Signed-off-by: Bryan Wu <[email protected]>
---
drivers/i2c/busses/Kconfig | 6 +-
drivers/i2c/busses/i2c-bfin-twi.c | 246 ++++++++++++++--------
include/asm-blackfin/mach-bf548/cdefBF54x_base.h | 33 ---
3 files changed, 160 insertions(+), 125 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9f3a4cd..dc14449 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -92,10 +92,10 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537 || BF54x
+ depends on I2C && (BF534 || BF536 || BF537 || BF54x)
help
This is the TWI I2C device driver for Blackfin 534/536/537/54x.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
config I2C_BLACKFIN_TWI_CLK_KHZ
@@ -104,7 +104,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
range 10 400
default 50
help
- The unit of the TWI clock is kHz.
+ The unit of the TWI clock is kilo HZ.
config I2C_ELEKTOR
tristate "Elektor ISA card"
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index d636a84..394b1f4 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -7,6 +7,10 @@
*
* Copyright (c) 2005-2007 Analog Devices, Inc.
*
+ * Modified:
+ * Aug 01, 2007 add platform_resource interface to support multi-port
+ * TWI controllers. (Bryan Wu <[email protected]>)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -65,41 +69,64 @@ struct bfin_twi_iface {
int cur_msg;
};
-static struct bfin_twi_iface twi_iface;
+static u32 twi_regs_base;
+
+#define DEFINE_TWI_REG(reg, off) \
+static inline u16 read_##reg(void) \
+ { return bfin_read16(twi_regs_base + off); } \
+static inline void write_##reg(u16 v) \
+ {bfin_write16(twi_regs_base + off, v); }
+
+DEFINE_TWI_REG(CLKDIV, 0x00)
+DEFINE_TWI_REG(CONTROL, 0x04)
+DEFINE_TWI_REG(SLAVE_CTL, 0x08)
+DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
+DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
+DEFINE_TWI_REG(MASTER_CTL, 0x14)
+DEFINE_TWI_REG(MASTER_STAT, 0x18)
+DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
+DEFINE_TWI_REG(INT_STAT, 0x20)
+DEFINE_TWI_REG(INT_MASK, 0x24)
+DEFINE_TWI_REG(FIFO_CTL, 0x28)
+DEFINE_TWI_REG(FIFO_STAT, 0x2C)
+DEFINE_TWI_REG(XMT_DATA8, 0x80)
+DEFINE_TWI_REG(XMT_DATA16, 0x84)
+DEFINE_TWI_REG(RCV_DATA8, 0x88)
+DEFINE_TWI_REG(RCV_DATA16, 0x8C)
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
{
- unsigned short twi_int_status = bfin_read_TWI_INT_STAT();
- unsigned short mast_stat = bfin_read_TWI_MASTER_STAT();
+ unsigned short twi_int_status = read_INT_STAT();
+ unsigned short mast_stat = read_MASTER_STAT();
if (twi_int_status & XMTSERV) {
/* Transmit next data */
if (iface->writeNum > 0) {
- bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ write_XMT_DATA8(*(iface->transPtr++));
iface->writeNum--;
}
/* start receive immediately after complete sending in
* combine mode.
*/
else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(read_MASTER_CTL()
| MDIR | RSTART);
else if (iface->manual_stop)
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(read_MASTER_CTL()
| STOP);
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num)
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(read_MASTER_CTL()
| RSTART);
SSYNC();
/* Clear status */
- bfin_write_TWI_INT_STAT(XMTSERV);
+ write_INT_STAT(XMTSERV);
SSYNC();
}
if (twi_int_status & RCVSERV) {
if (iface->readNum > 0) {
/* Receive next data */
- *(iface->transPtr) = bfin_read_TWI_RCV_DATA8();
+ *(iface->transPtr) = read_RCV_DATA8();
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
/* Change combine mode into sub mode after
* read first data.
@@ -114,33 +141,33 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->transPtr++;
iface->readNum--;
} else if (iface->manual_stop) {
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(read_MASTER_CTL()
| STOP);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num) {
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(read_MASTER_CTL()
| RSTART);
SSYNC();
}
/* Clear interrupt source */
- bfin_write_TWI_INT_STAT(RCVSERV);
+ write_INT_STAT(RCVSERV);
SSYNC();
}
if (twi_int_status & MERR) {
- bfin_write_TWI_INT_STAT(MERR);
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_STAT(0x3e);
- bfin_write_TWI_MASTER_CTL(0);
+ write_INT_STAT(MERR);
+ write_INT_MASK(0);
+ write_MASTER_STAT(0x3e);
+ write_MASTER_CTL(0);
SSYNC();
iface->result = -EIO;
/* if both err and complete int stats are set, return proper
* results.
