The UPF_FIXED_PORT flags was introduced in 2.6.22 and it can be used
instead of the driver specific verify_port routine.
Signed-off-by: Atsushi Nemoto <[email protected]>
---
drivers/serial/serial_txx9.c | 26 +++++---------------------
1 files changed, 5 insertions(+), 21 deletions(-)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 0930e2a..c25c9a5 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
-static char *serial_version = "1.10";
+static char *serial_version = "1.11";
static char *serial_name = "TX39/49 Serial driver";
#define PASS_LIMIT 256
@@ -68,8 +68,6 @@ static char *serial_name = "TX39/49 Serial driver";
*/
#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-
struct uart_txx9_port {
struct uart_port port;
/* No additional info for now */
@@ -756,21 +754,6 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags)
serial_txx9_initialize(port);
}
-static int
-serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- unsigned long new_port = ser->port;
- if (HIGH_BITS_OFFSET)
- new_port += (unsigned long)ser->port_high << HIGH_BITS_OFFSET;
- if (ser->type != port->type ||
- ser->irq != port->irq ||
- ser->io_type != port->iotype ||
- new_port != port->iobase ||
- (unsigned long)ser->iomem_base != port->mapbase)
- return -EINVAL;
- return 0;
-}
-
static const char *
serial_txx9_type(struct uart_port *port)
{
@@ -794,7 +777,6 @@ static struct uart_ops serial_txx9_pops = {
.release_port = serial_txx9_release_port,
.request_port = serial_txx9_request_port,
.config_port = serial_txx9_config_port,
- .verify_port = serial_txx9_verify_port,
};
static struct uart_txx9_port serial_txx9_ports[UART_NR];
@@ -950,7 +932,8 @@ int __init early_serial_txx9_setup(struct uart_port *port)
serial_txx9_ports[port->line].port = *port;
serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
- serial_txx9_ports[port->line].port.flags |= UPF_BOOT_AUTOCONF;
+ serial_txx9_ports[port->line].port.flags |=
+ UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
return 0;
}
@@ -995,7 +978,8 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
uart->port.irq = port->irq;
uart->port.uartclk = port->uartclk;
uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.flags = port->flags
+ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
uart->port.mapbase = port->mapbase;
if (port->dev)
uart->port.dev = port->dev;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]