2.6.23-rc8-mm2 ACPI Battery Info in /sys but not /proc/acpi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have these directories in /proc:
/proc/acpi
/proc/acpi/thermal_zone
/proc/acpi/thermal_zone/THRM
/proc/acpi/processor
/proc/acpi/processor/CPU0
/proc/acpi/video
/proc/acpi/video/VGA
/proc/acpi/video/VGA/TV
/proc/acpi/video/VGA/LCD
/proc/acpi/video/VGA/CRT
/proc/acpi/fan
/proc/acpi/button
/proc/acpi/button/lid
/proc/acpi/button/lid/LID
/proc/acpi/button/power
/proc/acpi/button/power/PWRB
/proc/acpi/button/power/PWRF
/proc/acpi/ac_adapter
/proc/acpi/ac_adapter/ACAD
/proc/acpi/power_resource
/proc/acpi/embedded_controller
/proc/acpi/embedded_controller/EC0

but not the battery information.
In /sys I have:
/sys/class/power_supply/BAT1
which is a link to:
../../devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/PNP0C0A:00/power_supply/BAT1
and *that* directory contains all the battery information.

This is causing all sorts of problems for me.  If I disconnect the AC
power from the laptop, the scripts immediately send it into hibernate
mode because battery level is not found / 0%.  None of my monitoring
tools can report estimated run-time.  Etc, etc.

Here is the .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc8-mm2
# Thu Oct  4 20:44:27 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_NONIRQ_WAKEUP=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/initramfs"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_KPAGEMAP=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_NR_CPUS=8
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_PM_TRACE is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_DMAR is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_LOWTX_FRAME_DUMP=y
CONFIG_TKIP_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_FIXED_PHY is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m

#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_WATCHDOG is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=1

#
# SPI devices
#

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_GOTEMP=m

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_PASSWORDS is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m

#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_KGDB is not set
# CONFIG_KGDB_ATTACH_WAIT is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Here is dmesg:
Linux version 2.6.23-rc8-mm2 (root@zephyr) (gcc version 4.2.0 (Gentoo 4.2.0)) #4 SMP Thu Oct 4 20:45:26 MDT 2007
Command line: root=/dev/sda2 rootfstype=reiser4 rootflags=no_write_barrier,tmgr.atom_max_size=8000 ro i8042.nomux elevator=cfq resume=/dev/sda3 panic=5 nmi_watchdog=0,panic debug kernelcore=384M
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
 BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data)
 BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS)
 BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262000) 1 entries of 256 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F7240, 0014 (r0 PTLTD )
ACPI: RSDT 3FF7A87E, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP 3FF7EE13, 0074 (r1 NVIDIA CK8       6040000 PTL_    F4240)
ACPI: DSDT 3FF7A8B2, 4561 (r1 NVIDIA      CK8  6040000 MSFT  100000E)
ACPI: FACS 3FF7FFC0, 0040
ACPI: APIC 3FF7EE87, 005A (r1 NVIDIA NV_APIC_  6040000  LTP        0)
ACPI: BOOT 3FF7EEE1, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 3FF7EF09, 00F7 (r1 PTLTD  POWERNOW  6040000  LTP        1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262000) 1 entries of 256 used
No mptable found.
sizeof(struct page) = 88
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
  Node 0: 99328
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   262000
On node 0 totalpages: 261903
Node 0 memmap at 0xffff810001000000 size 23068672 first pfn 0xffff810001000000
  DMA zone: 88 pages used for memmap
  DMA zone: 2648 pages reserved
  DMA zone: 1263 pages, LIFO batch:0
  DMA32 zone: 2046 pages used for memmap
  DMA32 zone: 93186 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 3494 pages used for memmap
  Movable zone: 159178 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34848 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 253627
Kernel command line: root=/dev/sda2 rootfstype=reiser4 rootflags=no_write_barrier,tmgr.atom_max_size=8000 ro i8042.nomux elevator=cfq resume=/dev/sda3 panic=5 nmi_watchdog=0,panic debug kernelcore=384M
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 797.941 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1648 kB
 per task-struct memory footprint: 1680 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ e8000000 size 128 MB
Memory: 1012496k/1048000k available (3332k kernel code, 34844k reserved, 1599k data, 1112k init)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=16, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1597.30 BogoMIPS (lpj=798654)
kswapd reclaim order set to 3
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 26k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 650 Objects with 66 Devices 205 Methods 24 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12467832
Detected 12.467 MHz APIC timer.
Brought up 1 CPUs
net_namespace: 136 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:....................................................................
Initialized 24/24 Regions 2/2 Fields 28/29 Buffers 14/21 Packages (662 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xe8000000
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x8000-0x807f has been reserved
pnp: 00:01: ioport range 0x8080-0x80ff has been reserved
pnp: 00:01: ioport range 0x8400-0x847f has been reserved
pnp: 00:01: ioport range 0x8480-0x84ff has been reserved
pnp: 00:01: ioport range 0x8800-0x887f has been reserved
pnp: 00:01: ioport range 0x8880-0x88ff has been reserved
pnp: 00:01: ioport range 0x2040-0x207f has been reserved
pnp: 00:01: ioport range 0x2000-0x203f has been reserved
pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:02: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:02: iomem range 0xfed00000-0xfed00fff has been reserved
PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.0
PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.1
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 50000000-53ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
  IO window: 00003800-000038ff
  IO window: 00003c00-00003cff
  PREFETCH window: 54000000-57ffffff
PCI: Bridge: 0000:00:0a.0
  IO window: 3000-7fff
  MEM window: e0100000-e17fffff
  PREFETCH window: 50000000-57ffffff
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: e2000000-e2ffffff
  PREFETCH window: f0000000-f80fffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
audit(1191556564.825:1): initialized
Total HugeTLB memory allocated, 0
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input2
ACPI: Lid Switch [LID]
input: Video Bus as /devices/virtual/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
Marking TSC unstable due to possible TSC halt in C2
Time: acpi_pm clocksource has been installed.
ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
ACPI: Thermal Zone [THRM] (33 C)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
loop: module loaded
Marvell 88E1101: Registered new driver
Marvell 88E1112: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
Davicom DM9161E: Registered new driver
Davicom DM9161A: Registered new driver
Davicom DM9131: Registered new driver
Cicada Cis8204: Registered new driver
Cicada Cis8201: Registered new driver
LXT970: Registered new driver
LXT971: Registered new driver
QS6612: Registered new driver
SMSC LAN83C185: Registered new driver
Vitesse VSC8244: Registered new driver
Broadcom BCM5411: Registered new driver
Broadcom BCM5421: Registered new driver
Broadcom BCM5461: Registered new driver
ICPlus IP175C: Registered new driver
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc2000001c800, 00:0f:b0:07:dc:49, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8101'
pata_amd 0000:00:08.0: version 0.3.9
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15
ata1: ACPI get timing mode failed (AE 0x1001)
ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata2: ACPI get timing mode failed (AE 0x1001)
ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.19, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9AT00  MCZO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+RW GCA-4040N 1.19 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d]
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 50000000-53ffffff
  MEM window: e0400000-e07fffff
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
Socket status: 30000086
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x12
swsusp: Resume From Partition /dev/sda3
PM: Checking swsusp image.
PM: Resume from disk failed.
registered taskstats version 1
Freeing unused kernel memory: 1112k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
reiser4: sda2: found disk format 4.0.0.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
AC'97 0 analog subsections not ready
input: PS/2 Mouse as /devices/virtual/input/input5
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
intel8x0_measure_ac97_clock: measured 50370 usecs
intel8x0: measured clock 635 rejected
intel8x0: clocking to 48000
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 
ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: supports USB remote wakeup
ehci_hcd 0000:00:02.2: irq 21, io mem 0xe0004000
ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.23-rc8-mm2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
PCI: Enabling device 0000:00:02.0 (0004 -> 0006)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: USB HC TakeOver from BIOS/SMM
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: irq 20, io mem 0xe0000000
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0003
ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
PCI: Enabling device 0000:00:02.1 (0004 -> 0006)
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: USB HC TakeOver from BIOS/SMM
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
ohci_hcd 0000:00:02.1: created debug files
ohci_hcd 0000:00:02.1: irq 22, io mem 0xe0001000
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0003
ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 17
ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor 0x4243)
ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00, vendor 0x4243)
ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x02, vendor 0x4243)
ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x03, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
ohci_hcd 0000:00:02.0: auto-stop root hub
ohci_hcd 0000:00:02.1: auto-stop root hub
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:02.2: suspend root hub
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ohci_hcd 0000:00:02.1: suspend root hub
NET: Registered protocol family 10
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
Adding 2843496k swap on /dev/sda3.  Priority:100 extents:1 across:2843496k

