Hello, When I run 'halt' the kernel prints: Halting. Shutdown: hdc ACPI: PCI interrupt for device 0000:01:05.0 disabled ACPI: PCI interrupt for device 0000:01:04.0 disabled ACPI: PCI interrupt for device 0000:01:03.0 disabled ACPI: PCI interrupt for device 0000:01:02.0 disabled Power down. acpi_power_off calledBut the system does not shut down. (The fans keep spinning, the LEDs keep shining, the LCD keeps displaying.) Basically, the motherboard is still providing power to every component, as if the power supply had refused to stop.
Kernel is 2.6.22.1-rt9 I followed the instructions given here: http://bugzilla.kernel.org/show_bug.cgi?id=6431 # cat /sys/module/acpi/parameters/debug_layer Description Hex SET ACPI_UTILITIES 0x00000001 [*] ACPI_HARDWARE 0x00000002 [*] ACPI_EVENTS 0x00000004 [*] ACPI_TABLES 0x00000008 [*] ACPI_NAMESPACE 0x00000010 [*] ACPI_PARSER 0x00000020 [*] ACPI_DISPATCHER 0x00000040 [*] ACPI_EXECUTER 0x00000080 [*] ACPI_RESOURCES 0x00000100 [*] ACPI_CA_DEBUGGER 0x00000200 [*] ACPI_OS_SERVICES 0x00000400 [*] ACPI_CA_DISASSEMBLER 0x00000800 [*] ACPI_COMPILER 0x00001000 [*] ACPI_TOOLS 0x00002000 [*] ACPI_ALL_DRIVERS 0xFFFF0000 [*] -- debug_layer = 0xFFFF3FFF ( * = enabled) # cat /sys/module/acpi/parameters/debug_level Description Hex SET ACPI_LV_ERROR 0x00000001 [*] ACPI_LV_WARN 0x00000002 [*] ACPI_LV_INIT 0x00000004 [*] ACPI_LV_DEBUG_OBJECT 0x00000008 [*] ACPI_LV_INFO 0x00000010 [*] ACPI_LV_INIT_NAMES 0x00000020 [*] ACPI_LV_PARSE 0x00000040 [*] ACPI_LV_LOAD 0x00000080 [*] ACPI_LV_DISPATCH 0x00000100 [*] ACPI_LV_EXEC 0x00000200 [*] ACPI_LV_NAMES 0x00000400 [*] ACPI_LV_OPREGION 0x00000800 [*] ACPI_LV_BFIELD 0x00001000 [*] ACPI_LV_TABLES 0x00002000 [*] ACPI_LV_VALUES 0x00004000 [*] ACPI_LV_OBJECTS 0x00008000 [*] ACPI_LV_RESOURCES 0x00010000 [*] ACPI_LV_USER_REQUESTS 0x00020000 [*] ACPI_LV_PACKAGE 0x00040000 [*] ACPI_LV_ALLOCATIONS 0x00100000 [*] ACPI_LV_FUNCTIONS 0x00200000 [*] ACPI_LV_OPTIMIZATIONS 0x00400000 [*] ACPI_LV_MUTEX 0x01000000 [*] ACPI_LV_THREADS 0x02000000 [*] ACPI_LV_IO 0x04000000 [*] ACPI_LV_INTERRUPTS 0x08000000 [*] ACPI_LV_AML_DISASSEMBLE 0x10000000 [*] ACPI_LV_VERBOSE_INFO 0x20000000 [*] ACPI_LV_FULL_TABLES 0x40000000 [*] ACPI_LV_EVENTS 0x80000000 [*] -- debug_level = 0xFFFFFFFF (* = enabled) I've attached my .config and the output of the following commands: dmesg, lspci, acpidump, halt Do you have any idea what the problem is? Regards.
Linux version 2.6.22.1-rt9 (root@venus) (gcc version 3.4.6) #2 PREEMPT RT Mon Oct 8 17:27:02 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
found SMP MP-table at 000f4fa0
Entering add_active_range(0, 0, 65264) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65264
early_node_map[1] active PFN ranges
0: 0 -> 65264
On node 0 totalpages: 65264
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 477 pages used for memmap
Normal zone: 60691 pages, LIFO batch:15
DMI 2.2 present.
ACPI: RSDP 000F6850, 0014 (r0 IntelR)
ACPI: RSDT 0FEF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 0FEF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 0FEF30C0, 39B3 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 0FEF0000, 0040
ACPI: APIC 0FEF6A80, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0ff00000:eed00000)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists. Total pages: 64755
Kernel command line: ro root=/dev/hdc1 console=ttyS0,57600n8 console=tty0 panic=3 apic=debug acpi_pm_good
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2400.000 MHz processor.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255916k/261056k available (1513k kernel code, 4644k reserved, 560k data, 148k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
vmalloc : 0xd0800000 - 0xfffb5000 ( 759 MB)
lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB)
.init : 0xc030a000 - 0xc032f000 ( 148 kB)
.data : 0xc027a641 - 0xc030692c ( 560 kB)
.text : 0xc0100000 - 0xc027a641 (1513 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4802.77 BogoMIPS (lpj=24013893)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 483 Objects with 44 Devices 132 Methods 29 Regions
tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
Getting VERSION: 50014
Getting VERSION: 50014
Getting ID: 0
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 833376
... PM timer delta = 357961
... PM timer result ok
..... delta 833376
..... mult: 35793226
..... calibration result: 1333401
..... CPU clock speed is 2400.1280 MHz.
..... host bus clock speed is 133.3401 MHz.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 1 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:...................................................................
Initialized 29/29 Regions 9/9 Fields 19/19 Buffers 10/13 Packages (492 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 49 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set PCI routing entry (2-6 -> 0x59 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set PCI routing entry (2-4 -> 0x49 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set PCI routing entry (2-3 -> 0x41 -> IRQ 3 Mode:0 Active:0)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 1 0 0 0 0 1 1 41
04 001 01 1 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 1 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 1 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 1 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
pnp: 00:0b: iomem range 0xcb000-0xcbfff has been reserved
pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: 10000000-100fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 6, 294912 bytes)
TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
io scheduler noop registered (default)
Boot video device is 0000:00:02.0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:01:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:ab:14:32:31
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 17
e1000: 0000:01:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:ab:14:32:32
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 18 (level, low) -> IRQ 18
e1000: 0000:01:04.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:ab:14:32:33
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 19
e1000: 0000:01:05.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:ab:14:32:34
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: PQI IDE DiskOnModule, ATA DISK drive
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0x04 { DriveStatusError }
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 256000 sectors (131 MB) w/1KiB Cache, CHS=500/16/32
hdc: hdc1 hdc2 hdc3 hdc4
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
Using IPI Shortcut mode
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 148k freed
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) (prog-if 00 [VGA]) Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 7 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: 10000000-100fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Unknown device 24c2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f000 [size=16] Region 5: Memory at 10100000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) Subsystem: Intel Corporation Unknown device 24c2 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0500 [size=32] 01:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Intel Corporation PRO/1000 MT Network Connection Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ed000000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at ed080000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c000 [size=64] [virtual] Expansion ROM at 10000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 01:03.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Intel Corporation PRO/1000 MT Network Connection Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at ed020000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at ed0a0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c400 [size=64] [virtual] Expansion ROM at 10010000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 01:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Intel Corporation PRO/1000 MT Network Connection Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at ed040000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at ed090000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c800 [size=64] [virtual] Expansion ROM at 10020000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 01:05.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Intel Corporation PRO/1000 MT Network Connection Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ed060000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at ed0b0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at cc00 [size=64] [virtual] Expansion ROM at 10030000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 01:0f.0 Multimedia video controller: DekTec Digital Video B.V. DTA-105 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 11750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at ed0c0000 (32-bit, non-prefetchable) [size=2K]
Attachment:
acpidump.txt.bz2
Description: Binary data
Attachment:
halt.txt.bz2
Description: Binary data
Attachment:
config-2.6.22.1-rt9.bz2
Description: Binary data
- Follow-Ups:
- Re: halt does not shut the system down
- From: John Sigler <[email protected]>
- Re: halt does not shut the system down
- From: John Sigler <[email protected]>
- Re: halt does not shut the system down
- Prev by Date: Buffered filesystem AIO status?
- Next by Date: Re: [PATCH for testing] Re: Decreasing stime running confuses top
- Previous by thread: Buffered filesystem AIO status?
- Next by thread: Re: halt does not shut the system down
- Index(es):
 |