Folkert van Heusden <[email protected]> writes:
> Hi,
>
> Maybe it is a nice enhancement for make menuconfig to more explicitly
> give a pop-up or so when someone selects for example a sata controller
> while no 'scsi-disk' support was selected?
This has also bitten me one or two times. A reasonable way would
be to just select SD automatically for !EMBEDDED
Here's a patch:
-Andi
Select BLK_DEV_SD for all SCSI/libata drivers
This avoid a common user mistake.
Signed-off-by: Andi Kleen <[email protected]>
Index: linux-2.6.23-rc1-misc/drivers/ata/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/ata/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/ata/Kconfig
@@ -42,6 +42,7 @@ config ATA_ACPI
config SATA_AHCI
tristate "AHCI SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for AHCI Serial ATA.
@@ -50,6 +51,7 @@ config SATA_AHCI
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Broadcom/Serverworks/Apple K2
@@ -59,6 +61,7 @@ config SATA_SVW
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for ICH5/6/7/8 Serial ATA
@@ -69,6 +72,7 @@ config ATA_PIIX
config SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
@@ -78,6 +82,7 @@ config SATA_MV
config SATA_NV
tristate "NVIDIA SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for NVIDIA Serial ATA.
@@ -86,6 +91,7 @@ config SATA_NV
config PDC_ADMA
tristate "Pacific Digital ADMA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Pacific Digital ADMA controllers
@@ -94,6 +100,7 @@ config PDC_ADMA
config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Pacific Digital Serial ATA QStor.
@@ -102,6 +109,7 @@ config SATA_QSTOR
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Promise Serial ATA TX2/TX4.
@@ -110,6 +118,7 @@ config SATA_PROMISE
config SATA_SX4
tristate "Promise SATA SX4 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
@@ -118,6 +127,7 @@ config SATA_SX4
config SATA_SIL
tristate "Silicon Image SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Silicon Image Serial ATA.
@@ -126,6 +136,7 @@ config SATA_SIL
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
@@ -134,6 +145,7 @@ config SATA_SIL24
config SATA_SIS
tristate "SiS 964/965/966/180 SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
select PATA_SIS
help
@@ -145,6 +157,7 @@ config SATA_SIS
config SATA_ULI
tristate "ULi Electronics SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for ULi Electronics SATA.
@@ -153,6 +166,7 @@ config SATA_ULI
config SATA_VIA
tristate "VIA SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for VIA Serial ATA.
@@ -161,6 +175,7 @@ config SATA_VIA
config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
@@ -169,12 +184,14 @@ config SATA_VITESSE
config SATA_INIC162X
tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for Initio 162x Serial ATA.
config PATA_ALI
tristate "ALi PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the ALi ATA interfaces
@@ -184,6 +201,7 @@ config PATA_ALI
config PATA_AMD
tristate "AMD/NVidia PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the AMD and NVidia PATA
@@ -193,6 +211,7 @@ config PATA_AMD
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for ARTOP PATA controllers.
