On 08/09/2007 12:55 PM, Andrew Morton wrote:
> On Thu, 9 Aug 2007 11:59:43 +0200 Matthias Hensler <[email protected]> wrote:
>
>> On Sat, Aug 04, 2007 at 10:44:26AM +0200, Matthias Hensler wrote:
>>> On Fri, Aug 03, 2007 at 11:34:07AM -0700, Andrew Morton wrote:
>>> [...]
>>> I am also willing to try the patch posted by Richard.
>> I want to give some update here:
>>
>> 1. We finally hit the problem on a third system, with a total different
>> setup and hardware. However, again high I/O load caused the problem
>> and the affected filesystems were mounted with noatime.
>>
>> 2. I installed a recompiled kernel with just the two line patch from
>> Richard Kennedy (http://lkml.org/lkml/2007/8/2/89). That system has 5
>> days uptime now and counting. I believe the patch fixed the problem.
>> However, I will continue running "vmstat 1" and the endless loop of
>> "cat /proc/meminfo", just in case I am wrong.
>>
>
> Did we ever see the /proc/meminfo and /proc/vmstat output during the stall?
>
> If Richard's patch has indeed fixed it then this confirms that we're seeing
> contention over the dirty-memory limits. Richard's patch isn't really the
> right one because it allows unlimited dirty-memory windup in some situations
> (large number of disks with small writes, or when we perform queue congestion
> avoidance).
>
> As you're seeing this happening when multiple disks are being written to it is
> possible that the per-device-dirty-threshold patches which recently went into
> -mm (and which appear to have a bug) will fix it.
>
> But I worry that the stall appears to persist *forever*. That would indicate
> that we have a dirty-memory accounting leak, or that for some reason the
> system has decided to stop doing writeback to one or more queues (might be
> caused by an error in a lower-level driver's queue congestion state management).
>
> If it is the latter, then it could be that running "sync" will clear the
> problem. Temporarily, at least. Because sync will ignore the queue congestion
> state.
>
This is still a problem for people, and no fix is in sight until 2.6.24.
Can we get some kind of band-aid, like making the endless 'for' loop in
balance_dirty_pages() terminate after some number of iterations? Clearly
if we haven't written "write_chunk" pages after a few tries, *and* we
haven't encountered congestion, there's no point in trying forever...
[not even compile tested patch follows]
---
mm/page-writeback.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- linux-2.6.22.noarch.orig/mm/page-writeback.c
+++ linux-2.6.22.noarch/mm/page-writeback.c
@@ -208,11 +208,12 @@ static void balance_dirty_pages(struct a
long background_thresh;
long dirty_thresh;
unsigned long pages_written = 0;
+ int i;
unsigned long write_chunk = sync_writeback_pages();
struct backing_dev_info *bdi = mapping->backing_dev_info;
- for (;;) {
+ for (i = 0; ; i++) {
struct writeback_control wbc = {
.bdi = bdi,
.sync_mode = WB_SYNC_NONE,
@@ -250,6 +251,8 @@ static void balance_dirty_pages(struct a
pages_written += write_chunk - wbc.nr_to_write;
if (pages_written >= write_chunk)
break; /* We've done our duty */
+ if (i >= write_chunk && !wbc.encountered_congestion)
+ break; /* nothing to write? */
}
congestion_wait(WRITE, HZ/10);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]