Re: MTRR initialization

["Siddha, Suresh B" <suresh.b.siddha@intel.com>]

On Fri, Sep 14, 2007 at 09:33:30AM -0700, Howard Chu wrote:
> Hi, was wondering if anyone else has been tripped up by this... I've got
> 4GB of
> RAM in my Asus A8V Deluxe and memory hole mapping enabled in the BIOS. By
> default, my system boots up with these MTRR settings:
> 
> reg00: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
> reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
> reg02: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
> reg03: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
> 
> The X server and various other programs try to add a mapping for my video
> card's buffer, at 0xd0000000, size=256MB, type=write-combining, and this
> always
> fails with a type mismatch error (old type is write-back). Apparently it's
> conflicting with mapping register 0. I can't just disable the existing
> settings
> and re-add them; the system hangs soon after disabling reg01.
> 
> I guess the kernel must be getting the initial setup from the BIOS. I've
> hacked
> around this in mtrr/generic.c by explicitly changing the MTRR state in
> get_mtrr_state to split the first mapping into two; one at base 0 size
> 2048M
> and one at base 2048M size 1024M. So now I have this, which is pretty much
> what
> I wanted:
> 
> reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
> reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
> reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
> reg03: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
> reg04: base=0xc0000000 (3072MB), size= 256MB: write-combining, count=1
> reg05: base=0xd0000000 (3328MB), size= 256MB: write-combining, count=1

BTW, having overlapping WC, UC regions make the end result UC. So in this
case, you may not be getting the desired performance.

> 
> So the question is - was there an easier/correct way to do this?
> 
> It might have been nice if the MTRR ioctls allowed the register number to
> be
> specified on the Set commands, though I'm not sure that would have helped
> in
> this case.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/