@@ -201,6 +220,7 @@ config PATA_ARTOP
config PATA_ATIIXP
tristate "ATI PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the ATI ATA interfaces
@@ -210,6 +230,7 @@ config PATA_ATIIXP
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the CMD640 PCI IDE
@@ -220,6 +241,7 @@ config PATA_CMD640_PCI
config PATA_CMD64X
tristate "CMD64x PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI&& EXPERIMENTAL
help
This option enables support for the CMD64x series chips
@@ -229,6 +251,7 @@ config PATA_CMD64X
config PATA_CS5520
tristate "CS5510/5520 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the Cyrix 5510/5520
@@ -238,6 +261,7 @@ config PATA_CS5520
config PATA_CS5530
tristate "CS5530 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
@@ -247,6 +271,7 @@ config PATA_CS5530
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && X86 && !X86_64 && EXPERIMENTAL
help
This option enables support for the NatSemi/AMD CS5535
@@ -256,6 +281,7 @@ config PATA_CS5535
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the Cypress/Contaq CY82C693
@@ -265,6 +291,7 @@ config PATA_CYPRESS
config PATA_EFAR
tristate "EFAR SLC90E66 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the EFAR SLC90E66
@@ -274,6 +301,7 @@ config PATA_EFAR
config ATA_GENERIC
tristate "Generic ATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for generic BIOS configured
@@ -283,6 +311,7 @@ config ATA_GENERIC
config PATA_HPT366
tristate "HPT 366/368 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the HPT 366 and 368
@@ -292,6 +321,7 @@ config PATA_HPT366
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the majority of the later HPT
@@ -301,6 +331,7 @@ config PATA_HPT37X
config PATA_HPT3X2N
tristate "HPT 372N/302N PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the N variant HPT PATA
@@ -310,6 +341,7 @@ config PATA_HPT3X2N
config PATA_HPT3X3
tristate "HPT 343/363 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the HPT 343/363
@@ -327,6 +359,7 @@ config PATA_HPT3X3_DMA
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on EXPERIMENTAL && ISAPNP
help
This option enables support for ISA plug & play ATA
@@ -336,6 +369,7 @@ config PATA_ISAPNP
config PATA_IT821X
tristate "IT8211/2 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the ITE 8211 and 8212
@@ -346,6 +380,7 @@ config PATA_IT821X
config PATA_IT8213
tristate "IT8213 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the ITE 821 PATA
@@ -355,6 +390,7 @@ config PATA_IT8213
config PATA_JMICRON
tristate "JMicron PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
Enable support for the JMicron IDE controller, via the new
@@ -364,6 +400,7 @@ config PATA_JMICRON
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && EXPERIMENTAL
help
This option enables support for ISA/VLB bus legacy PATA
@@ -373,6 +410,7 @@ config PATA_LEGACY
config PATA_TRIFLEX
tristate "Compaq Triflex PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
Enable support for the Compaq 'Triflex' IDE controller as found
@@ -382,6 +420,7 @@ config PATA_TRIFLEX
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables limited support for the Marvell 88SE6145 ATA
@@ -391,6 +430,7 @@ config PATA_MARVELL
config PATA_MPC52xx
tristate "Freescale MPC52xx SoC internal IDE"
+ select BLK_DEV_SD if !EMBEDDED
depends on PPC_MPC52xx
help
This option enables support for integrated IDE controller
@@ -400,6 +440,7 @@ config PATA_MPC52xx
config PATA_MPIIX
tristate "Intel PATA MPIIX support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for MPIIX PATA support.
@@ -408,6 +449,7 @@ config PATA_MPIIX
config PATA_OLDPIIX
tristate "Intel PATA old PIIX support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for early PIIX PATA support.
@@ -416,6 +458,7 @@ config PATA_OLDPIIX
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the Netcell Revolution RAID
@@ -425,6 +468,7 @@ config PATA_NETCELL
config PATA_NS87410
tristate "Nat Semi NS87410 PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the National Semiconductor
@@ -434,6 +478,7 @@ config PATA_NS87410
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables full PIO support for the early Opti ATA
@@ -443,6 +488,7 @@ config PATA_OPTI
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables DMA/PIO support for the later OPTi
@@ -462,6 +508,7 @@ config PATA_PCMCIA
config PATA_PDC_OLD
tristate "Older Promise PATA controller support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the Promise 20246, 20262, 20263,
@@ -471,12 +518,14 @@ config PATA_PDC_OLD
config PATA_QDI
tristate "QDI VLB PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the RADISYS 82600
@@ -486,6 +535,7 @@ config PATA_RADISYS
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables basic support for the PC Tech RZ1000/1
@@ -495,6 +545,7 @@ config PATA_RZ1000
config PATA_SC1200
tristate "SC1200 PATA support (Very Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for the NatSemi/AMD SC1200 SoC
@@ -504,6 +555,7 @@ config PATA_SC1200
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
@@ -513,6 +565,7 @@ config PATA_SERVERWORKS
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
@@ -521,6 +574,7 @@ config PATA_PDC2027X
config PATA_SIL680
tristate "CMD / Silicon Image 680 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for CMD / Silicon Image 680 PATA.
@@ -529,6 +583,7 @@ config PATA_SIL680
config PATA_SIS
tristate "SiS PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && EXPERIMENTAL
help
This option enables support for SiS PATA controllers
@@ -537,6 +592,7 @@ config PATA_SIS
config PATA_VIA
tristate "VIA PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for the VIA PATA interfaces
@@ -546,6 +602,7 @@ config PATA_VIA
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
help
This option enables support for SL82C105 PATA devices found in the
@@ -555,6 +612,7 @@ config PATA_WINBOND
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && EXPERIMENTAL
help
Support for the Winbond W83759A controller on Vesa Local Bus
@@ -562,6 +620,7 @@ config PATA_WINBOND_VLB
config PATA_PLATFORM
tristate "Generic platform device PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on EMBEDDED || ARCH_RPC
help
This option enables support for generic directly connected ATA
@@ -571,6 +630,7 @@ config PATA_PLATFORM
config PATA_ICSIDE
tristate "Acorn ICS PATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARM && ARCH_ACORN
help
On Acorn systems, say Y here if you wish to use the ICS PATA
@@ -579,6 +639,7 @@ config PATA_ICSIDE
config PATA_IXP4XX_CF
tristate "IXP4XX Compact Flash support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_IXP4XX
help
This option enables support for a Compact Flash connected on
@@ -589,6 +650,7 @@ config PATA_IXP4XX_CF
config PATA_SCC
tristate "Toshiba's Cell Reference Set IDE support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && PPC_CELLEB
help
This option enables support for the built-in IDE controller on
Index: linux-2.6.23-rc1-misc/drivers/scsi/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/Kconfig
@@ -305,6 +305,7 @@ config ISCSI_TCP
select CRYPTO_MD5
select CRYPTO_CRC32C
select SCSI_ISCSI_ATTRS
+ select BLK_DEV_SD if !EMBEDDED
help
The iSCSI Driver provides a host with the ability to access storage
through an IP network. The driver uses the iSCSI protocol to transport
@@ -325,6 +326,7 @@ config ISCSI_TCP
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
depends on SGI_IP22 && SCSI
+ select BLK_DEV_SD if !EMBEDDED
help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
@@ -332,16 +334,19 @@ config SGIWD93_SCSI
config SCSI_DECNCR
tristate "DEC NCR53C94 Scsi Driver"
depends on MACH_DECSTATION && SCSI && TC
+ select BLK_DEV_SD if !EMBEDDED
help
Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
+ select BLK_DEV_SD if !EMBEDDED
depends on MACH_DECSTATION && SCSI && 32BIT
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
3ware is the only hardware ATA-Raid product in Linux to date.
@@ -355,6 +360,7 @@ config BLK_DEV_3W_XXXX_RAID
config SCSI_3W_9XXX
tristate "3ware 9xxx SATA-RAID support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
This driver supports the 9000 series 3ware SATA-RAID cards.
@@ -366,6 +372,7 @@ config SCSI_3W_9XXX
config SCSI_7000FASST
tristate "7000FASST SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI && ISA_DMA_API
help
This driver supports the Western Digital 7000 SCSI host adapter
@@ -377,6 +384,7 @@ config SCSI_7000FASST
config SCSI_ACARD
tristate "ACARD SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
This driver supports the ACARD SCSI host adapter.
@@ -387,6 +395,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
+ select BLK_DEV_SD if !EMBEDDED
select SCSI_SPI_ATTRS
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
@@ -402,6 +411,7 @@ config SCSI_AHA152X
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for a SCSI host adapter. It is explained in section
@@ -416,6 +426,7 @@ config SCSI_AHA1542
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on EISA && SCSI
---help---
This is support for a SCSI host adapter. It is explained in section
@@ -429,6 +440,7 @@ config SCSI_AHA1740
config SCSI_AACRAID
tristate "Adaptec AACRAID support"
+ select BLK_DEV_SD if !EMBEDDED
depends on SCSI && PCI
help
This driver supports a variety of Dell, HP, Adaptec, IBM and
@@ -443,6 +455,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
+ select BLK_DEV_SD if !EMBEDDED
depends on (ISA || EISA || PCI ) && SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
@@ -487,6 +500,7 @@ source "drivers/scsi/aic94xx/Kconfig"
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
+ select BLK_DEV_SD if !EMBEDDED
depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
help
This driver supports all of Adaptec's I2O based RAID controllers as
@@ -501,6 +515,7 @@ config SCSI_ADVANSYS
depends on SCSI
depends on ISA || EISA || PCI
depends on BROKEN || X86_32
+ select BLK_DEV_SD if !EMBEDDED
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
@@ -512,6 +527,7 @@ config SCSI_ADVANSYS
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
depends on ISA && SCSI
+ select BLK_DEV_SD if !EMBEDDED
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
@@ -524,6 +540,7 @@ config SCSI_IN2000
config SCSI_ARCMSR
tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
depends on PCI && SCSI
+ select BLK_DEV_SD if !EMBEDDED
help
This driver supports all of ARECA's SATA RAID controller cards.
This is an ARECA-maintained driver by Erich Chen.
@@ -540,6 +557,7 @@ source "drivers/scsi/megaraid/Kconfig.me
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx Controller support"
depends on SCSI && PCI
+ select BLK_DEV_SD if !EMBEDDED
help
This option enables support for HighPoint RocketRAID 3xxx
controllers.
@@ -549,6 +567,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
@@ -563,6 +582,7 @@ config SCSI_BUSLOGIC
config SCSI_OMIT_FLASHPOINT
bool "Omit FlashPoint support"
depends on SCSI_BUSLOGIC
+ select BLK_DEV_SD if !EMBEDDED
help
This option allows you to omit the FlashPoint support from the
BusLogic SCSI driver. The FlashPoint SCCB Manager code is
@@ -573,6 +593,7 @@ config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
+ select BLK_DEV_SD if !EMBEDDED
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -583,6 +604,7 @@ config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
+ select BLK_DEV_SD if !EMBEDDED
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -595,6 +617,7 @@ config SCSI_DTC3280
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ select BLK_DEV_SD if !EMBEDDED
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -656,6 +679,7 @@ config SCSI_EATA_PIO
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
+ select BLK_DEV_SD if !EMBEDDED
depends on (ISA || PCI) && SCSI
---help---
This is support for Future Domain's 16-bit SCSI host adapters
@@ -675,6 +699,7 @@ config SCSI_FUTURE_DOMAIN
config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on MCA_LEGACY && SCSI
---help---
This is support for Future Domain MCS 600/700 MCA SCSI adapters.
@@ -688,6 +713,7 @@ config SCSI_FD_MCS
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
+ select BLK_DEV_SD if !EMBEDDED
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
Formerly called GDT SCSI Disk Array Controller Support.
@@ -702,6 +728,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -722,6 +749,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -748,6 +776,7 @@ config SCSI_GENERIC_NCR53C400
config SCSI_IBMMCA
tristate "IBMMCA SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on MCA && SCSI
---help---
This is support for the IBM SCSI adapter found in many of the PS/2
@@ -818,6 +847,7 @@ config IBMMCA_SCSI_DEV_RESET
config SCSI_IPS
tristate "IBM ServeRAID support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
---help---
This is support for the IBM ServeRAID hardware RAID controllers.
@@ -831,6 +861,7 @@ config SCSI_IPS
config SCSI_IBMVSCSI
tristate "IBM Virtual SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PPC_PSERIES || PPC_ISERIES
help
This is the IBM POWER Virtual SCSI Client
@@ -840,6 +871,7 @@ config SCSI_IBMVSCSI
config SCSI_IBMVSCSIS
tristate "IBM Virtual SCSI Server support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
help
This is the SRP target driver for IBM pSeries virtual environments.