*/
if (twi_int_status & MCOMP) {
- bfin_write_TWI_INT_STAT(MCOMP);
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_CTL(0);
+ write_INT_STAT(MCOMP);
+ write_INT_MASK(0);
+ write_MASTER_CTL(0);
SSYNC();
/* If it is a quick transfer, only address bug no data,
* not an err, return 1.
@@ -157,7 +184,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
return;
}
if (twi_int_status & MCOMP) {
- bfin_write_TWI_INT_STAT(MCOMP);
+ write_INT_STAT(MCOMP);
SSYNC();
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
if (iface->readNum == 0) {
@@ -166,22 +193,22 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
*/
iface->readNum = 1;
iface->manual_stop = 1;
- bfin_write_TWI_MASTER_CTL(
- bfin_read_TWI_MASTER_CTL()
+ write_MASTER_CTL(
+ read_MASTER_CTL()
| (0xff << 6));
} else {
/* set the readd number in other
* combine mode.
*/
- bfin_write_TWI_MASTER_CTL(
- (bfin_read_TWI_MASTER_CTL() &
+ write_MASTER_CTL(
+ (read_MASTER_CTL() &
(~(0xff << 6))) |
( iface->readNum << 6));
}
/* remove restart bit and enable master receive */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
+ write_MASTER_CTL(read_MASTER_CTL() &
~RSTART);
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
+ write_MASTER_CTL(read_MASTER_CTL() |
MEN | MDIR);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
@@ -191,7 +218,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->writeNum = iface->readNum =
iface->pmsg[iface->cur_msg].len;
/* Set Transmit device address */
- bfin_write_TWI_MASTER_ADDR(
+ write_MASTER_ADDR(
iface->pmsg[iface->cur_msg].addr);
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
@@ -199,7 +226,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
- bfin_write_TWI_XMT_DATA8(
+ write_XMT_DATA8(
*(iface->transPtr++));
iface->writeNum--;
SSYNC();
@@ -207,23 +234,23 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
}
if (iface->pmsg[iface->cur_msg].len <= 255)
- bfin_write_TWI_MASTER_CTL(
+ write_MASTER_CTL(
iface->pmsg[iface->cur_msg].len << 6);
else if (iface->pmsg[iface->cur_msg].len > 255) {
- bfin_write_TWI_MASTER_CTL(0xff << 6);
+ write_MASTER_CTL(0xff << 6);
iface->manual_stop = 1;
}
/* remove restart bit and enable master receive */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
+ write_MASTER_CTL(read_MASTER_CTL() &
~RSTART);
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
+ write_MASTER_CTL(read_MASTER_CTL() |
MEN | ((iface->read_write == I2C_SMBUS_READ) ?
MDIR : 0));
SSYNC();
} else {
iface->result = 1;
- bfin_write_TWI_INT_MASK(0);
- bfin_write_TWI_MASTER_CTL(0);
+ write_INT_MASK(0);
+ write_MASTER_CTL(0);
SSYNC();
complete(&iface->complete);
}
@@ -273,12 +300,12 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *pmsg;
int rc = 0;
- if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
+ if (!(read_CONTROL() & TWI_ENA))
return -ENXIO;
mutex_lock(&iface->twi_lock);
- while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
+ while (read_MASTER_STAT() & BUSBUSY) {
mutex_unlock(&iface->twi_lock);
yield();
mutex_lock(&iface->twi_lock);
@@ -302,14 +329,14 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->result = 0;
iface->timeout_count = 10;
/* Set Transmit device address */
- bfin_write_TWI_MASTER_ADDR(pmsg->addr);
+ write_MASTER_ADDR(pmsg->addr);
/* FIFO Initiation. Data in FIFO should be
* discarded before start a new operation.
