Re: 2.6.23-rc4-mm1 and -rc6-mm1: boot failure on HP nx6325, related to clockevents

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, 24 September 2007 16:23, Thomas Gleixner wrote:
> On Mon, 2007-09-24 at 15:52 +0200, Rafael J. Wysocki wrote:
> > > > > So I really wonder, why noacpitimer on the kernel command line makes any
> > > > > difference. I'm confused.
> > > > 
> > > > \metoo
> > > > 
> > > > Well, it was probably read as "noacpi". :-)
> > > 
> > > Hmm, ACPI is in the log all over the place.
> > 
> > Well, "noacpi" seems to be a synonym for "pci=noacpi".
> > 
> > Anyway, it causes acpi_disable_pci() to be executed, which according to
> > Documentation/kernel-parameters.txt means "Do not use ACPI for IRQ routing or
> > for PCI scanning" (it works like this on x86_64 too, although the doc says it's
> > x86_32-specific).
> 
> Hrm. The local apic timer calibration does not use anything which is
> related to interrupts, but if we use the local APIC timer we switch off
> PIT.
> 
> Can you boot Linus latest (w/o hrt patches) and add "apicmaintimer" to
> the kernel command line please ?

Works, dmesg attached.

Greetings,
Rafael
Linux version 2.6.23-rc7test (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #19 SMP Mon Sep 24 16:55:05 CEST 2007
Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 apicmaintimer apic=verbose 2
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
 BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved)
 BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS)
 BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
 BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7D30, 0024 (r2 HP    )
ACPI: XSDT 77FE57B4, 0054 (r1 HP     0944      6070620 HP          1)
ACPI: FACP 77FE5684, 00F4 (r4 HP     0944            3 HP          1)
ACPI: DSDT 77FE58DC, EE7A (r1 HP        SB400    10000 MSFT  100000E)
ACPI: FACS 77FF7E80, 0040
ACPI: APIC 77FE5808, 0062 (r1 HP     0944            1 HP          1)
ACPI: MCFG 77FE586C, 003C (r1 HP     0944            1 HP          1)
ACPI: TCPA 77FE58A8, 0032 (r2 HP     0944            1 HP          1)
ACPI: SSDT 77FF4756, 0059 (r1 HP       HPQNLP        1 MSFT  100000E)
ACPI: SSDT 77FF47AF, 0206 (r1 HP     PSSTBLID        1 HP          1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
No mptable found.
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   491472
On node 0 totalpages: 491375
  DMA zone: 56 pages used for memmap
  DMA zone: 1442 pages reserved
  DMA zone: 2501 pages, LIFO batch:0
  DMA32 zone: 6663 pages used for memmap
  DMA32 zone: 480713 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fb000 (        fee00000)
mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 47320 bytes of per cpu data
Built 1 zonelists in Zone order.  Total pages: 483214
Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 apicmaintimer apic=verbose 2
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1995.108 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 1c8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1924072k/1965888k available (2196k kernel code, 41144k reserved, 1433k data, 248k init)
Calibrating delay using timer specific routine.. 3994.18 BogoMIPS (lpj=7988376)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0<7>IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
, 2-16, 2-17, 2-18, 2-19, 2-20<7>IOAPIC[0]: Set routing entry (2-21 -> 0x49 -> IRQ 21 Mode:1 Active:1)
, 2-22, 2-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... works.
Using local APIC timer interrupts.
result 12469442
Detected 12.469 MHz APIC timer.
timer: PIT interrupt stopped.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 3990.23 BogoMIPS (lpj=7980478)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Brought up 2 CPUs
Time: 15:06:59  Date: 08/24/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: No mmconfig possible on device 00:18
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x15
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................
Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.......
Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [C074] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI: Power Resource [C223] (off)
ACPI: Power Resource [C1FE] (off)
ACPI: Power Resource [C217] (on)
ACPI: Power Resource [C34B] (off)
ACPI: Power Resource [C34C] (off)
ACPI: Power Resource [C34D] (off)
ACPI: Power Resource [C34E] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 00000000
.......    : physical APIC id: 00
.... register #01: 00178021
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0021
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
 00 000 1    0    0   0   0    0    0    00
 01 003 0    0    0   0   0    1    1    31
 02 003 1    0    0   0   0    0    0    30
 03 003 0    0    0   0   0    1    1    33
 04 003 0    0    0   0   0    1    1    34
 05 003 0    0    0   0   0    1    1    35
 06 003 0    0    0   0   0    1    1    36
 07 003 0    0    0   0   0    1    1    37
 08 003 0    0    0   0   0    1    1    38
 09 003 1    0    0   0   0    1    1    39
 0a 003 0    0    0   0   0    1    1    3A
 0b 003 0    0    0   0   0    1    1    3B
 0c 003 0    0    0   0   0    1    1    3C
 0d 003 0    0    0   0   0    1    1    3D
 0e 003 0    0    0   0   0    1    1    3E
 0f 003 0    0    0   0   0    1    1    3F
 10 000 1    0    0   0   0    0    0    00
 11 000 1    0    0   0   0    0    0    00
 12 000 1    0    0   0   0    0    0    00
 13 000 1    0    0   0   0    0    0    00
 14 000 1    0    0   0   0    0    0    00
 15 003 0    1    0   1   0    1    1    49
 16 000 1    0    0   0   0    0    0    00
 17 000 1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ21 -> 0:21
.................................... done.
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x77ffffff could not be reserved
pnp: 00:0a: ioport range 0x40b-0x40b has been reserved
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0b: ioport range 0x8000-0x802f has been reserved
pnp: 00:0b: ioport range 0x8100-0x811f has been reserved
pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:0c: iomem range 0xcf000-0xcffff has been reserved
pnp: 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: 6000-6fff
  MEM window: d4300000-d43fffff
  PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:04.0
  IO window: 4000-5fff
  MEM window: d0000000-d3ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
  IO window: 2000-3fff
  MEM window: cc000000-cfffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: c8000000-c80fffff
  PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 88000000-8bffffff
  MEM window: 90000000-93ffffff
PCI: Bridge: 0000:00:14.4
  IO window: 1000-1fff
  MEM window: d4000000-d42fffff
  PREFETCH window: 88000000-8bffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
IOAPIC[0]: Set routing entry (2-20 -> 0x51 -> IRQ 20 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5222k freed
audit: initializing netlink socket (disabled)
audit(1190646419.972:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. MSI deactivated.
Boot video device is 0000:01:05.0
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
Allocate Port Service[0000:00:04.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie03]
AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
sata_sil 0000:00:12.0: version 2.3
IOAPIC[0]: Set routing entry (2-16 -> 0x59 -> IRQ 16 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xffffc2000002a080 ctl 0xffffc2000002a08a bmdma 0xffffc2000002a000 irq 16
ata2: SATA max UDMA/100 cmd 0xffffc2000002a0c0 ctl 0xffffc2000002a0ca bmdma 0xffffc2000002a008 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
NET: Registered protocol family 1
swsusp: Resume From Partition /dev/sda1
PM: Checking swsusp image.
PM: Resume from disk failed.
  Magic number: 7:477:134
  hash matches device device:09
Freeing unused kernel memory: 248k freed
Write protecting the kernel read-only data: 1056k
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 128
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio
ATIIXP: simplex device: DMA disabled
ide1: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
swsusp: Resume From Partition 8:1
PM: Checking swsusp image.
PM: Resume from disk failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:07 failed with error -16
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI at 0xd4019000 irq 20 PIO
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file 'devices'
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: created debug files
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.23-rc7test ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 4ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: trying to enable port power on non-switchable hub
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: created debug files
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000
bcm43xx driver
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #0005
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010101 CSC PPS CCS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010301 CSC LSDA PPS CCS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.23-rc7test ohci_hcd
usb usb2: SerialNumber: 0000:00:13.1
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 4ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001'
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
IOAPIC[0]: Set routing entry (2-18 -> 0x69 -> IRQ 18 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
usb 1-2: new full speed USB device using ohci_hcd and address 2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
usb 1-2: skipped 1 descriptor after interface
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: HP Integrated Module
usb 1-2: Manufacturer: Broadcom Corp
usb 1-2: uevent
usb 1-2: usb_probe_device
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: uevent
usb 1-2:1.0: uevent
usb 1-2: adding 1-2:1.1 (config #1, interface 1)
usb 1-2:1.1: uevent
usb 1-2:1.1: uevent
usb 1-2: adding 1-2:1.2 (config #1, interface 2)
usb 1-2:1.2: uevent
usb 1-2:1.2: uevent
usb 1-2: adding 1-2:1.3 (config #1, interface 3)
usb 1-2:1.3: uevent
usb 1-2:1.3: uevent
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '002'
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[d4011000-d40117ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
tg3.c:v3.81 (September 5, 2007)
IOAPIC[0]: Set routing entry (2-23 -> 0x71 -> IRQ 23 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
eth1: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
Yenta: Enabling burst memory read transactions
ehci_hcd 0000:00:13.2: EHCI Host Controller
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '003'
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8
ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024
ehci_hcd 0000:00:13.2: MWI active
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.23-rc7test ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Single TT
hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
Yenta: Using INTVAL to route CSC interrupts to PCI
usb 2-1: new full speed USB device using ohci_hcd and address 2
floppy0: no floppy controllers found
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:13.1: urb ffff810075039158 path 1 ep0in 5ec20000 cc 5 --> status -62
ohci_hcd 0000:00:13.1: urb ffff810075039158 path 1 ep0in 5ec20000 cc 5 --> status -62
ohci_hcd 0000:00:13.1: urb ffff810075039158 path 1 ep0in 5ec20000 cc 5 --> status -62
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010100 CSC PPS
hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
net ethxx0: device_rename: sysfs_create_symlink failed (-17)
hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0002
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 2
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
hci_usb 1-2:1.0: usb_probe_interface
hci_usb 1-2:1.0: usb_probe_interface - got id
hci_usb_probe: Can't set isoc interface settings
hci_usb 1-2:1.1: usb_probe_interface
hci_usb 1-2:1.1: usb_probe_interface - got id
hci_usb 1-2:1.2: usb_probe_interface
hci_usb 1-2:1.2: usb_probe_interface - got id
hci_usb 1-2:1.3: usb_probe_interface
hci_usb 1-2:1.3: usb_probe_interface - got id
usb 1-2: unregistering device
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81
usb_endpoint usbdev1.2_ep82: ep_device_release called for usbdev1.2_ep82
usb_endpoint usbdev1.2_ep02: ep_device_release called for usbdev1.2_ep02
usb 1-2:1.0: uevent
usb 1-2:1.0: uevent
usb 1-2: unregistering interface 1-2:1.1
usb_endpoint usbdev1.2_ep83: ep_device_release called for usbdev1.2_ep83
usb_endpoint usbdev1.2_ep03: ep_device_release called for usbdev1.2_ep03
usb 1-2:1.1: uevent
usb 1-2:1.1: uevent
usb 1-2: unregistering interface 1-2:1.2
usb_endpoint usbdev1.2_ep84: ep_device_release called for usbdev1.2_ep84
usb_endpoint usbdev1.2_ep04: ep_device_release called for usbdev1.2_ep04
usb 1-2:1.2: uevent
usb 1-2:1.2: uevent
usb 1-2: unregistering interface 1-2:1.3
usb 1-2:1.3: uevent
usb 1-2:1.3: uevent
usb_endpoint usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00
usb 1-2: uevent
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