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.23-rc8-mm2 #4
-------------------------------------------------------
echo/4502 is trying to acquire lock:
 (pm_mutex){--..}, at: [<ffffffff80270a52>] hibernate+0x12/0x1f0

but task is already holding lock:
 (&buffer->mutex){--..}, at: [<ffffffff802fec68>] sysfs_write_file+0x48/0x160

which lock already depends on the new lock.


the existing dependency chain (in reverse order) is:

-> #1 (&buffer->mutex){--..}:
       [<ffffffff80264eab>] __lock_acquire+0xc8b/0x1180
       [<ffffffff802653f3>] lock_acquire+0x53/0x70
       [<ffffffff802fedc6>] sysfs_read_file+0x46/0x150
       [<ffffffff80538db0>] __mutex_lock_slowpath+0x80/0x2c0
       [<ffffffff802fedc6>] sysfs_read_file+0x46/0x150
       [<ffffffff802b2005>] vfs_read+0xc5/0x180
       [<ffffffff802b2503>] sys_read+0x53/0x90
       [<ffffffff80209185>] try_name+0x75/0x210
       [<ffffffff802cc17e>] sys_mount+0xce/0x100
       [<ffffffff80538ebb>] __mutex_lock_slowpath+0x18b/0x2c0
       [<ffffffff8020956d>] name_to_dev_t+0x24d/0x2a0
       [<ffffffff80263c71>] trace_hardirqs_on+0xc1/0x160
       [<ffffffff80270598>] software_resume+0x38/0x1a0
       [<ffffffff806fe71b>] kernel_init+0x15b/0x340
       [<ffffffff8053a3bc>] trace_hardirqs_on_thunk+0x35/0x37
       [<ffffffff80263c71>] trace_hardirqs_on+0xc1/0x160
       [<ffffffff8020d228>] child_rip+0xa/0x12
       [<ffffffff8020c93c>] restore_args+0x0/0x30
       [<ffffffff803f0fe0>] vgacon_cursor+0x0/0x1f0
       [<ffffffff8023f8bb>] release_console_sem+0x4b/0x230
       [<ffffffff806fe5c0>] kernel_init+0x0/0x340
       [<ffffffff8020d21e>] child_rip+0x0/0x12
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #0 (pm_mutex){--..}:
       [<ffffffff80263098>] print_circular_bug_header+0xe8/0xf0
       [<ffffffff80264ce0>] __lock_acquire+0xac0/0x1180
       [<ffffffff802653f3>] lock_acquire+0x53/0x70
       [<ffffffff80270a52>] hibernate+0x12/0x1f0
       [<ffffffff80538db0>] __mutex_lock_slowpath+0x80/0x2c0
       [<ffffffff80270a52>] hibernate+0x12/0x1f0
       [<ffffffff8026f3b0>] state_store+0xe0/0xf0
       [<ffffffff802fed1e>] sysfs_write_file+0xfe/0x160
       [<ffffffff802b1e88>] vfs_write+0xc8/0x180
       [<ffffffff802b2593>] sys_write+0x53/0x90
       [<ffffffff8020c39e>] system_call+0x7e/0x83
       [<ffffffffffffffff>] 0xffffffffffffffff

other info that might help us debug this:

