On Wed, Sep 12, 2007 at 01:13:32PM +0200, Heiko Schocher wrote:
> Hello Greg
>
> Am Mittwoch, den 12.09.2007, 03:01 -0700 schrieb Greg KH:
> > On Wed, Sep 12, 2007 at 07:32:07AM +0200, Robert Schwebel wrote:
> > > On Tue, Sep 11, 2007 at 11:43:17AM +0200, Heiko Schocher wrote:
> > > > I have developed a device driver and use the sysFS to export some
> > > > registers to userspace.
> > >
> > > Uuuh, uggly. Don't do that. Device drivers are there to abstract things,
> > > not to play around with registers from userspace.
> > >
> > > > I opened the sysFS File for one register and did some reads from this
> > > > File, but I alwas becoming the same value from the register, whats not
> > > > OK, because they are changing. So I found out that the sysFS caches
> > > > the reads ... :-(
> > >
> > > Yes, it does. What you can do is close()ing the file handle between
> > > accesses, which makes it work but is slow.
> >
> > Do an lseek back to 0 and then re-read, you will get called in your
> > driver again.
>
> No thats not true. I thought this too, but if I make a:
>
> seek (fd, 0L, SEEK_SET);
>
> in Userspace, there is no retrigger in the sysFS, my driver is *not*
> called again. So I made a own sysfs_seek function, which does retrigger
> the driver ...
Hm, are you sure? Otherwise the poll() stuff would not work at all.
> Is this really wanted in the sysFS, that there is no way to retrigger a
> read?
Yes, use the sysfs poll/select stuff to do that.
And "sysfs" has no upper-case letters :)
thanks,
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
