From: James Bottomley <[email protected]>
commit 2302827c95fe0f441025acd5133e532d2eef322b from upstream
Domain Validation in the SPI transport class is failing on boxes with
damaged cables (and failing to the extent that the box hangs). The
problem is that the first test it does is a cable integrity test for
wide transfers and if this fails, it turns the wide bit off. The
problem is that the next set of tests it does turns wide back on
again, with the result that it runs through the entirety of DV with a
known bad setting and then hangs the system.
The attached patch fixes the problem by physically nailing the wide
setting to what it deduces it should be for the whole of Domain
Validation.
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_transport_spi.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_devic
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
+ int min_period = spi_min_period(starget);
+ int max_width = spi_max_width(starget);
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
-
+
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
@@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_devic
return;
}
+ if (!scsi_device_wide(sdev)) {
+ spi_max_width(starget) = 0;
+ max_width = 0;
+ }
+
/* test width */
- if (i->f->set_width && spi_max_width(starget) &&
- scsi_device_wide(sdev)) {
+ if (i->f->set_width && max_width) {
i->f->set_width(starget, 1);
if (spi_dv_device_compare_inquiry(sdev, buffer,
@@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_devic
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
+ /* Make sure we don't force wide back on by asking
+ * for a transfer period that requires it */
+ max_width = 0;
+ if (min_period < 10)
+ min_period = 10;
}
}
@@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_devic
/* now set up to the maximum */
DV_SET(offset, spi_max_offset(starget));
- DV_SET(period, spi_min_period(starget));
+ DV_SET(period, min_period);
+
/* try QAS requests; this should be harmless to set if the
* target supports it */
if (scsi_device_qas(sdev)) {
@@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_devic
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
+ if (scsi_device_ius(sdev) && min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
- if (spi_min_period(starget) == 8)
+ if (min_period == 8)
DV_SET(pcomp_en, 1);
} else {
DV_SET(iu, 0);
@@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_devic
} else {
DV_SET(dt, 1);
}
+ /* set width last because it will pull all the other
+ * parameters down to required values */
+ DV_SET(width, max_width);
+
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