1 lock held by echo/4502:
 #0:  (&buffer->mutex){--..}, at: [<ffffffff802fec68>] sysfs_write_file+0x48/0x160

stack backtrace:

Call Trace:
 [<ffffffff80262be3>] print_circular_bug_tail+0x83/0x90
 [<ffffffff80263098>] print_circular_bug_header+0xe8/0xf0
 [<ffffffff80264ce0>] __lock_acquire+0xac0/0x1180
 [<ffffffff802653f3>] lock_acquire+0x53/0x70
 [<ffffffff80270a52>] hibernate+0x12/0x1f0
 [<ffffffff80538db0>] __mutex_lock_slowpath+0x80/0x2c0
 [<ffffffff80270a52>] hibernate+0x12/0x1f0
 [<ffffffff8026f3b0>] state_store+0xe0/0xf0
 [<ffffffff802fed1e>] sysfs_write_file+0xfe/0x160
 [<ffffffff802b1e88>] vfs_write+0xc8/0x180
 [<ffffffff802b2593>] sys_write+0x53/0x90
 [<ffffffff8020c39e>] system_call+0x7e/0x83

INFO: lockdep is turned off.
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Shrinking memory...  -done (0 pages freed)
Freed 0 kbytes in 0.07 seconds (0.00 MB/s)
Suspending console(s)
Suspending device vcsa1
Suspending device vcs1
Suspending device event6
Suspending device event5
Suspending device event4
Suspending device event3
Suspending device event2
Suspending device event1
Suspending device event0
Suspending device ssb0:2
Suspending device ssb0:1
Suspending device ssb0:0
Suspending device usbdev3.1_ep81
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device controlC0
Suspending device 0-0:AD1981B
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device pcmC0D1c
Suspending device pcmC0D2p
Suspending device card0
Suspending device mouse1
Suspending device input6
Suspending device mouse0
Suspending device input5
Suspending device timer
Suspending device input4
Suspending device serio1
Suspending device psaux
Suspending device serio0
Suspending device mice
Suspending device i8042
Suspending device pcmcia_socket1
Suspending device pcmcia_socket0
Suspending device 1:0:0:0
Suspending device target1:0:0
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device eth0
Suspending device hpet
Suspending device rtc
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device input3
Suspending device acpi_video2
Suspending device acpi_video1
Suspending device acpi_video0
Suspending device input2
Suspending device input1
Suspending device input0
Suspending device BAT1
Suspending device ACAD
Suspending device snapshot
Suspending device pcspkr
Suspending device cpu0
Suspending device msr0
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device agpgart
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:01:00.0
Suspending device 0000:02:04.2
Suspending device 0000:02:04.1
Suspending device 0000:02:04.0
Suspending device 0000:02:02.0
ACPI: PCI interrupt for device 0000:02:02.0 disabled
Suspending device 0000:02:01.0
Suspending device 0000:02:00.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:0b.0
Suspending device 0000:00:0a.0
Suspending device 0000:00:08.0
Suspending device 0000:00:06.1
Suspending device 0000:00:06.0
codec_write 0: semaphore is not ready for register 0x26
codec_write 0: semaphore is not ready for register 0x26
ACPI: PCI interrupt for device 0000:00:06.0 disabled
Suspending device 0000:00:02.2
ACPI: PCI interrupt for device 0000:00:02.2 disabled
ehci_hcd 0000:00:02.2: --> PCI D3/wakeup
Suspending device 0000:00:02.1
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ohci_hcd 0000:00:02.1: --> PCI D3/wakeup
Suspending device 0000:00:02.0
ACPI: PCI interrupt for device 0000:00:02.0 disabled
ohci_hcd 0000:00:02.0: --> PCI D3/wakeup
Suspending device 0000:00:01.1
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device pci0000:00
Suspending device LNXTHERM:01
Suspending device LNXTHERM:00
Suspending device PNP0C0F:0d
Suspending device PNP0C0F:0c
Suspending device PNP0C0F:0b
Suspending device PNP0C0F:0a
Suspending device PNP0C0F:09
Suspending device PNP0C0F:08
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device LNXVIDEO:00
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device PNP0401:00
Suspending device PNP0700:00
Suspending device PNP0A05:00
Suspending device PNP0F13:00
Suspending device PNP0303:00
Suspending device PNP0C04:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0000:00
Suspending device PNP0C02:01
Suspending device PNP0C0A:00
Suspending device PNP0C09:00
Suspending device PNP0C01:00
Suspending device PNP0C02:00
Suspending device ACPI0003:00
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device device:0f
Suspending device device:0e
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C0D:00
Suspending device PNP0C0C:00
Suspending device pnp0c14:00
Suspending device device:00
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
swsusp: critical section: 
swsusp: Need to copy 22901 pages
swsusp: Normal pages needed: 22901 + 1024 + 24, available pages: 238995
evxfevnt-0079 [00] enable                : System is already in ACPI mode
agpgart: Setting up Nforce3 AGP.
ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b00007, writing b00006)
ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b00007, writing b00006)
ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: lost power, restarting
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 64 is not supported by device 0000:00:02.2
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b00007, writing b00003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:08.0 at offset 1 (was b00001, writing b00005)
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 17
ata1: ACPI get timing mode failed (AE 0x1001)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
pnp: Failed to activate device 00:08.
pnp: Failed to activate device 00:09.
sd 0:0:0:0: [sda] Starting disk
ata2: ACPI get timing mode failed (AE 0x1001)
ata2.00: configured for MWDMA2
usb usb1: usb resume
ehci_hcd 0000:00:02.2: resume root hub after power loss
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
ohci_hcd 0000:00:02.0: lost power
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0003
ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: restart complete
usb usb2: root hub lost power or was reset
hub 2-0:1.0: trying to enable port power on non-switchable hub
usb usb3: usb resume
ohci_hcd 0000:00:02.1: lost power
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0003
ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.1: restart complete
usb usb3: root hub lost power or was reset
hub 3-0:1.0: trying to enable port power on non-switchable hub
PM: Image restored successfully.
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
done.
swsusp: Basic memory bitmaps freed
ohci_hcd 0000:00:02.0: auto-stop root hub
ohci_hcd 0000:00:02.1: auto-stop root hub
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:02.2: suspend root hub
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ohci_hcd 0000:00:02.1: suspend root hub
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
netconsole: Unknown symbol config_group_init
netconsole: Unknown symbol config_item_get
netconsole: Unknown symbol configfs_unregister_subsystem
netconsole: Unknown symbol configfs_register_subsystem
netconsole: Unknown symbol config_item_init_type_name
netconsole: Unknown symbol config_item_put
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Hangcheck: hangcheck value past margin!
usb usb1: usb resume
ehci_hcd 0000:00:02.2: resume root hub
hub 1-0:1.0: hub_resume
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 1 high speed
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:02.2: port 1 high speed
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usb 1-1:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
usb 1-1: new device found, idVendor=0bc2, idProduct=0502
usb 1-1: new device strings: Mfr=5, Product=2, SerialNumber=1
usb 1-1: Product: ST94811U2-RK
usb 1-1: Manufacturer: Seagate
usb 1-1: SerialNumber: 33504D304C573434
libusual 1-1:1.0: usb_probe_interface
libusual 1-1:1.0: usb_probe_interface - got id
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     ST350064 1A               3.AA PQ: 0 ANSI: 0
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
vbetool[54306]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007fff8b1a95f0 error 4
Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s)
Suspending device 2:0:0:0
Suspending device target2:0:0
Suspending device host2
Suspending device usbdev1.2_ep82
Suspending device usbdev1.2_ep01
Suspending device 1-1:1.0
Suspending device usbdev1.2_ep00
Suspending device 1-1
usb 1-1: usb suspend
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcs4
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device adsp
Suspending device mixer
Suspending device vcsa1
Suspending device vcs1
Suspending device event6
Suspending device event5
Suspending device event4
Suspending device event3
Suspending device event2
Suspending device event1
Suspending device event0
Suspending device ssb0:2
Suspending device ssb0:1
Suspending device ssb0:0
Suspending device usbdev3.1_ep81
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend
ehci_hcd 0000:00:02.2: suspend root hub
Suspending device controlC0
Suspending device 0-0:AD1981B
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device pcmC0D1c
Suspending device pcmC0D2p
Suspending device card0
Suspending device mouse1
Suspending device input6
Suspending device mouse0
Suspending device input5
Suspending device timer
Suspending device input4
Suspending device serio1
Suspending device psaux
Suspending device serio0
Suspending device mice
Suspending device i8042
Suspending device pcmcia_socket1
Suspending device pcmcia_socket0
Suspending device 1:0:0:0
Suspending device target1:0:0
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device eth0
Suspending device hpet
Suspending device rtc
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device input3
Suspending device acpi_video2
Suspending device acpi_video1
Suspending device acpi_video0
Suspending device input2
Suspending device input1
Suspending device input0
Suspending device BAT1
Suspending device ACAD
Suspending device snapshot
Suspending device pcspkr
Suspending device cpu0
Suspending device msr0
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device agpgart
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:01:00.0
Suspending device 0000:02:04.2
Suspending device 0000:02:04.1
Suspending device 0000:02:04.0
Suspending device 0000:02:02.0
ACPI: PCI interrupt for device 0000:02:02.0 disabled
Suspending device 0000:02:01.0
Suspending device 0000:02:00.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:0b.0
Suspending device 0000:00:0a.0
Suspending device 0000:00:08.0
Suspending device 0000:00:06.1
Suspending device 0000:00:06.0
codec_write 0: semaphore is not ready for register 0x26
codec_write 0: semaphore is not ready for register 0x26
ACPI: PCI interrupt for device 0000:00:06.0 disabled
Suspending device 0000:00:02.2
ACPI: PCI interrupt for device 0000:00:02.2 disabled
ehci_hcd 0000:00:02.2: --> PCI D3/wakeup
Suspending device 0000:00:02.1
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ohci_hcd 0000:00:02.1: --> PCI D3/wakeup
Suspending device 0000:00:02.0
ACPI: PCI interrupt for device 0000:00:02.0 disabled
ohci_hcd 0000:00:02.0: --> PCI D3/wakeup
Suspending device 0000:00:01.1
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device pci0000:00
Suspending device LNXTHERM:01
Suspending device LNXTHERM:00
Suspending device PNP0C0F:0d
Suspending device PNP0C0F:0c
Suspending device PNP0C0F:0b
Suspending device PNP0C0F:0a
Suspending device PNP0C0F:09
Suspending device PNP0C0F:08
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device LNXVIDEO:00
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device PNP0401:00
Suspending device PNP0700:00
Suspending device PNP0A05:00
Suspending device PNP0F13:00
Suspending device PNP0303:00
Suspending device PNP0C04:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0000:00
Suspending device PNP0C02:01
Suspending device PNP0C0A:00
Suspending device PNP0C09:00
Suspending device PNP0C01:00
Suspending device PNP0C02:00
Suspending device ACPI0003:00
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device device:0f
Suspending device device:0e
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C0D:00
Suspending device PNP0C0C:00
Suspending device pnp0c14:00
Suspending device device:00
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
 hwsleep-0318 [00] enter_sleep_state     : Entering sleep state [S3]
Back to C!
WARNING: at arch/x86_64/kernel/smp.c:427 smp_call_function_single()

