On Fri, 14 Sep 2007 22:05:17 -0700 Randy Dunlap wrote:
> On Fri, 14 Sep 2007 21:28:12 -0700 (PDT) Linus Torvalds wrote:
>
> > On Wed, 12 Sep 2007, Randy Dunlap wrote:
> > >
> > > I run almost-daily kernel testing. I haven't seen 'crashme' cause a
> > > kernel fault until today, and now I've seen it twice on 2.6.23-rc6-git2,
> > > x86_64. After the first fault, I ran 'crashme' about 10 more times
> > > to get the second fault (usually for 10 minutes, one time for 30
> > > minutes).
> >
> > Interesting. If this is reproducible for you, can you try to narrow down
> > (with bit-bisect) roughly when it started.
>
> It doesn't happen quite on demand. Only 2 times in several hours
> of testing of the last few days.
>
> > > There is very little helpful info. RIP is strange, e.g.: 000000000051b446
> > > The call stack is not printed. No kernel symbols are printed,
> > > even though I have CONFIG_KALLSYMS{_ALL}=y.
> >
> > It looks like it's a page fault as a result of a *user*space* access, and
> > most likely your machine would continue happily, except you have
> > "panic_on_oops" set, so when the oops happens, it shuts the system down.
>
> I see.
>
> > Now, the reason I say it looks like a user space access is that you have
> >
> > RIP: 0033:[<0000000000510eea>]
> > RSP: 002b:00007fffc9a8ec10
> >
> > which are all user space segments. So the register contents clearly say
> > "page fault in user space".
> >
> > However, what makes the kernel oops (rather than just send a SIGSEGV) is
> > that the page fault "error code" is zero (that's the number that is
> > printed out just after the "Oops" string). For a normal user space access,
> > you should have bit #2 set in the error code.
> >
> > So the kernel thinks it's a kernel page fault, because the page fault
> > error code says so. But everything else seems to indicate that it's really
> > user mode.. It would be very interesting to hear when this started
> > happening.
> >
> > Even if you cannot bisect it down all the way, since you say that you do
> > almost daily kernel testing, is this really new to 2.6.23-rc6-git2, and
> > 2.6.23-rc6-git1 was fine?
>
> I'll check back thru my test logs.
I looked thru several hundred test logs and didn't find any other
occurrences of it. Doesn't prove much.
I'll continue to run the test most of this weekend.
> > Andi, anything comes to mind?
> >
> > Linus
> >
> > ---
> > > [ 7487.208128] Unable to handle kernel paging request at 00000000ff019b53 RIP:
> > > [ 7487.212752] [<0000000000510eea>]
> > > [ 7487.218537] PGD 10c1a2067 PUD 0
> > > [ 7487.221811] Oops: 0000 [1] SMP
> > > [ 7487.224989] CPU 2
> > > [ 7487.227024] Modules linked in: loop
> > > [ 7487.230550] Pid: 19139, comm: crashme Not tainted 2.6.23-rc6-git2 #1
> > > [ 7487.236896] RIP: 0033:[<0000000000510eea>] [<0000000000510eea>]
> > > [ 7487.242925] RSP: 002b:00007fffc9a8ec10 EFLAGS: 00010e83
> > > [ 7487.248234] RAX: 00000000ffff8c4a RBX: 00000000004014f1 RCX: 00002b20e11c8b37
> > > [ 7487.255361] RDX: 0000000000510ee0 RSI: 0000000000000000 RDI: 000000000000000a
> > > [ 7487.262489] RBP: 00007fffc9a8ec10 R08: 00007fffc9a8eb60 R09: 0000000000000000
> > > [ 7487.269616] R10: 0000000000000008 R11: 0000000000000612 R12: 0000000000000000
> > > [ 7487.276743] R13: 00007fffc9a8ee00 R14: 0000000000000000 R15: 0000000000000000
> > > [ 7487.283871] FS: 00002b20e13676d0(0000) GS:ffff81011fc75840(0000) knlGS:0000000000000000
> > > [ 7487.291952] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > > [ 7487.297693] CR2: 00000000ff019b53 CR3: 000000005be6b000 CR4: 00000000000006e0
> > > [ 7487.304821] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > [ 7487.311949] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > > [ 7487.319076] Process crashme (pid: 19139, threadinfo ffff810106830000, task ffff810102cf5040)
> > > [ 7487.327511]
> > > [ 7487.329009] RIP [<0000000000510eea>]
> > > [ 7487.332690] RSP <00007fffc9a8ec10>
> > > [ 7487.336180] CR2: 00000000ff019b53
> > > [ 7487.339810] Kernel panic - not syncing: Fatal exception
> > -
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]