On Fri, Sep 14, 2007 at 11:14:21PM +0200, Stefan Richter wrote:
> Signed-off-by: Stefan Richter <[email protected]>
> ---
>
> And one more update:
> There is SAS too, and I forgot 'is' in "on a disk which __ accessed via".
>
> drivers/scsi/Kconfig | 67 ++++++++++++++++++++++---------------------
> 1 file changed, 35 insertions(+), 32 deletions(-)
>
> Index: linux-2.6.23-rc6/drivers/scsi/Kconfig
> ===================================================================
> --- linux-2.6.23-rc6.orig/drivers/scsi/Kconfig
> +++ linux-2.6.23-rc6/drivers/scsi/Kconfig
> @@ -12,23 +12,31 @@ config SCSI
> depends on BLOCK
> select SCSI_DMA if HAS_DMA
> ---help---
> - If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
> - any other SCSI device under Linux, say Y and make sure that you know
> - the name of your SCSI host adapter (the card inside your computer
> - that "speaks" the SCSI protocol, also called SCSI controller),
> - because you will be asked for it.
> -
> - You also need to say Y here if you have a device which speaks
> - the SCSI protocol. Examples of this include the parallel port
> - version of the IOMEGA ZIP drive, USB storage devices, Fibre
> - Channel, FireWire storage and the IDE-SCSI emulation driver.
> + This option enables core support for SCSI protocols.
> + You need it
> + - for classic parallel SCSI hardware,
> + - for newer SCSI transports such as Fibre Channel, FireWire storage,
> + SAS, or iSCSI,
> + - for non-SCSI hardware which speaks SCSI protocols, such as USB
> + storage devices or the parallel port version of Iomega Zip drive,
but not for CONFIG_BLK_DEV_UB
> + - for non-SCSI hardware whose drivers translate from and to SCSI
> + protocols, most notably all Serial ATA drivers, and Parallel ATA
> + via the ATA configuration option.
but not for CONFIG_BLK_DEV_IDE_SATA
> To compile this driver as a module, choose M here and read
> <file:Documentation/scsi/scsi.txt>.
> The module will be called scsi_mod.
>
> However, do not compile this as a module if your root file system
> - (the one containing the directory /) is located on a SCSI device.
> + (the one containing the directory /) is located on a SCSI device
> + or on a device whose driver represents it as SCSI device, as
> + indicated above. Choose Y in this case, or set up an initrd.
> +
> + Subsequent options in this menu enable specific SCSI command set
> + support for harddisks, CD/DVD-ROM/R/W, tapes etc.. This menu also
> + presents options for specific SCSI controllers, while options for
> + some other SCSI transports and all non-SCSI controllers are located
> + in other menus (SATA, USB, FireWire etc.).
>...
You expect all kconfig users to read and completely understand this?
Although it's no longer required that the user sees the CONFIG_SCSI
option at all since we can determine automaically when it's required
and when not?
> Stefan Richter
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