Call Trace:
 [<ffffffff8021ddf7>] smp_call_function_single+0xc7/0xd0
 [<ffffffff80215ff7>] sc_freq_event+0x87/0x90
 [<ffffffff8053d491>] notifier_call_chain+0x51/0x70
 [<ffffffff8025b5fd>] __srcu_notifier_call_chain+0x5d/0x90
 [<ffffffff80499789>] cpufreq_resume+0x109/0x110
 [<ffffffff804478e3>] __sysdev_resume+0x33/0x50
 [<ffffffff80447f78>] sysdev_resume+0x58/0x90
 [<ffffffff8044d739>] device_power_up+0x9/0x20
 [<ffffffff8026f0ed>] suspend_devices_and_enter+0xed/0x100
 [<ffffffff8026f298>] enter_state+0x198/0x1d0
 [<ffffffff8026f38a>] state_store+0xba/0xf0
 [<ffffffff802fed1e>] sysfs_write_file+0xfe/0x160
 [<ffffffff802b1e88>] vfs_write+0xc8/0x180
 [<ffffffff802b2593>] sys_write+0x53/0x90
 [<ffffffff8020c39e>] system_call+0x7e/0x83

INFO: lockdep is turned off.
agpgart: Setting up Nforce3 AGP.
ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b00007, writing b00006)
ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b00007, writing b00006)
ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b00007, writing b00003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:08.0 at offset b (was c8010de, writing c80f0de)
PCI: Setting latency timer of device 0000:00:08.0 to 64
PM: Writing back config space on device 0000:00:0a.0 at offset 9 (was fff0, writing 57f05000)
PM: Writing back config space on device 0000:00:0a.0 at offset 6 (was 80020200, writing 800a0200)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PM: Writing back config space on device 0000:00:0b.0 at offset 7 (was 22000f0, writing 222000f0)
PM: Writing back config space on device 0000:02:00.0 at offset f (was 4020100, writing 402010b)
PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 0, writing e0100000)
PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing e0108000)
PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2100000, writing 2100116)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing e0108800)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 1, writing 7001)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900107)
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:02:02.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, writing e0104000)
PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2, writing 106)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010b)
PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 34fc)
PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 3400)
PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 30fc)
PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 3000)
PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing e07ff000)
PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing e0400000)
PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 53fff000)
PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 50000000)
PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 40000000, writing b0060302)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824008, writing 82a810)
PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100107, writing 2100007)
PM: Writing back config space on device 0000:02:04.1 at offset f (was 34002ff, writing 5c0020a)
PM: Writing back config space on device 0000:02:04.1 at offset e (was 0, writing 3cfc)
PM: Writing back config space on device 0000:02:04.1 at offset d (was 0, writing 3c00)
PM: Writing back config space on device 0000:02:04.1 at offset c (was 0, writing 38fc)
PM: Writing back config space on device 0000:02:04.1 at offset b (was 0, writing 3800)
PM: Writing back config space on device 0000:02:04.1 at offset a (was 0, writing e0fff000)
PM: Writing back config space on device 0000:02:04.1 at offset 9 (was 0, writing e0c00000)
PM: Writing back config space on device 0000:02:04.1 at offset 8 (was 0, writing 57fff000)
PM: Writing back config space on device 0000:02:04.1 at offset 7 (was e1000000, writing 54000000)
PM: Writing back config space on device 0000:02:04.1 at offset 6 (was 40000000, writing b00a0702)
PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 824008, writing 82a810)
PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100103, writing 2100007)
ata1: ACPI get timing mode failed (AE 0x1001)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 1, writing 7401)
PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100107)
PM: Writing back config space on device 0000:01:00.0 at offset f (was 1050100, writing 105010b)
PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing f8000008)
PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing f0000008)
PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 0, writing e2000000)
PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b00000, writing 2b00007)
pnp: Failed to activate device 00:08.
pnp: Failed to activate device 00:09.
sd 0:0:0:0: [sda] Starting disk
ata2: ACPI get timing mode failed (AE 0x1001)
ata2.00: configured for MWDMA2
usb usb1: usb resume
ehci_hcd 0000:00:02.2: resume root hub
hub 1-0:1.0: hub_resume
usb usb2: usb resume
ohci_hcd 0000:00:02.0: resume root hub
hub 2-0:1.0: hub_resume
usb usb3: usb resume
ohci_hcd 0000:00:02.1: resume root hub
hub 3-0:1.0: hub_resume
usb 1-1: usb resume
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: finish resume
PM: Finishing wakeup.
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
done.
ohci_hcd 0000:00:02.0: auto-stop root hub
vbetool[54404]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007fffe53dbbb0 error 4
ohci_hcd 0000:00:02.1: auto-stop root hub
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ohci_hcd 0000:00:02.1: suspend root hub
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
vbetool[56692]: segfault at 00000000000080a0 rip 0000000000425b1b rsp 00007fff85079820 error 4
Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s)
Suspending device 2:0:0:0
Suspending device target2:0:0
Suspending device host2
Suspending device usbdev1.2_ep82
Suspending device usbdev1.2_ep01
Suspending device 1-1:1.0
Suspending device usbdev1.2_ep00
Suspending device 1-1
usb 1-1: usb suspend
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcs4
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device adsp
Suspending device mixer
Suspending device vcsa1
Suspending device vcs1
Suspending device event6
Suspending device event5
Suspending device event4
Suspending device event3
Suspending device event2
Suspending device event1
Suspending device event0
Suspending device ssb0:2
Suspending device ssb0:1
Suspending device ssb0:0
Suspending device usbdev3.1_ep81
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend
ehci_hcd 0000:00:02.2: suspend root hub
Suspending device controlC0
Suspending device 0-0:AD1981B
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device pcmC0D1c
Suspending device pcmC0D2p
Suspending device card0
Suspending device mouse1
Suspending device input6
Suspending device mouse0
Suspending device input5
Suspending device timer
Suspending device input4
Suspending device serio1
Suspending device psaux
Suspending device serio0
Suspending device mice
Suspending device i8042
Suspending device pcmcia_socket1
Suspending device pcmcia_socket0
Suspending device 1:0:0:0
Suspending device target1:0:0
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device eth0
Suspending device hpet
Suspending device rtc
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device input3
Suspending device acpi_video2
Suspending device acpi_video1
Suspending device acpi_video0
Suspending device input2
Suspending device input1
Suspending device input0
Suspending device BAT1
Suspending device ACAD
Suspending device snapshot
Suspending device pcspkr
Suspending device cpu0
Suspending device msr0
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device agpgart
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:01:00.0
Suspending device 0000:02:04.2
Suspending device 0000:02:04.1
Suspending device 0000:02:04.0
Suspending device 0000:02:02.0
ACPI: PCI interrupt for device 0000:02:02.0 disabled
Suspending device 0000:02:01.0
Suspending device 0000:02:00.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:0b.0
Suspending device 0000:00:0a.0
Suspending device 0000:00:08.0
Suspending device 0000:00:06.1
Suspending device 0000:00:06.0
codec_write 0: semaphore is not ready for register 0x26
codec_write 0: semaphore is not ready for register 0x26
ACPI: PCI interrupt for device 0000:00:06.0 disabled
Suspending device 0000:00:02.2
ACPI: PCI interrupt for device 0000:00:02.2 disabled
ehci_hcd 0000:00:02.2: --> PCI D3/wakeup
Suspending device 0000:00:02.1
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ohci_hcd 0000:00:02.1: --> PCI D3/wakeup
Suspending device 0000:00:02.0
ACPI: PCI interrupt for device 0000:00:02.0 disabled
ohci_hcd 0000:00:02.0: --> PCI D3/wakeup
Suspending device 0000:00:01.1
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device pci0000:00
Suspending device LNXTHERM:01
Suspending device LNXTHERM:00
Suspending device PNP0C0F:0d
Suspending device PNP0C0F:0c
Suspending device PNP0C0F:0b
Suspending device PNP0C0F:0a
Suspending device PNP0C0F:09
Suspending device PNP0C0F:08
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device LNXVIDEO:00
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device PNP0401:00
Suspending device PNP0700:00
Suspending device PNP0A05:00
Suspending device PNP0F13:00
Suspending device PNP0303:00
Suspending device PNP0C04:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0000:00
Suspending device PNP0C02:01
Suspending device PNP0C0A:00
Suspending device PNP0C09:00
Suspending device PNP0C01:00
Suspending device PNP0C02:00
Suspending device ACPI0003:00
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device device:0f
Suspending device device:0e
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C0D:00
Suspending device PNP0C0C:00
Suspending device pnp0c14:00
Suspending device device:00
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
 hwsleep-0318 [00] enter_sleep_state     : Entering sleep state [S3]
Back to C!
WARNING: at arch/x86_64/kernel/smp.c:427 smp_call_function_single()

Call Trace:
 [<ffffffff8021ddf7>] smp_call_function_single+0xc7/0xd0
 [<ffffffff80215ff7>] sc_freq_event+0x87/0x90
 [<ffffffff8053d491>] notifier_call_chain+0x51/0x70
 [<ffffffff8025b5fd>] __srcu_notifier_call_chain+0x5d/0x90
 [<ffffffff80499789>] cpufreq_resume+0x109/0x110
 [<ffffffff804478e3>] __sysdev_resume+0x33/0x50
 [<ffffffff80447f78>] sysdev_resume+0x58/0x90
 [<ffffffff8044d739>] device_power_up+0x9/0x20
 [<ffffffff8026f0ed>] suspend_devices_and_enter+0xed/0x100
 [<ffffffff8026f298>] enter_state+0x198/0x1d0
 [<ffffffff8026f38a>] state_store+0xba/0xf0
 [<ffffffff802fed1e>] sysfs_write_file+0xfe/0x160
 [<ffffffff802b1e88>] vfs_write+0xc8/0x180
 [<ffffffff802b2593>] sys_write+0x53/0x90
 [<ffffffff8020c39e>] system_call+0x7e/0x83

INFO: lockdep is turned off.
agpgart: Setting up Nforce3 AGP.
ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b00007, writing b00006)
ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b00007, writing b00006)
ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b00007, writing b00003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:08.0 to 64
PM: Writing back config space on device 0000:00:0a.0 at offset 9 (was fff0, writing 57f05000)
PM: Writing back config space on device 0000:00:0a.0 at offset 6 (was 80020200, writing 800a0200)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PM: Writing back config space on device 0000:00:0b.0 at offset 7 (was 22000f0, writing 222000f0)
PM: Writing back config space on device 0000:02:00.0 at offset f (was 4020100, writing 402010b)
PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 0, writing e0100000)
PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing e0108000)
PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2100000, writing 2100116)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing e0108800)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 1, writing 7001)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900107)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
PCI: Enabling device 0000:02:02.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:02:02.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, writing e0104000)
PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2, writing 106)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010b)
PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 34fc)
PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 3400)
PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 30fc)
PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 3000)
PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing e07ff000)
PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing e0400000)
PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 53fff000)
PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 50000000)
PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 40000000, writing b0060302)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824008, writing 82a810)
PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100107, writing 2100007)
PM: Writing back config space on device 0000:02:04.1 at offset f (was 34002ff, writing 5c0020a)
PM: Writing back config space on device 0000:02:04.1 at offset e (was 0, writing 3cfc)
PM: Writing back config space on device 0000:02:04.1 at offset d (was 0, writing 3c00)
PM: Writing back config space on device 0000:02:04.1 at offset c (was 0, writing 38fc)
PM: Writing back config space on device 0000:02:04.1 at offset b (was 0, writing 3800)
PM: Writing back config space on device 0000:02:04.1 at offset a (was 0, writing e0fff000)
PM: Writing back config space on device 0000:02:04.1 at offset 9 (was 0, writing e0c00000)
PM: Writing back config space on device 0000:02:04.1 at offset 8 (was 0, writing 57fff000)
PM: Writing back config space on device 0000:02:04.1 at offset 7 (was e1000000, writing 54000000)
PM: Writing back config space on device 0000:02:04.1 at offset 6 (was 40000000, writing b00a0702)
PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 824008, writing 82a810)
PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100103, writing 2100007)
PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 1, writing 7401)
PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100107)
PM: Writing back config space on device 0000:01:00.0 at offset f (was 1050100, writing 105010b)
PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing f8000008)
PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing f0000008)
PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 0, writing e2000000)
PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 4000)
PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b00000, writing 2b00007)
pnp: Failed to activate device 00:08.
pnp: Failed to activate device 00:09.
sd 0:0:0:0: [sda] Starting disk
ata2: ACPI get timing mode failed (AE 0x1001)
ata2.00: configured for MWDMA2
ata1: ACPI get timing mode failed (AE 0x1001)
ata1.00: configured for UDMA/33
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb usb1: usb resume
ehci_hcd 0000:00:02.2: resume root hub
hub 1-0:1.0: hub_resume
usb usb2: usb resume
ohci_hcd 0000:00:02.0: resume root hub
hub 2-0:1.0: hub_resume
usb usb3: usb resume
ohci_hcd 0000:00:02.1: resume root hub
hub 3-0:1.0: hub_resume
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1 status 0001.0501 after resume, 0
usb 1-1: can't resume, status -19
hub 1-0:1.0: logical disconnect on port 1
PM: Finishing wakeup.
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
usb 1-1: USB disconnect, address 2
usb 1-1: unregistering device
usb 1-1: usb_disable_device nuking all URBs
usb 1-1: unregistering interface 1-1:1.0
Buffer I/O error on device sdb1, logical block 5573
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 5574
lost page write due to I/O error on sdb1
REISERFS: abort (device sdb1): Journal write error in flush_commit_list
REISERFS: Aborting journal for filesystem on sdb1
done.
usb 1-1:1.0: uevent
usb 1-1:1.0: uevent
usb 1-1: uevent
ehci_hcd 0000:00:02.2: port 1 high speed
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using ehci_hcd and address 3
ehci_hcd 0000:00:02.2: port 1 high speed
ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usb 1-1:1.0: uevent
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: ganged power switching
hub 1-1:1.0: global over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
hub 1-1:1.0: Port indicators are supported
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: no over-current condition exists
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ffff81000515b140 start 255 [1/0 us]
drivers/usb/core/inode.c: creating file '003'
usb 1-1: new device found, idVendor=05e3, idProduct=0608
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
ohci_hcd 0000:00:02.0: auto-stop root hub
ohci_hcd 0000:00:02.1: auto-stop root hub
hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1.1: new full speed USB device using ehci_hcd and address 4
hub 1-1:1.0: port 1 not reset yet, waiting 10ms
usb 1-1.1: ep0 maxpacket = 8
usb 1-1.1: default language 0x0409
usb 1-1.1: uevent
usb 1-1.1: usb_probe_device
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
usb 1-1.1:1.0: uevent
usb 1-1.1:1.0: uevent
hub 1-1.1:1.0: usb_probe_interface
hub 1-1.1:1.0: usb_probe_interface - got id
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 2 ports detected
hub 1-1.1:1.0: compound device; port removable status: FF
hub 1-1.1:1.0: ganged power switching
hub 1-1.1:1.0: no over-current protection
hub 1-1.1:1.0: power on to power good time: 100ms
hub 1-1.1:1.0: hub controller current requirement: 100mA
hub 1-1.1:1.0: 100mA bus power budget for each child
hub 1-1.1:1.0: enabling power on all ports
usb 1-1.1: link qh128-0e01/ffff81000515b280 start 127 [1/2 us]
drivers/usb/core/inode.c: creating file '004'
usb 1-1.1: new device found, idVendor=0451, idProduct=2036
usb 1-1.1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: General Purpose USB Hub
hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
vbetool[56819]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007fffdbd82550 error 4
hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
usb 1-1.3: new high speed USB device using ehci_hcd and address 5
hub 1-1:1.0: port 3 not reset yet, waiting 10ms
usb 1-1.3: default language 0x0409
usb 1-1.3: uevent
usb 1-1.3: usb_probe_device
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
usb 1-1.3:1.0: uevent
usb 1-1.3:1.0: uevent
libusual 1-1.3:1.0: usb_probe_interface
libusual 1-1.3:1.0: usb_probe_interface - got id
usb-storage 1-1.3:1.0: usb_probe_interface
usb-storage 1-1.3:1.0: usb_probe_interface - got id
scsi3 : SCSI emulation for USB Mass Storage devices
scsi 2:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sdb1, logical block 5576
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 5577
lost page write due to I/O error on sdb1
drivers/usb/core/inode.c: creating file '005'
usb 1-1.3: new device found, idVendor=0781, idProduct=b4b5
usb 1-1.3: new device strings: Mfr=3, Product=4, SerialNumber=5
usb 1-1.3: Product: ImageMate 14 in 1 Reader/Writer 
usb 1-1.3: Manufacturer: SanDisk 
usb 1-1.3: SerialNumber: 0304237855
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
usb 1-1.4: new full speed USB device using ehci_hcd and address 6
usb 1-1.4: ep0 maxpacket = 8
usb 1-1.4: default language 0x0409
usb 1-1.4: uevent
usb 1-1.4: usb_probe_device
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
usb 1-1.4:1.0: uevent
usb 1-1.4:1.0: uevent
hub 1-1.4:1.0: usb_probe_interface
hub 1-1.4:1.0: usb_probe_interface - got id
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 3 ports detected
hub 1-1.4:1.0: compound device; port removable status: FFF
hub 1-1.4:1.0: ganged power switching
hub 1-1.4:1.0: global over-current protection
hub 1-1.4:1.0: power on to power good time: 100ms
hub 1-1.4:1.0: local power source is good
hub 1-1.4:1.0: no over-current condition exists
hub 1-1.4:1.0: enabling power on all ports
usb 1-1.4: link qh128-0e01/ffff81000515b460 start 127 [1/2 us]
drivers/usb/core/inode.c: creating file '006'
usb 1-1.4: new device found, idVendor=045e, idProduct=0707
usb 1-1.4: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Microsoft USB Hub
usb 1-1.4: Manufacturer: Microsoft
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
hub 1-1.1:1.0: state 7 ports 2 chg 0000 evt 0002
hub 1-1.1:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1.1.1: new low speed USB device using ehci_hcd and address 7
usb 1-1.1.1: skipped 1 descriptor after interface
usb 1-1.1.1: skipped 1 descriptor after interface
usb 1-1.1.1: default language 0x0409
usb 1-1.1.1: uevent
usb 1-1.1.1: usb_probe_device
usb 1-1.1.1: configuration #1 chosen from 1 choice
usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0)
usb 1-1.1.1:1.0: uevent
usb 1-1.1.1:1.0: uevent
usb 1-1.1.1: adding 1-1.1.1:1.1 (config #1, interface 1)
usb 1-1.1.1:1.1: uevent
usb 1-1.1.1:1.1: uevent
drivers/usb/core/inode.c: creating file '007'
usb 1-1.1.1: new device found, idVendor=046d, idProduct=c704
usb 1-1.1.1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.1: Product: USB Receiver
usb 1-1.1.1: Manufacturer: Logitech
usb 1-1.1.1: SerialNumber: 04E5EF
hub 1-1.1:1.0: 302mA power budget left
hub 1-1.4:1.0: state 7 ports 3 chg 0000 evt 0008
hub 1-1.4:1.0: port 3, status 0101, change 0001, 12 Mb/s
hub 1-1.4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
usb 1-1.4.3: new full speed USB device using ehci_hcd and address 8
hub 1-1.4:1.0: port 3 not reset yet, waiting 10ms
usb 1-1.4.3: ep0 maxpacket = 8
usb 1-1.4.3: skipped 1 descriptor after interface
usb 1-1.4.3: default language 0x0409
usb 1-1.4.3: uevent
usb 1-1.4.3: usb_probe_device
usb 1-1.4.3: configuration #1 chosen from 1 choice
usb 1-1.4.3: adding 1-1.4.3:1.0 (config #1, interface 0)
usb 1-1.4.3:1.0: uevent
usb 1-1.4.3:1.0: uevent
drivers/usb/core/inode.c: creating file '008'
usb 1-1.4.3: new device found, idVendor=045e, idProduct=0714
usb 1-1.4.3: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4.3: Product: Microsoft? Wireless Laser Mouse 8000
usb 1-1.4.3: Manufacturer: Microsoft
usb 1-1.4.3: SerialNumber: 00125A5F14F3
hub 1-1.1:1.0: state 7 ports 2 chg 0000 evt 0002
hub 1-1.4:1.0: state 7 ports 3 chg 0000 evt 0008
usbhid 1-1.1.1:1.0: usb_probe_interface
usbhid 1-1.1.1:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7
usb 1-1.1.1: link qh8-0e01/ffff81000515b640 start 7 [1/2 us]
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.2-1.1.1
usbhid 1-1.1.1:1.1: usb_probe_interface
usbhid 1-1.1.1:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input8
usb 1-1.1.1: link qh8-1c02/ffff81000515b6e0 start 7 [1/2 us]
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-1.1.1
usbhid 1-1.4.3:1.0: usb_probe_interface
usbhid 1-1.4.3:1.0: usb_probe_interface - got id
input: Microsoft Microsoft? Wireless Laser Mouse 8000 as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/input/input9
input: USB HID v1.11 Mouse [Microsoft Microsoft? Wireless Laser Mouse 8000] on usb-0000:00:02.2-1.4.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ohci_hcd 0000:00:02.0: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ohci_hcd 0000:00:02.1: suspend root hub
usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us]
usb 1-1.4.3: unlink qh4-3804/ffff81000515b780 start 3 [1/2 us]
ehci_hcd 0000:00:02.2: reused qh ffff81000515b780 schedule
usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us]
usb 1-1.4.3: unlink qh4-3804/ffff81000515b780 start 3 [1/2 us]
ehci_hcd 0000:00:02.2: reused qh ffff81000515b780 schedule
usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us]
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
scsi 3:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
scsi 3:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
scsi 3:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9339 PQ: 0 ANSI: 0
sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:1: [sdc] Attached SCSI removable disk
sd 3:0:0:1: Attached scsi generic sg3 type 0
sd 3:0:0:2: [sdd] Attached SCSI removable disk
sd 3:0:0:2: Attached scsi generic sg4 type 0
sd 3:0:0:3: [sde] Attached SCSI removable disk
sd 3:0:0:3: Attached scsi generic sg5 type 0
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
netconsole: local port 6665
netconsole: local IP 0.0.0.0
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.100.113
netconsole: remote ethernet address 00:0a:e6:a7:29:60
netconsole: local IP 192.168.100.240
console [netcon0] enabled
netconsole: network logging started
eth0: no IPv6 routers present
end_request: I/O error, dev sr0, sector 112
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!
Hangcheck: hangcheck value past margin!

-- 
Zan Lynx <[email protected]>

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux