>From: Dmitry Torokhov [mailto:[email protected]]
>Sent: Donnerstag, 11. Oktober 2007 19:27
>To: [email protected]
>Cc: Michael Hennerich; [email protected]; Linux
Kernel;
>[email protected]
>Subject: Re: [PATCH try #3] Blackfin BF54x Input Keypad controller
driver
>
>On Thursday 11 October 2007, Bryan Wu wrote:
>> From: Michael Hennerich <[email protected]>
>> Date: Fri, 12 Oct 2007 00:20:19 +0800
>> Subject: [PATCH] Blackfin BF54x Input Keypad controller driver
>>
>> [try #2] Changelog:
>> - Coding style issue fixes
>> - using a temp variable for bf54x_kpad->input
>> - Other updates according to Dmitry's review
>>
>> [try #3] Changelog:
>> - Coding style cleanups
>> - Use local copy of keymap
>> - Remove empty PM functions
>> - Use input_set_drvdata() since input->private is going away
>
>
>This looks very good, thank youvery much. I have only 1 more suggestion
>(and I can make the changes locally, you don't need to resubmit) -
>since it is highly unlikely that we will have a keycode > 65535 do you
>think we could change keymap to unsigned short. It would save you a
>couple of bytes. I am also going to change "input->cdev.dev =
&pdev->dev;"
>to "input_dev->dev.parent = &pdev->dev;". Please let me know if you are
>OK with it.
Hi Dmitry,
Thanks for your excellent feedback and support.
We do a pretty similar thing like the omap keypad driver.
Our keycodes do not exceed KEY_MAX but we encode the ROW and COL into
the keycode matrix, in order simplify things in a "normal use case"? .
What we store is u32, 16-bit for the keycode and the upper for private
use. My understanding is that we then have to set input->keycodesize
also being u32.
Otherwise the generic input layer might get screwed up?!
Am I wrong here, or do I miss something?
Either this is a valid use case or I was inspired by a bad example.
Best regards,
Michael
>
>Thanks!
>
>
>>
>> Cc: Dmitry Torokhov <[email protected]>
>> Signed-off-by: Michael Hennerich <[email protected]>
>> Signed-off-by: Bryan Wu <[email protected]>
>> ---
>> arch/blackfin/mach-bf548/boards/ezkit.c | 2 +-
>> drivers/input/keyboard/Kconfig | 9 +
>> drivers/input/keyboard/Makefile | 2 +-
>> drivers/input/keyboard/bf54x-keys.c | 378
>++++++++++++++++++++++++++
>> include/asm-blackfin/mach-bf548/bf54x_keys.h | 17 ++
>> 5 files changed, 406 insertions(+), 2 deletions(-)
>> create mode 100644 drivers/input/keyboard/bf54x-keys.c
>> create mode 100644 include/asm-blackfin/mach-bf548/bf54x_keys.h
>>
>> diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c
>b/arch/blackfin/mach-bf548/boards/ezkit.c
>> index 2c47db4..6734b3d 100644
>> --- a/arch/blackfin/mach-bf548/boards/ezkit.c
>> +++ b/arch/blackfin/mach-bf548/boards/ezkit.c
>> @@ -88,7 +88,7 @@ static struct platform_device bf54x_lq043_device =
{
>> #endif
>>
>> #if defined(CONFIG_KEYBOARD_BFIN) ||
>defined(CONFIG_KEYBOARD_BFIN_MODULE)
>> -static int bf548_keymap[] = {
>> +static unsigned int bf548_keymap[] = {
>> KEYVAL(0, 0, KEY_ENTER),
>> KEYVAL(0, 1, KEY_HELP),
>> KEYVAL(0, 2, KEY_0),
>> diff --git a/drivers/input/keyboard/Kconfig
>b/drivers/input/keyboard/Kconfig
>> index c97d5eb..2136a9e 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -253,4 +253,13 @@ config KEYBOARD_GPIO
>> To compile this driver as a module, choose M here: the
>> module will be called gpio-keys.
>>
>> +config KEYBOARD_BFIN
>> + tristate "Blackfin BF54x keypad support"
>> + depends on (BF54x)
>> + help
>> + Say Y here if you want to use the BF54x keypad.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called bf54x-keypad.
>> +
>> endif
>> diff --git a/drivers/input/keyboard/Makefile
>b/drivers/input/keyboard/Makefile
>> index 28d211b..3123277 100644
>> --- a/drivers/input/keyboard/Makefile
>> +++ b/drivers/input/keyboard/Makefile
>> @@ -21,4 +21,4 @@ obj-$(CONFIG_KEYBOARD_OMAP) +=
omap-keypad.o
>> obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o
>> obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
>> obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
>> -
>> +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
>> diff --git a/drivers/input/keyboard/bf54x-keys.c
>b/drivers/input/keyboard/bf54x-keys.c
>> new file mode 100644
>> index 0000000..2833c60
>> --- /dev/null
>> +++ b/drivers/input/keyboard/bf54x-keys.c
>> @@ -0,0 +1,378 @@
>> +/*
>> + * File: drivers/input/keyboard/bf54x-keys.c
>> + * Based on:
>> + * Author: Michael Hennerich <[email protected]>
>> + *
>> + * Created:
>> + * Description: keypad driver for Analog Devices Blackfin BF54x
>Processors
>> + *
>> + *
>> + * Modified:
>> + * Copyright 2007 Analog Devices Inc.
>> + *
>> + * Bugs: Enter bugs at http://blackfin.uclinux.org/
>> + *
>> + * This program is free software; you can redistribute it and/or
modify
>> + * it under the terms of the GNU General Public License as published
by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, see the file COPYING, or write
>> + * to the Free Software Foundation, Inc.,
>> + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/version.h>
>> +
>> +#include <linux/init.h>
>> +#include <linux/fs.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/sched.h>
>> +#include <linux/pm.h>
>> +#include <linux/sysctl.h>
>> +#include <linux/proc_fs.h>
>> +#include <linux/delay.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/input.h>
>> +#include <linux/irq.h>
>> +
>> +#include <asm/portmux.h>
>> +#include <asm/mach/bf54x_keys.h>
>> +
>> +#define DRV_NAME "bf54x-keys"
>> +#define TIME_SCALE 100 /* 100 ns */
>> +#define MAX_MULT (0xFF * TIME_SCALE)
>> +#define MAX_RC 8 /* Max Row/Col */
>> +
>> +static const u16 per_rows[] = {
>> + P_KEY_ROW7,
>> + P_KEY_ROW6,
>> + P_KEY_ROW5,
>> + P_KEY_ROW4,
>> + P_KEY_ROW3,
>> + P_KEY_ROW2,
>> + P_KEY_ROW1,
>> + P_KEY_ROW0,
>> + 0
>> +};
>> +
>> +static const u16 per_cols[] = {
>> + P_KEY_COL7,
>> + P_KEY_COL6,
>> + P_KEY_COL5,
>> + P_KEY_COL4,
>> + P_KEY_COL3,
>> + P_KEY_COL2,
>> + P_KEY_COL1,
>> + P_KEY_COL0,
>> + 0
>> +};
>> +
>> +struct bf54x_kpad {
>> + struct input_dev *input;
>> + int irq;
>> + int lastkey;
>> + unsigned int *keycode;
>> + struct timer_list timer;
>> + unsigned int keyup_test_jiffies;
>> +};
>> +
>> +static inline int bfin_kpad_find_key(struct bf54x_kpad *bf54x_kpad,
>> + struct input_dev *input, u16 keyident)
>> +{
>> + u16 i;
>> +
>> + for (i = 0; i < input->keycodemax; i++)
>> + if ((bf54x_kpad->keycode[i] >> 16) == keyident)
>> + return bf54x_kpad->keycode[i] & 0xffff;
>> + return -1;
>> +}
>> +
>> +
>> +static inline u16 bfin_kpad_get_prescale(u32 timescale)
>> +{
>> + u32 sclk = get_sclk();
>> +
>> + return ((((sclk / 1000) * timescale) / 1024) - 1);
>> +}
>> +
>> +static inline u16 bfin_kpad_get_keypressed(struct bf54x_kpad
>*bf54x_kpad)
>> +{
>> + return (bfin_read_KPAD_STAT() & KPAD_PRESSED);
>> +}
>> +
>> +static inline void bfin_kpad_clear_irq(void)
>> +{
>> + bfin_write_KPAD_STAT(0xFFFF);
>> + bfin_write_KPAD_ROWCOL(0xFFFF);
>> +}
>> +
>> +static void bfin_kpad_timer(unsigned long data)
>> +{
>> + struct platform_device *pdev = (struct platform_device *) data;
>> + struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> +
>> + if (bfin_kpad_get_keypressed(bf54x_kpad)) {
>> + /* Try again later */
>> + mod_timer(&bf54x_kpad->timer, jiffies
>> + + bf54x_kpad->keyup_test_jiffies);
>> + return;
>> + }
>> +
>> + input_report_key(bf54x_kpad->input, bf54x_kpad->lastkey, 0);
>> + input_sync(bf54x_kpad->input);
>> +
>> + /* Clear IRQ Status */
>> +
>> + bfin_kpad_clear_irq();
>> + enable_irq(bf54x_kpad->irq);
>> +}
>> +
>> +static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
>> +{
>> + struct platform_device *pdev = dev_id;
>> + struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> + struct input_dev *input = bf54x_kpad->input;
>> + int key;
>> + u16 rowcol = bfin_read_KPAD_ROWCOL();
>> +
>> + key = bfin_kpad_find_key(bf54x_kpad, input, rowcol);
>> +
>> + input_report_key(input, key, 1);
>> + input_sync(input);
>> +
>> + if (bfin_kpad_get_keypressed(bf54x_kpad)) {
>> + disable_irq(bf54x_kpad->irq);
>> + bf54x_kpad->lastkey = key;
>> + mod_timer(&bf54x_kpad->timer, jiffies
>> + + bf54x_kpad->keyup_test_jiffies);
>> +
>> + return IRQ_HANDLED;
>> + }
>> +
>> + input_report_key(input, key, 0);
>> + input_sync(input);
>> +
>> + bfin_kpad_clear_irq();
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int __devinit bfin_kpad_probe(struct platform_device *pdev)
>> +{
>> + struct bf54x_kpad *bf54x_kpad;
>> + struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
>> + struct input_dev *input;
>> + int i, error;
>> +
>> +
>> + if (!pdata->rows || !pdata->cols || !pdata->keymap) {
>> + printk(KERN_ERR DRV_NAME"No rows, cols or keymap from
>pdata\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!pdata->keymapsize || pdata->keymapsize > (pdata->rows *
pdata-
>>cols)) {
>> + printk(KERN_ERR DRV_NAME"Invalid keymapsize\n");
>> + return -EINVAL;
>> + }
>> +
>> + bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL);
>> +
>> + if (!bf54x_kpad)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, bf54x_kpad);
>> +
>> + bf54x_kpad->keycode = kmalloc(pdata->keymapsize *
sizeof(unsigned
>int), GFP_KERNEL);
>> +
>> + if (!bf54x_kpad->keycode) {
>> + error = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
>> + !pdata->coldrive_time || !pdata->coldrive_time >
MAX_MULT) {
>> + printk(KERN_ERR DRV_NAME
>> + "Invalid Debounce/Columdrive Time from
pdata\n");
>> + bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
>> + } else {
>> + bfin_write_KPAD_MSEL(((pdata->debounce_time /
TIME_SCALE)
>> + & DBON_SCALE) | (((pdata->coldrive_time /
TIME_SCALE) <<
>8)
>> + & COLDRV_SCALE));
>> +
>> + }
>> +
>> + if (!pdata->keyup_test_interval) {
>> + bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50);
>> + } else {
>> + bf54x_kpad->keyup_test_jiffies =
>> + msecs_to_jiffies(pdata->keyup_test_interval);
>> + }
>> +
>> + if (peripheral_request_list((u16 *)&per_rows[MAX_RC -
pdata->rows],
>DRV_NAME)) {
>> + printk(KERN_ERR DRV_NAME
>> + ": Requesting Peripherals failed\n");
>> + error = -EFAULT;
>> + goto out0;
>> + }
>> +
>> + if (peripheral_request_list((u16 *)&per_cols[MAX_RC -
pdata->cols],
>DRV_NAME)) {
>> + printk(KERN_ERR DRV_NAME
>> + ": Requesting Peripherals failed\n");
>> + error = -EFAULT;
>> + goto out1;
>> + }
>> +
>> + bf54x_kpad->irq = platform_get_irq(pdev, 0);
>> +
>> + if (bf54x_kpad->irq < 0) {
>> + error = -ENODEV;
>> + goto out2;
>> + }
>> +
>> + error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
>> + IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
>> +
>> + if (error) {
>> + printk(KERN_ERR DRV_NAME
>> + ": unable to claim irq %d; error %d\n",
>> + bf54x_kpad->irq, error);
>> + error = -EBUSY;
>> + goto out2;
>> + }
>> +
>> + input = input_allocate_device();
>> +
>> + if (!input) {
>> + error = -ENOMEM;
>> + goto out3;
>> + }
>> +
>> + bf54x_kpad->input = input;
>> +
>> + input->name = pdev->name;
>> + input->phys = "bf54x-keys/input0";
>> + input->cdev.dev = &pdev->dev;
>> +
>> + input_set_drvdata(input, bf54x_kpad);
>> +
>> + input->id.bustype = BUS_HOST;
>> + input->id.vendor = 0x0001;
>> + input->id.product = 0x0001;
>> + input->id.version = 0x0100;
>> +
>> + input->keycodesize = sizeof(unsigned int);
>> + input->keycodemax = pdata->keymapsize;
>> +
>> + memcpy(bf54x_kpad->keycode, pdata->keymap, input->keycodesize *
>input->keycodemax);
>> +
>> + input->keycode = bf54x_kpad->keycode;
>> +
>> + /* setup input device */
>> + __set_bit(EV_KEY, input->evbit);
>> +
>> + if (pdata->repeat)
>> + __set_bit(EV_REP, input->evbit);
>> +
>> + for (i = 0; i < input->keycodemax; i++)
>> + __set_bit(bf54x_kpad->keycode[i] & KEY_MAX,
input->keybit);
>> +
>> + __clear_bit(KEY_RESERVED, input->keybit);
>> +
>> + error = input_register_device(input);
>> +
>> + if (error) {
>> + printk(KERN_ERR DRV_NAME
>> + ": Unable to register input device (%d)\n",
error);
>> + goto out4;
>> + }
>> +
>> + /* Init Keypad Key Up/Release test timer */
>> +
>> + setup_timer(&bf54x_kpad->timer, bfin_kpad_timer, (unsigned long)
>pdev);
>> +
>> + bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE));
>> +
>> + bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) |
>> + (((pdata->rows - 1) << 10) & KPAD_ROWEN)
|
>> + (2 & KPAD_IRQMODE));
>> +
>> +
>> + bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
>> +
>> + printk(KERN_ERR DRV_NAME
>> + ": Blackfin BF54x Keypad registered IRQ %d\n",
bf54x_kpad-
>>irq);
>> +
>> + return 0;
>> +
>> +
>> +out4:
>> + input_free_device(input);
>> +out3:
>> + free_irq(bf54x_kpad->irq, pdev);
>> +out2:
>> + peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
>> +out1:
>> + peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
>> +out0:
>> + kfree(bf54x_kpad->keycode);
>> +out:
>> + kfree(bf54x_kpad);
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return error;
>> +}
>> +
>> +static int __devexit bfin_kpad_remove(struct platform_device *pdev)
>> +{
>> + struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
>> + struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
>> +
>> +
>> + del_timer_sync(&bf54x_kpad->timer);
>> + free_irq(bf54x_kpad->irq, pdev);
>> +
>> + peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
>> + peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
>> +
>> + input_unregister_device(bf54x_kpad->input);
>> +
>> + kfree(bf54x_kpad->keycode);
>> + kfree(bf54x_kpad);
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +struct platform_driver bfin_kpad_device_driver = {
>> + .probe = bfin_kpad_probe,
>> + .remove = __devexit_p(bfin_kpad_remove),
>> + .driver = {
>> + .name = DRV_NAME,
>> + }
>> +};
>> +
>> +static int __init bfin_kpad_init(void)
>> +{
>> + return platform_driver_register(&bfin_kpad_device_driver);
>> +}
>> +
>> +static void __exit bfin_kpad_exit(void)
>> +{
>> + platform_driver_unregister(&bfin_kpad_device_driver);
>> +}
>> +
>> +module_init(bfin_kpad_init);
>> +module_exit(bfin_kpad_exit);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Michael Hennerich <[email protected]>");
>> +MODULE_DESCRIPTION("Keypad driver for BF54x Processors");
>> diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h
b/include/asm-
>blackfin/mach-bf548/bf54x_keys.h
>> new file mode 100644
>> index 0000000..8ab1f91
>> --- /dev/null
>> +++ b/include/asm-blackfin/mach-bf548/bf54x_keys.h
>> @@ -0,0 +1,17 @@
>> +#ifndef _BFIN_KPAD_H
>> +#define _BFIN_KPAD_H
>> +
>> +struct bfin_kpad_platform_data {
>> + int rows;
>> + int cols;
>> + unsigned int *keymap;
>> + unsigned short keymapsize;
>> + unsigned short repeat;
>> + u32 debounce_time; /* in ns */
>> + u32 coldrive_time; /* in ns */
>> + u32 keyup_test_interval; /* in ms */
>> +};
>> +
>> +#define KEYVAL(col, row, val) (((1 << col) << 24) | ((1 << row) <<
16) |
>(val))
>> +
>> +#endif
>
>--
>Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