*/
- bfin_write_TWI_FIFO_CTL(0x3);
+ write_FIFO_CTL(0x3);
SSYNC();
- bfin_write_TWI_FIFO_CTL(0);
+ write_FIFO_CTL(0);
SSYNC();
if (pmsg->flags & I2C_M_RD)
@@ -318,23 +345,23 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
- bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ write_XMT_DATA8(*(iface->transPtr++));
iface->writeNum--;
SSYNC();
}
}
/* clear int stat */
- bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
+ write_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
/* Interrupt mask . Enable XMT, RCV interrupt */
- bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
+ write_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
SSYNC();
if (pmsg->len <= 255)
- bfin_write_TWI_MASTER_CTL(pmsg->len << 6);
+ write_MASTER_CTL(pmsg->len << 6);
else if (pmsg->len > 255) {
- bfin_write_TWI_MASTER_CTL(0xff << 6);
+ write_MASTER_CTL(0xff << 6);
iface->manual_stop = 1;
}
@@ -342,7 +369,7 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
add_timer(&iface->timeout_timer);
/* Master enable */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ write_MASTER_CTL(read_MASTER_CTL() | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
SSYNC();
@@ -371,12 +398,12 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
struct bfin_twi_iface *iface = adap->algo_data;
int rc = 0;
- if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
+ if (!(read_CONTROL() & TWI_ENA))
return -ENXIO;
mutex_lock(&iface->twi_lock);
- while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
+ while (read_MASTER_STAT() & BUSBUSY) {
mutex_unlock(&iface->twi_lock);
yield();
mutex_lock(&iface->twi_lock);
@@ -452,15 +479,15 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
/* FIFO Initiation. Data in FIFO should be discarded before
* start a new operation.
*/
- bfin_write_TWI_FIFO_CTL(0x3);
+ write_FIFO_CTL(0x3);
SSYNC();
- bfin_write_TWI_FIFO_CTL(0);
+ write_FIFO_CTL(0);
/* clear int stat */
- bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
+ write_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
/* Set Transmit device address */
- bfin_write_TWI_MASTER_ADDR(addr);
+ write_MASTER_ADDR(addr);
SSYNC();
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
@@ -468,60 +495,61 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
- bfin_write_TWI_XMT_DATA8(iface->command);
- bfin_write_TWI_INT_MASK(MCOMP | MERR |
+ write_XMT_DATA8(iface->command);
+ write_INT_MASK(MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
SSYNC();
if (iface->writeNum + 1 <= 255)
- bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
+ write_MASTER_CTL((iface->writeNum + 1) << 6);
else {
- bfin_write_TWI_MASTER_CTL(0xff << 6);
+ write_MASTER_CTL(0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ write_MASTER_CTL(read_MASTER_CTL() | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
case TWI_I2C_MODE_COMBINED:
- bfin_write_TWI_XMT_DATA8(iface->command);
- bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
+ write_XMT_DATA8(iface->command);
+ write_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
SSYNC();
if (iface->writeNum > 0)
- bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
+ write_MASTER_CTL((iface->writeNum + 1) << 6);
else
- bfin_write_TWI_MASTER_CTL(0x1 << 6);
+ write_MASTER_CTL(0x1 << 6);
/* Master enable */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ write_MASTER_CTL(read_MASTER_CTL() | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
- bfin_write_TWI_MASTER_CTL(0);
+ write_MASTER_CTL(0);
if (size != I2C_SMBUS_QUICK) {
/* Don't access xmit data register when this is a
* read operation.
*/
if (iface->read_write != I2C_SMBUS_READ) {
if (iface->writeNum > 0) {
- bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
+ write_XMT_DATA8(*(iface->transPtr++));
if (iface->writeNum <= 255)
- bfin_write_TWI_MASTER_CTL(iface->writeNum << 6);
+ write_MASTER_CTL(iface->writeNum
+ << 6);
else {
- bfin_write_TWI_MASTER_CTL(0xff << 6);
+ write_MASTER_CTL(0xff << 6);
iface->manual_stop = 1;
}
iface->writeNum--;
} else {
- bfin_write_TWI_XMT_DATA8(iface->command);
- bfin_write_TWI_MASTER_CTL(1 << 6);
+ write_XMT_DATA8(iface->command);
+ write_MASTER_CTL(1 << 6);
}
} else {
if (iface->readNum > 0 && iface->readNum <= 255)
- bfin_write_TWI_MASTER_CTL(iface->readNum << 6);
+ write_MASTER_CTL(iface->readNum << 6);
else if (iface->readNum > 255) {
- bfin_write_TWI_MASTER_CTL(0xff << 6);
+ write_MASTER_CTL(0xff << 6);
iface->manual_stop = 1;
} else {
del_timer(&iface->timeout_timer);
@@ -529,13 +557,13 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
}
}
}
- bfin_write_TWI_INT_MASK(MCOMP | MERR |
+ write_INT_MASK(MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
SSYNC();
/* Master enable */
- bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
+ write_MASTER_CTL(read_MASTER_CTL() | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
break;
@@ -576,7 +604,7 @@ static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
/* Disable TWI */
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA);
+ write_CONTROL(read_CONTROL() & ~TWI_ENA);
SSYNC();
return 0;
@@ -587,62 +615,104 @@ static int i2c_bfin_twi_resume(struct platform_device *dev)
/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
/* Enable TWI */
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+ write_CONTROL(read_CONTROL() | TWI_ENA);
SSYNC();
