20100)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing 200000f0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing b0b00)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Oct 16 14:26:52 corey kernel: pciehp_resume ENTRY

Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 20200)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing efc0efc0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 6 (was 0, writing c0c00)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100107)
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Oct 16 14:26:52 corey kernel: pciehp_resume ENTRY

Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset f (was 400, writing 20400)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e011e001)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing efb0efa0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 0, writing d0d0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing e0d00)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100007)
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1c.3 to 64
Oct 16 14:26:52 corey kernel: pciehp_resume ENTRY

Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Oct 16 14:26:52 corey kernel: usb usb1: root hub lost power or was reset
Oct 16 14:26:52 corey kernel: PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
Oct 16 14:26:52 corey kernel: usb usb2: root hub lost power or was reset
Oct 16 14:26:52 corey kernel: PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 309)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
Oct 16 14:26:52 corey kernel: usb usb3: root hub lost power or was reset
Oct 16 14:26:52 corey kernel: PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 407)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
Oct 16 14:26:52 corey kernel: usb usb4: root hub lost power or was reset
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 100f1, writing 1fff1)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 90, writing ef90ef90)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 228000f0)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107)
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 205)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
Oct 16 14:26:52 corey kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 205)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 104)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 10)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:0c:00.0 at offset f (was 100, writing 105)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:0c:00.0 at offset 4 (was 0, writing efcff000)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:0c:00.0 at offset 3 (was 0, writing 10)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100000, writing 100106)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 105)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing ef9fe000)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.0 at offset f (was 4020100, writing 4020103)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing ef9fd800)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 800000, writing 804000)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 2100000, writing 2100106)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.1 at offset f (was 200, writing 209)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing ef9fd400)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
Oct 16 14:26:52 corey kernel: ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.2 at offset f (was 200, writing 209)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing ef9fd500)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.3 at offset f (was 200, writing 209)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.3 at offset 4 (was 0, writing ef9fd600)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.3 at offset 1 (was 2100000, writing 2100102)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.4 at offset f (was 200, writing 209)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing ef9fd700)
Oct 16 14:26:52 corey kernel: PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100000, writing 2100102)

Oct 16 14:26:52 corey kernel: pciehp_resume ENTRY
Oct 16 14:26:52 corey last message repeated 2 times
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Starting disk
Oct 16 14:26:52 corey kernel: ata2.00: configured for UDMA/33
Oct 16 14:26:52 corey kernel: ata1.00: configured for UDMA/133
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 16 14:26:52 corey kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 16 14:26:52 corey kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Oct 16 14:26:52 corey kernel: b44: eth0: Flow control is off for TX and off for RX.
Oct 16 14:26:52 corey kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
Oct 16 14:26:52 corey kernel: done.
Oct 16 14:26:52 corey kernel: usb 5-1: new high speed USB device using ehci_hcd and address 6
Oct 16 14:26:52 corey kernel: usb 5-1: configuration #1 chosen from 1 choice
Oct 16 14:26:52 corey kernel: hub 5-1:1.0: USB hub found
Oct 16 14:26:52 corey kernel: hub 5-1:1.0: 4 ports detected
Oct 16 14:26:52 corey kernel: Uhhuh. NMI received for unknown reason 80 on CPU 0.
Oct 16 14:26:52 corey kernel: You have some hardware problem, likely on the PCI bus.
Oct 16 14:26:52 corey kernel: Dazed and confused, but trying to continue
Oct 16 14:26:52 corey kernel: usb 5-7: USB disconnect, address 3
Oct 16 14:26:52 corey kernel: usb 5-7.2: USB disconnect, address 4
Oct 16 14:26:52 corey kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
Oct 16 14:26:52 corey kernel: pl2303 5-7.2:1.0: device disconnected
Oct 16 14:26:52 corey kernel: usb 5-7.3: USB disconnect, address 5
Oct 16 14:26:52 corey kernel: usb 5-7: new high speed USB device using ehci_hcd and address 7
Oct 16 14:26:53 corey kernel: usb 5-7: configuration #1 chosen from 1 choice
Oct 16 14:26:53 corey kernel: hub 5-7:1.0: USB hub found
Oct 16 14:26:53 corey kernel: hub 5-7:1.0: 4 ports detected
Oct 16 14:26:53 corey kernel: usb 5-1.4: new full speed USB device using ehci_hcd and address 8
Oct 16 14:26:53 corey kernel: usb 5-1.4: configuration #1 chosen from 1 choice
Oct 16 14:26:53 corey kernel: Bluetooth: HCI USB driver ver 2.9
Oct 16 14:26:53 corey kernel: usb 5-7.2: new full speed USB device using ehci_hcd and address 9
Oct 16 14:26:53 corey kernel: usb 5-7.2: configuration #1 chosen from 1 choice
Oct 16 14:26:53 corey kernel: pl2303 5-7.2:1.0: pl2303 converter detected
Oct 16 14:26:53 corey kernel: usb 5-7.2: pl2303 converter now attached to ttyUSB0
Oct 16 14:26:53 corey kernel: usb 5-7.3: new low speed USB device using ehci_hcd and address 10
Oct 16 14:26:54 corey kernel: usb 5-7.3: configuration #1 chosen from 1 choice
Oct 16 14:26:54 corey kernel: input: Logitech Optical USB Mouse as /class/input/input7
Oct 16 14:26:54 corey kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-7.3
Oct 16 14:26:54 corey kernel: usbcore: registered new interface driver hci_usb
Oct 16 14:26:54 corey hcid[3803]: HCI dev 0 registered
Oct 16 14:26:54 corey hcid[3803]: HCI dev 0 up
Oct 16 14:26:54 corey hcid[3803]: Device hci0 has been added
Oct 16 14:26:54 corey hcid[3803]: Starting security manager 0
Oct 16 14:26:54 corey hcid[3803]: Device hci0 has been activated
Oct 16 14:26:56 corey kernel: usb 5-1.4: USB disconnect, address 8
Oct 16 14:26:56 corey hcid[3803]: HCI dev 0 down
Oct 16 14:26:56 corey hcid[3803]: Stopping security manager 0
Oct 16 14:26:56 corey hcid[3803]: Device hci0 has been disabled
Oct 16 14:26:57 corey hcid[3803]: HCI dev 0 unregistered
Oct 16 14:26:57 corey hcid[3803]: Unregister path: /org/bluez/hci0
Oct 16 14:26:57 corey hcid[3803]: Device hci0 has been removed

Oct 16 14:27:45 corey logger: resumed, tried inserting ExpressCard, no effect.  Removing it and doing rmmod pciehp.

Oct 16 14:27:54 corey kernel: pciehp: unload_pciehpd()
Oct 16 14:27:54 corey kernel: Unload service driver hpdriver on pcie device 0000:00:1c.3:pcie02
Oct 16 14:27:54 corey kernel: pciehp: release_slot - physical_slot = 0013_0005
Oct 16 14:27:54 corey kernel: Unload service driver hpdriver on pcie device 0000:00:1c.1:pcie02
Oct 16 14:27:54 corey kernel: pciehp: release_slot - physical_slot = 0012_0003
Oct 16 14:27:54 corey kernel: Unload service driver hpdriver on pcie device 0000:00:1c.0:pcie02
Oct 16 14:27:54 corey kernel: pciehp: release_slot - physical_slot = 0011_0002
Oct 16 14:27:54 corey kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4 unloaded

Oct 16 14:28:06 corey logger: removed pciehp, now modprobing it again

Oct 16 14:28:09 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 10a0e0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:28:09 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: request_irq 16 for hpc0 (returns 0)
Oct 16 14:28:09 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:0:10
Oct 16 14:28:09 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.0
Oct 16 14:28:09 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=0, irq=10
Oct 16 14:28:09 corey kernel: pciehp: get_power_status - physical_slot = 0011_0002
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_attention_status - physical_slot = 0011_0002
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_latch_status - physical_slot = 0011_0002
Oct 16 14:28:09 corey kernel: pciehp: get_adapter_status - physical_slot = 0011_0002
Oct 16 14:28:09 corey kernel: pciehp: Registering bus=b dev=0 hp_slot=0 sun=2 slot_device_offset=0
Oct 16 14:28:09 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d2
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 18a0e0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 40
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:28:09 corey kernel: pciehp: pci resource[8] start=0xefc00000(len=0x100000)
Oct 16 14:28:09 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: request_irq 17 for hpc1 (returns 0)
Oct 16 14:28:09 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:1:11
Oct 16 14:28:09 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.1
Oct 16 14:28:09 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=1, irq=11
Oct 16 14:28:09 corey kernel: pciehp: get_power_status - physical_slot = 0012_0003
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_attention_status - physical_slot = 0012_0003
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_latch_status - physical_slot = 0012_0003
Oct 16 14:28:09 corey kernel: pciehp: get_adapter_status - physical_slot = 0012_0003
Oct 16 14:28:09 corey kernel: pciehp: Registering bus=c dev=0 hp_slot=0 sun=3 slot_device_offset=0
Oct 16 14:28:09 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: hotplug controller vendor id 0x8086 device id 0x27d6
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: pcie_cap_base 40
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: CAPREG offset 42 cap_reg 141
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCAP offset 54 slot_cap 28a0e0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTSTATUS offset 5a slot_status 100
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL offset 58 slot_ctrl 8
Oct 16 14:28:09 corey kernel: pciehp: pci resource[7] start=0xd000(len=0x1000)
Oct 16 14:28:09 corey kernel: pciehp: pci resource[8] start=0xefa00000(len=0x200000)
Oct 16 14:28:09 corey kernel: pciehp: pci resource[9] start=0xe0000000(len=0x200000)
Oct 16 14:28:09 corey kernel: pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: SLOTCTRL 58 value read 8
Oct 16 14:28:09 corey kernel: pciehp: pcie_init: request_irq 18 for hpc2 (returns 0)
Oct 16 14:28:09 corey kernel: pciehp: pciehp ctrl b:d:f:irq=0x0:1c:3:12
Oct 16 14:28:09 corey kernel: pciehp: Bypassing BIOS check for pciehp use on 0000:00:1c.3
Oct 16 14:28:09 corey kernel: pciehp: pciehp_probe: ctrl bus=0x0, device=1c, function=3, irq=12
Oct 16 14:28:09 corey kernel: pciehp: get_power_status - physical_slot = 0013_0005
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_attention_status - physical_slot = 0013_0005
Oct 16 14:28:09 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:28:09 corey kernel: pciehp: get_latch_status - physical_slot = 0013_0005
Oct 16 14:28:09 corey kernel: pciehp: get_adapter_status - physical_slot = 0013_0005
Oct 16 14:28:09 corey kernel: pciehp: Registering bus=d dev=0 hp_slot=0 sun=5 slot_device_offset=0
Oct 16 14:28:09 corey kernel: Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
Oct 16 14:28:09 corey kernel: pciehp: pcie_port_service_register = 0
Oct 16 14:28:09 corey kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4

Oct 16 14:28:18 corey logger: now inserting ExpressCard

Oct 16 14:28:21 corey kernel: pciehp: pcie_isr: intr_loc 8
Oct 16 14:28:21 corey kernel: pciehp: pcie_isr: pciehp_readw(SLOTCTRL) with value 28
Oct 16 14:28:21 corey kernel: pciehp: pcie_isr: pciehp_readw(SLOTSTATUS) with value 148
Oct 16 14:28:21 corey kernel: pciehp: pciehp:  Presence/Notify input change.
Oct 16 14:28:21 corey kernel: pciehp: Card present on Slot(0013_0005)
Oct 16 14:28:21 corey kernel: pciehp: pcie_isr: Unmask Hot-plug Interrupt Enable
Oct 16 14:28:21 corey kernel: pciehp: pcie_isr: pciehp_writew(SLOTSTATUS) with value 1f
Oct 16 14:28:21 corey kernel: pciehp: Surprise Removal
Oct 16 14:28:21 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:28:21 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:28:21 corey kernel: pciehp: board_added: slot device, slot offset, hp slot = 0, 0 ,0
Oct 16 14:28:22 corey kernel: pciehp: hpc_check_lnk_status: lnk_status = 3011
Oct 16 14:28:22 corey kernel: program_fw_provided_values: Could not get hotplug parameters
Oct 16 14:28:22 corey kernel: pciehp: hpc_get_power_status: SLOTCTRL 58 value read 28
Oct 16 14:28:22 corey kernel: pciehp: hpc_get_attention_status: SLOTCTRL 58, value read 28
Oct 16 14:28:22 corey kernel: sata_sil24 0000:0d:00.0: version 1.0
Oct 16 14:28:22 corey kernel: PCI: Enabling device 0000:0d:00.0 (0000 -> 0003)
Oct 16 14:28:22 corey kernel: ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 19 (level, low) -> IRQ 18
Oct 16 14:28:22 corey kernel: PCI: Setting latency timer of device 0000:0d:00.0 to 64
Oct 16 14:28:22 corey kernel: scsi2 : sata_sil24
Oct 16 14:28:22 corey kernel: scsi3 : sata_sil24
Oct 16 14:28:22 corey kernel: ata3: SATA max UDMA/100 cmd 0xf8b98000 ctl 0x00000000 bmdma 0x00000000 irq 18
Oct 16 14:28:22 corey kernel: ata4: SATA max UDMA/100 cmd 0xf8b9a000 ctl 0x00000000 bmdma 0x00000000 irq 18
Oct 16 14:28:23 corey kernel: ata3: SATA link down (SStatus 0 SControl 300)
Oct 16 14:28:23 corey kernel: ata4: SATA link down (SStatus 0 SControl 300)

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: efd00000-efefffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [88] Subsystem: Dell Unknown device 01cd
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x16
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 1, PowerLimit 75.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [140] Unknown (5)

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express Unknown type IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
		Link: Latency L0s <64ns, L1 <1us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed unknown, Width x0
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x0
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 2, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Dell Unknown device 01cd
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
	Memory behind bridge: efc00000-efcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 3, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Dell Unknown device 01cd
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: efa00000-efbfffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 5, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Dell Unknown device 01cd
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 4: I/O ports at bf80 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at bf60 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at bf40 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 22
	Region 4: I/O ports at bf20 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Memory behind bridge: ef900000-ef9fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Subsystem: Dell Unknown device 01cd

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master])
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at bfa0 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
	Subsystem: Dell Unknown device 01cd
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 5
	Region 4: I/O ports at 10c0 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA])
	Subsystem: Dell Unknown device 2002
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 4
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at ee00 [size=256]
	Region 2: Memory at efdf0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at efe00000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <4us, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
		Link: Latency L0s <64ns, L1 <1us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x16

03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10 [OHCI])
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME+

03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 9
	Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 9
	Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
	Subsystem: Dell Unknown device 01cd
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 9
	Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
	Subsystem: Intel Corporation Unknown device 1000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at efcff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [e0] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
		Link: Latency L0s <128ns, L1 <64us
		Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Device Serial Number 6f-5e-72-ff-ff-d2-19-00

Follow-Ups:
- Re: PCIe Hotplug: NFG unless I boot with card already inserted.
  - From: Kristen Carlson Accardi <[email protected]>
- Re: PCIe Hotplug: NFG unless I boot with card already inserted.
  - From: Kristen Carlson Accardi <[email protected]>

References:
- PCIe Hotplug: NFG unless I boot with card already inserted.
  - From: Mark Lord <[email protected]>
- Re: PCIe Hotplug: NFG unless I boot with card already inserted.
  - From: Mark Lord <[email protected]>
- Re: PCIe Hotplug: NFG unless I boot with card already inserted.
  - From: Kristen Carlson Accardi <[email protected]>

Prev by Date: Asus Eeepc missing in alsa models list?
Next by Date: Re: [patch 2/3] Introduce BOOTMEM_EXCLUSIVE
Previous by thread: Re: PCIe Hotplug: NFG unless I boot with card already inserted.
Next by thread: Re: PCIe Hotplug: NFG unless I boot with card already inserted.
Index(es):
- Date
- Thread

[Index of Archives] [Kernel Newbies] [Netfilter] [Bugtraq] [Photo] [Stuff] [Gimp] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux Security] [Linux RAID] [Video 4 Linux] [Linux for the blind] [Linux Resources]