Re: libata not working for sis5533

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Chuck Ebbert ha scritto:
> On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
>   
>> Patrizio Bassi ha scritto:
>>     
>>> Michal Piotrowski ha scritto:
>>>       
>>>> Hi,
>>>>
>>>> [Adding IDE wizards to CC]
>>>>
>>>> On 26/08/07, Patrizio Bassi <[email protected]> wrote:
>>>>   
>>>>         
>>>>> My sis630 chipset shipped with Asus A1000
>>>>> doesn't work properly with suspend with ide drivers
>>>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>>>
>>>>> i tried to switch to libata but i cannot boot.
>>>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>>>> course scsi too.
>>>>>
>>>>> when i boot i get: irq #14 nobody cared and stop
>>>>>
>>>>> i have to remove battery to reboot pc.
>>>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>>>
>>>>> Patrizio
>>>>>
>>>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>>>> the laptop and could not boot it
>>>>>
>>>>> Please CC me.
>>>>>
>>>>> lspci:
>>>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>>>> Bridge)
>>>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>>>> PCI Fast Ethernet (rev 80)
>>>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB  1.0
>>>>> Controller (rev 07)
>>>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>>> Controller (rev 07)
>>>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>>>> SiS PCI Audio Accelerator (rev 01)
>>>>>  00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>>> Controller (rev a0)
>>>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>>>> PCI-to-PCI bridge (AGP)
>>>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>>>     
>>>>>           
>>>> Regards,
>>>> Michal
>>>>
>>>>   
>>>>         
>> i've been out for a week, but found no notice, did i lost any email or
>> no activity on this issue?
>>
>>     
>
> I assume you tried the standard workarounds, like
>
>   pci=nommconf,nomsi
>   pci=noacpi
>   pci=biosirq
>
> (one at at time, not all at once.)
>
>
>   

I waited 2.6.23 to be out and tried again, but still no chance to get
libata working for my notebook.

Anything i can try?

---
Patrizio Bassi
www.patriziobassi.it
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux