>>> The patch below contains a small code clean-up for the NTFS driver: all
>>> static char pointers to error message strings have been replaced by
>>> static char arrays.
While doing that clean-up, shouldn't these be converted as well?
folkert@muur:/usr/src/linux$ find . -name \*.c -print0 | xargs -0 grep "^ *char *\* *[a-zA-Z0-9_]* *= *\".*\".*;"
./arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c:char *toshiba_name = "";
./arch/ppc/boot/simple/misc-embedded.c:char *bootrom_cmdline = "";
./arch/blackfin/mach-bf561/boards/ezkit.c:char *bfin_board_name = "ADDS-BF561-EZKIT";
./arch/blackfin/mach-bf561/boards/generic_board.c:char *bfin_board_name = "UNKNOWN BOARD";
./arch/blackfin/mach-bf561/boards/tepla.c:char *bfin_board_name = "Tepla-BF561";
./arch/blackfin/mach-bf561/boards/cm_bf561.c:char *bfin_board_name = "Bluetechnix CM BF561";
./arch/blackfin/mach-bf533/boards/ezkit.c:char *bfin_board_name = "ADDS-BF533-EZKIT";
./arch/blackfin/mach-bf533/boards/cm_bf533.c:char *bfin_board_name = "Bluetechnix CM BF533";
./arch/blackfin/mach-bf533/boards/stamp.c:char *bfin_board_name = "ADDS-BF533-STAMP";
./arch/blackfin/mach-bf533/boards/generic_board.c:char *bfin_board_name = "UNKNOWN BOARD";
./arch/blackfin/mach-bf537/boards/stamp.c:char *bfin_board_name = "ADDS-BF537-STAMP";
./arch/blackfin/mach-bf537/boards/generic_board.c:char *bfin_board_name = "UNKNOWN BOARD";
./arch/blackfin/mach-bf537/boards/pnav10.c:char *bfin_board_name = "PNAV-1.0";
./arch/blackfin/mach-bf537/boards/cm_bf537.c:char *bfin_board_name = "Bluetechnix CM BF537";
./arch/blackfin/mach-bf548/boards/ezkit.c:char *bfin_board_name = "ADSP-BF548-EZKIT";
./drivers/net/pcmcia/fmvj18x_cs.c: char *card_name = "unknown";
./drivers/atm/fore200e_mkfirm.c:char* default_basename = "pca200e"; /* was initially written for the PCA-200E firmware */
./drivers/atm/fore200e_mkfirm.c:char* default_infname = "<stdin>";
./drivers/atm/fore200e_mkfirm.c:char* default_outfname = "<stdout>";
./drivers/scsi/aic7xxx_old.c: char *channel = "";
./drivers/scsi/aic7xxx_old/aic7xxx_proc.c: char *channel = "";
./drivers/scsi/aic7xxx_old/aic7xxx_proc.c: char *ultra = "";
./drivers/scsi/aic7xxx_old/aic7xxx_proc.c: char *wide = "Narrow ";
./drivers/isdn/i4l/isdn_ppp.c:char *isdn_ppp_revision = "$Revision: 1.1.2.3 $";
./drivers/isdn/i4l/isdn_tty.c:char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
./drivers/isdn/i4l/isdn_net.c:char *isdn_net_revision = "$Revision: 1.1.2.2 $";
./drivers/isdn/i4l/isdn_audio.c:char *isdn_audio_revision = "$Revision: 1.1.2.2 $";
./drivers/isdn/i4l/isdn_v110.c:char *isdn_v110_revision = "$Revision: 1.1.2.2 $";
./drivers/isdn/hysdn/hysdn_net.c:char *hysdn_net_revision = "$Revision: 1.8.6.4 $";
./drivers/isdn/hardware/eicon/diva_didd.c:char *DRIVERRELEASE_DIDD = "2.0";
./drivers/isdn/hardware/eicon/divasmain.c:char *DRIVERRELEASE_DIVAS = "2.0";
./drivers/isdn/hardware/eicon/divasi.c:char *DRIVERRELEASE_IDI = "2.0";
./drivers/isdn/hardware/eicon/divamnt.c:char *DRIVERRELEASE_MNT = "2.0";
./drivers/serial/mcfserial.c:char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
Folkert van Heusden
--
MultiTail is a versatile tool for watching logfiles and output of
commands. Filtering, coloring, merging, diff-view, etc.
http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