return 0;
}
-static int i2c_bfin_twi_probe(struct platform_device *dev)
+static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
- struct bfin_twi_iface *iface = &twi_iface;
+ struct bfin_twi_iface *iface;
struct i2c_adapter *p_adap;
+ struct resource *res;
int rc;
+ iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
+ if (!iface) {
+ dev_err(&(pdev->dev), "Cannot allocate memory\n");
+ rc = -ENOMEM;
+ goto out_error_nomem;
+ }
+
mutex_init(&(iface->twi_lock));
spin_lock_init(&(iface->lock));
init_completion(&(iface->complete));
- iface->irq = IRQ_TWI;
+
+ /* Find and map our resources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&(pdev->dev), "Cannot get IORESOURCE_MEM\n");
+ rc = -ENOENT;
+ goto out_error_get_res;
+ }
+
+ twi_regs_base = (u32) ioremap(res->start, (res->end - res->start)+1);
+ if (!twi_regs_base) {
+ dev_err(&(pdev->dev), "Cannot map IO\n");
+ rc = -ENXIO;
+ goto out_error_ioremap;
+ }
+
+ iface->irq = platform_get_irq(pdev, 0);
+ if (iface->irq < 0) {
+ dev_err(&(pdev->dev), "No DMA channel specified\n");
+ rc = -ENOENT;
+ goto out_error_no_irq;
+ }
init_timer(&(iface->timeout_timer));
iface->timeout_timer.function = bfin_twi_timeout;
iface->timeout_timer.data = (unsigned long)iface;
- p_adap = &iface->adap;
- p_adap->id = I2C_HW_BLACKFIN;
- strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
+ p_adap = &(iface->adap);
+ p_adap->id = I2C_HW_B_BLACKFIN;
+ strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
p_adap->class = I2C_CLASS_ALL;
- p_adap->dev.parent = &dev->dev;
+ p_adap->dev.parent = &pdev->dev;
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- IRQF_DISABLED, dev->name, iface);
+ SA_INTERRUPT, pdev->name, iface);
if (rc) {
- dev_err(&(p_adap->dev), "i2c-bfin-twi: can't get IRQ %d !\n",
+ dev_err(&(pdev->dev), "i2c-bfin-twi: can't get IRQ %d !\n",
iface->irq);
- return -ENODEV;
+ rc = -ENODEV;
+ goto out_error_req_irq;
}
/* Set TWI internal clock as 10MHz */
- bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
+ write_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
/* Set Twi interface clock as specified */
- bfin_write_TWI_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
+ write_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
<< 8) | (( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
& 0xFF));
/* Enable TWI */
- bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
+ write_CONTROL(read_CONTROL() | TWI_ENA);
SSYNC();
rc = i2c_add_adapter(p_adap);
if (rc < 0)
free_irq(iface->irq, iface);
else
- platform_set_drvdata(dev, iface);
+ platform_set_drvdata(pdev, iface);
+
+ dev_info(&(pdev->dev), "Blackfin I2C TWI driver, regs_base @ 0x%08x\n",
+ twi_regs_base);
return rc;
+
+out_error_req_irq:
+out_error_no_irq:
+ iounmap((void *)twi_regs_base);
+out_error_ioremap:
+out_error_get_res:
+ kfree(iface);
+out_error_nomem:
+ return rc;
}
static int i2c_bfin_twi_remove(struct platform_device *pdev)
@@ -670,8 +740,6 @@ static struct platform_driver i2c_bfin_twi_driver = {
static int __init i2c_bfin_twi_init(void)
{
- pr_info("I2C: Blackfin I2C TWI driver\n");
-
return platform_driver_register(&i2c_bfin_twi_driver);
}
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index aefab3f..19ddcd8 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -244,39 +244,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
-#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV)
-#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val)
-#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL)
-#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val)
-#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL)
-#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
-#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT)
-#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
-#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR)
-#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
-#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL)
-#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val)
-#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT)
-#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
-#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR)
-#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
-#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT)
-#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val)
-#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK)
-#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val)
-#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL)
-#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val)
-#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT)
-#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
-#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8)
-#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
-#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16)
-#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
-#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8)
-#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
-#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
-#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
-
/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
/* SPORT1 Registers */
--
1.5.3.4
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
