Re: [PATCH] timekeeping: Prevent time going backwards on resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Patch below fixes the problem we were seeing (negative delta calculated 
in tick_do_update_jiffies64).

Thanks again Thomas!

On Wed, Sep 12, 2007 at 12:36:34AM +0200, Thomas Gleixner wrote:
> Timekeeping resume adjusts xtime by adding the slept time in seconds and
> resets the reference value of the clock source (clock->cycle_last).
> clock->cycle last is used to calculate the delta between the last xtime
> update and the readout of the clock source in __get_nsec_offset(). xtime
> plus the offset is the current time. The resume code ignores the delta
> which had already elapsed between the last xtime update and the actual
> time of suspend. If the suspend time is short, then we can see time
> going backwards on resume.
> 
> Suspend:
> offs_s = clock->read() - clock->cycle_last;
> now = xtime + offs_s;
> timekeeping_suspend_time = read_rtc();
> 
> Resume:
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
> 
> if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
> backwards.
> 
> Fix this by storing the offset from the last xtime update and add it to
> xtime during resume, when we reset clock->cycle_last:
> 
> sleep_time = read_rtc() - timekeeping_suspend_time;
> xtime.tv_sec += sleep_time;
> xtime += offs_s;	/* Fixup xtime offset at suspend time */
> clock->cycle_last = clock->read();
> offs_r = clock->read() - clock->cycle_last;
> now = xtime + offs_r;
> 
> Thanks to Marcelo for tracking this down on the OLPC and providing the
> necessary details to analyze the root cause.
> 
> Signed-off-by: Thomas Gleixner <[email protected]>
> 
> --- a/kernel/time/timekeeping.c
> +++ b/kernel/time/timekeeping.c
> @@ -280,6 +280,8 @@ void __init timekeeping_init(void)
>  static int timekeeping_suspended;
>  /* time in seconds when suspend began */
>  static unsigned long timekeeping_suspend_time;
> +/* xtime offset when we went into suspend */
> +static s64 timekeeping_suspend_offset;
>  
>  /**
>   * timekeeping_resume - Resumes the generic timekeeping subsystem.
> @@ -305,6 +307,8 @@ static int timekeeping_resume(struct sys_device *dev)
>  		wall_to_monotonic.tv_sec -= sleep_length;
>  		total_sleep_time += sleep_length;
>  	}
> +	/* Make sure that we have the correct xtime reference */
> +	timespec_add_ns(&xtime, timekeeping_suspend_offset);
>  	/* re-base the last cycle value */
>  	clock->cycle_last = clocksource_read(clock);
>  	clock->error = 0;
> @@ -326,6 +330,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
>  	unsigned long flags;
>  
>  	write_seqlock_irqsave(&xtime_lock, flags);
>  	timekeeping_suspended = 1;
> +	/* Get the current xtime offset */
> +	timekeeping_suspend_offset = __get_nsec_offset();
>  	timekeeping_suspend_time = read_persistent_clock();
>  	write_sequnlock_irqrestore(&xtime_lock, flags);
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux