On Monday 15 October 2007 19:05:18 Lukas Razik wrote:
> Kernel Version: 2.6.22.9 (and others)
>
> Hello!
>
> I've an issue with a RTL8169 based network card (the same with a RTL8139
> card and another system)
>
> # lspci -v :
> 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit
> Ethernet
> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
> I/O ports at e000 [size=256]
> Memory at f9fdd000 (32-bit, non-prefetchable) [size=256]
> [virtual] Expansion ROM at 10000000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
>
> At system startup I get the following messages:
> # dmesg :
> ...
> r8169 Gigabit Ethernet driver 2.2LK loaded
> eth0: RTL8169sb/8110sb at 0xc4830000, 00:0c:76:a0:05:92, IRQ 12
> ...
>
> But if I try to ifconfig the eth0 interface, I get these error messages:
> # ifconfig eth0 192.168.0.2
> SIOCSIFADDR: No such device
> eth0: ERROR while getting interface flags: No such device
>
> But if I try to ifconfig eth1 then it configures my network device which
> was detected as eth0 at boot time...
> ifconfig eth1 192.168.0.2
>
> This leads to errors with other ethernet interfaces...
> Any ideas what there's going wrong?
udev - persistent network rules in /etc/udev/rules.d/
--
Ondrej Zary
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]