Re: [Linux-fbdev-devel] [RFC] driving a LCD panel via I2C

[Richard Purdie <rpurdie@rpsys.net>]

On Mon, 2007-09-24 at 12:34 +0200, Haavard Skinnemoen wrote: 
> On Mon, 24 Sep 2007 10:58:08 +0200 (CEST)
> "Rodolfo Giometti" <giometti@enneenne.com> wrote:
> > I have an LCD panel on a custom PXA27x based board and it must be
> > turned on/off by some special commands via a GPIO throught a I2C chip.
> > 
> > I'd like some suggestion about I can easily manage this situation.
> 
> I have a similar panel in the sense that it needs a bunch of SPI
> commands to get started. I implemented a LCD driver
> (drivers/video/backlight) for it so that it is automatically turned
> on/off at bootup/shutdown, and can be manually turned on/off
> through /sys/class/lcd/ltv350qv/power. AFAIK the driver is currently
> sitting in the backlight tree scheduled for inclusion in 2.6.24.

It is, its queued as
http://git.o-hand.com/?p=linux-rpurdie-backlight;a=commitdiff;h=c962fe18c64ae9139028ee674ab3c380449ce052

Its also worth noting that corgi-bl.c has a variant (akita) that uses a
gpio over an I2C IO expander for the backlight control. The code paths
are a little convoluted since other gpios are used by other drivers. The
base driver is in arch/arm/mach-pxa/akita-ioexp.c, the set_intensity
function is in arch/arm/mach-pxa/corgi_lcd.c and the base backlight
device in arch/arm/mach-pxa/spitz.c. I will be moving the set_intensity
to spitz.c to make things a little clearer.

Also, I'm in the process of turning corgi-bl.c into a generic backlight
driver which might help you, see:

http://git.o-hand.com/?p=linux-rpurdie-backlight;a=commitdiff;h=c74f241bf53bf5251c7c10f65041c20979f6c694

Now, the GPIO framework could help too (it didn't exist when I wrote
akita-ioexp)...

Regards,

Richard

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/