Re: 2.6.23-rc6 : crash with RTL8187 USB

["Rob Hussey" <robjhussey@gmail.com>]

On 9/15/07, ポール・ロラン Paul Rolland <rol@witbe.net> wrote:
> Hello,
>
> Each time I add the support for this piece of hardware, I have a crash during
> the boot process.
> Serial console gives the attached boot message...
>
...
> WARNING: at lib/kref.c:33 kref_get()
> Call Trace:
>  [<ffffffff8121fa41>] kref_get+0x2f/0x36
>  [<ffffffff8121ec3f>] kobject_get+0x12/0x17
>  [<ffffffff8121edad>] kobject_shadow_add+0x7f/0x1a2
>  [<ffffffff812beaa4>] device_add+0xb7/0x631
>  [<ffffffff81040607>] msleep+0x14/0x1e
>  [<ffffffff8149f95f>] wiphy_register+0x29/0x80
>  [<ffffffff814a4a9b>] ieee80211_register_hw+0x11/0x208
>  [<ffffffff812e1a64>] rtl8187_probe+0x544/0x624

I had this problem as well. It has to do with mac80211, cfg80211 and
the rate control algorithm not initializing early enough in the boot
process. These two patches should fix it:

[PATCH] mac80211: fix initialisation when built-in
http://article.gmane.org/gmane.linux.kernel.wireless.general/5710/match=patch+mac80211+initialisation

[PATCH] cfg80211: fix initialisation if built-in
http://article.gmane.org/gmane.linux.network/71326/match=patch+cfg80211+initialisation

Regards,
Rob
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/