net eth0: device_rename: sysfs_create_symlink failed (-17)
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 7 ports 8 chg 0000 evt 0000
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
net eth1: device_rename: sysfs_create_symlink failed (-17)
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 3-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 3-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f9929613f0c]
ohci_hcd 0000:00:13.0: auto-stop root hub
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 3-0:1.0: port 3 not reset yet, waiting 50ms
ohci_hcd 0000:00:13.0: auto-wakeup root hub
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 3-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0002
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
usbcore: registered new interface driver hci_usb
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 2-1: new full speed USB device using ohci_hcd and address 3
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Bluetooth: RFCOMM socket layer initialized
usb 2-1: ep0 maxpacket = 8
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 2-1: default language 0x0409
usb 2-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: Fingerprint Sensor
usb 2-1: uevent
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
usb 2-1:1.0: uevent
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 2-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 2-3: new low speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 2-3: skipped 1 descriptor after interface
usb 2-3: skipped 1 descriptor after interface
usb 2-3: default language 0x0409
usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Receiver
usb 2-3: Manufacturer: Logitech
usb 2-3: uevent
usb 2-3: usb_probe_device
usb 2-3: configuration #1 chosen from 1 choice
usb 2-3: adding 2-3:1.0 (config #1, interface 0)
usb 2-3:1.0: uevent
usb 2-3:1.0: uevent
usb 2-3: adding 2-3:1.1 (config #1, interface 1)
usb 2-3:1.1: uevent
usb 2-3:1.1: uevent
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '004'
hub 3-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 1-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 1-2: skipped 1 descriptor after interface
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: HP Integrated Module
usb 1-2: Manufacturer: Broadcom Corp
usb 1-2: uevent
usb 1-2: usb_probe_device
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: uevent
usb 1-2:1.0: uevent
hci_usb 1-2:1.0: usb_probe_interface
hci_usb 1-2:1.0: usb_probe_interface - got id
usb 1-2: adding 1-2:1.1 (config #1, interface 1)
usb 1-2:1.1: uevent
usb 1-2:1.1: uevent
usb 1-2: adding 1-2:1.2 (config #1, interface 2)
usb 1-2:1.2: uevent
usb 1-2:1.2: uevent
hci_usb 1-2:1.2: usb_probe_interface
hci_usb 1-2:1.2: usb_probe_interface - got id
usb 1-2: adding 1-2:1.3 (config #1, interface 3)
usb 1-2:1.3: uevent
usb 1-2:1.3: uevent
hci_usb 1-2:1.3: usb_probe_interface
hci_usb 1-2:1.3: usb_probe_interface - got id
/home/rafael/src/linux-2.6/drivers/usb/core/inode.c: creating file '003'
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
usbcore: registered new interface driver hiddev
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
usbhid 2-3:1.0: usb_probe_interface
usbhid 2-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usbhid 2-3:1.1: usb_probe_interface
usbhid 2-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input3
/home/rafael/src/linux-2.6/drivers/usb/core/file.c: looking for a minor, starting at 96
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
input: SynPS/2 Synaptics TouchPad as /class/input/input4
usbcore: registered new interface driver usbhid
/home/rafael/src/linux-2.6/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Adding 1052216k swap on /dev/sda1.  Priority:-1 extents:1 across:1052216k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ACPI: AC Adapter [C1BD] (on-line)
ACPI: Battery Slot [C1BF] (battery present)
ACPI: Battery Slot [C1BE] (battery absent)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [C25A]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C25B]
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Fan [C34F] (off)
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Fan [C350] (off)
ACPI: Transitioning device [C351] to D3
ACPI: Transitioning device [C351] to D3
ACPI: Fan [C351] (off)
ACPI: Transitioning device [C352] to D3
ACPI: Transitioning device [C352] to D3
ACPI: Fan [C352] (off)
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Processor [C001] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (61 C)
ACPI: Thermal Zone [TZ2] (51 C)
ACPI: Thermal Zone [TZ3] (32 C)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x13
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x15
powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x17
powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
powernow-k8: ph2 null fid transition 0xc

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux