Greg,
from linus's git this morning..
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level,
low) -> IRQ 21
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: irq 21, io mem 0xdefbec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level,
low) -> IRQ 22
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xdefbf000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
sysfs: duplicate filename 'bInterfaceNumber' can not be created
WARNING: at fs/sysfs/dir.c:425 sysfs_add_one()
Call Trace:
[<ffffffff802bf326>] sysfs_add_one+0x54/0xbd
[<ffffffff802bee22>] sysfs_add_file+0x50/0x81
[<ffffffff802c07ec>] sysfs_create_group+0x9a/0xf2
[<ffffffff80616cb6>] usb_create_sysfs_intf_files+0x32/0xc7
[<ffffffff80613762>] usb_set_configuration+0x49d/0x4c0
[<ffffffff8061a672>] generic_probe+0x53/0x95
[<ffffffff804a57d3>] driver_probe_device+0xd3/0x150
[<ffffffff804a5850>] __device_attach+0x0/0x5
[<ffffffff804a4aec>] bus_for_each_drv+0x40/0x71
[<ffffffff804a58db>] device_attach+0x63/0x7a
[<ffffffff804a4a5e>] bus_attach_device+0x2a/0x78
[<ffffffff804a3a20>] device_add+0x308/0x51e
[<ffffffff8060ef04>] usb_new_device+0x47/0x80
[<ffffffff8060facd>] hub_thread+0x75a/0xb4a
[<ffffffff80245787>] autoremove_wake_function+0x0/0x2e
[<ffffffff8060f373>] hub_thread+0x0/0xb4a
[<ffffffff8024565d>] kthread+0x47/0x76
[<ffffffff8020ca58>] child_rip+0xa/0x12
[<ffffffff80245616>] kthread+0x0/0x76
[<ffffffff8020ca4e>] child_rip+0x0/0x12
usb 2-3: new full speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-5: new low speed USB device using ohci_hcd and address 3
usb 2-5: configuration #1 chosen from 1 choice
scsi15 : SCSI emulation for USB Mass Storage devices
usb 2-3.1: new low speed USB device using ohci_hcd and address 4
usb 2-3.1: configuration #1 chosen from 1 choice
usb 2-3.4: new low speed USB device using ohci_hcd and address 5
usb 2-3.4: configuration #1 chosen from 1 choice
YH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