@@ -854,6 +886,7 @@ config SCSI_IBMVSCSIS
config SCSI_INITIO
tristate "Initio 9100U(W) support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
@@ -865,6 +898,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
@@ -876,6 +910,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
+ select BLK_DEV_SD if !EMBEDDED
depends on SCSI && PARPORT_PC
---help---
This driver supports older versions of IOMEGA's parallel port ZIP
@@ -903,6 +938,7 @@ config SCSI_PPA
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
+ select BLK_DEV_SD if !EMBEDDED
depends on SCSI && PARPORT_PC
---help---
This driver supports newer versions of IOMEGA's parallel port ZIP
@@ -959,6 +995,7 @@ config SCSI_IZIP_SLOW_CTR
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
help
This is support for the NCR53c406a SCSI host adapter. For user
@@ -971,6 +1008,7 @@ config SCSI_NCR53C406A
config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on MCA && SCSI
select SCSI_SPI_ATTRS
help
@@ -983,6 +1021,7 @@ config SCSI_NCR_D700
config SCSI_LASI700
tristate "HP Lasi SCSI support for 53c700/710"
+ select BLK_DEV_SD if !EMBEDDED
depends on GSC && SCSI
select SCSI_SPI_ATTRS
help
@@ -992,6 +1031,7 @@ config SCSI_LASI700
config SCSI_SNI_53C710
tristate "SNI RM SCSI support for 53c710"
+ select BLK_DEV_SD if !EMBEDDED
depends on SNI_RM && SCSI
select SCSI_SPI_ATTRS
select 53C700_LE_ON_BE
@@ -1006,6 +1046,7 @@ config 53C700_LE_ON_BE
config SCSI_STEX
tristate "Promise SuperTrak EX Series support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
---help---
This driver supports Promise SuperTrak EX series storage controllers.
@@ -1023,6 +1064,7 @@ config 53C700_BE_BUS
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -1090,6 +1132,7 @@ config SCSI_SYM53C8XX_MMIO
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && ATA
select FW_LOADER
---help---
@@ -1117,6 +1160,7 @@ config SCSI_IPR_DUMP
config SCSI_ZALON
tristate "Zalon SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on GSC && SCSI
select SCSI_SPI_ATTRS
help
@@ -1128,6 +1172,7 @@ config SCSI_ZALON
config SCSI_NCR_Q720
tristate "NCR Quad 720 MCA SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on MCA && SCSI
select SCSI_SPI_ATTRS
help
@@ -1227,6 +1272,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
@@ -1238,6 +1284,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -1263,6 +1310,7 @@ config SCSI_PSI240I
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
@@ -1291,6 +1339,7 @@ config SCSI_QLOGIC_FC_FIRMWARE
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
@@ -1300,6 +1349,7 @@ config SCSI_QLOGIC_1280
config SCSI_QLOGICPTI
tristate "PTI Qlogic, ISP Driver"
+ select BLK_DEV_SD if !EMBEDDED
depends on SBUS && SCSI
help
This driver supports SBUS SCSI controllers from PTI or QLogic. These
@@ -1315,6 +1365,7 @@ source "drivers/scsi/qla4xxx/Kconfig"
config SCSI_LPFC
tristate "Emulex LightPulse Fibre Channel Support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
select SCSI_FC_ATTRS
help
@@ -1323,6 +1374,7 @@ config SCSI_LPFC
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on X86 && ISA && SCSI
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
@@ -1337,6 +1389,7 @@ config SCSI_SEAGATE
# definitely looks not 64bit safe:
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
+ select BLK_DEV_SD if !EMBEDDED
depends on (EISA || MCA) && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -1346,6 +1399,7 @@ config SCSI_SIM710
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
@@ -1364,6 +1418,7 @@ config SCSI_SYM53C416
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && EXPERIMENTAL
---help---
This driver supports PCI SCSI host adapters based on the ASIC
@@ -1379,6 +1434,7 @@ config SCSI_DC395x
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
@@ -1395,6 +1451,7 @@ config SCSI_DC390T
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -1411,6 +1468,7 @@ config SCSI_T128
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
@@ -1460,6 +1518,7 @@ config SCSI_U14_34F_MAX_TAGS
config SCSI_ULTRASTOR
tristate "UltraStor SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on X86 && ISA && SCSI
---help---
This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
@@ -1477,6 +1536,7 @@ config SCSI_ULTRASTOR
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && !64BIT
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
@@ -1501,6 +1561,7 @@ config SCSI_DEBUG
config SCSI_MESH
tristate "MESH (Power Mac internal SCSI) support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PPC32 && PPC_PMAC && SCSI
help
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
@@ -1555,6 +1616,7 @@ config JAZZ_ESP
config A3000_SCSI
tristate "A3000 WD33C93A support"
+ select BLK_DEV_SD if !EMBEDDED
depends on AMIGA && SCSI
help
If you have an Amiga 3000 and have SCSI devices connected to the
@@ -1565,6 +1627,7 @@ config A3000_SCSI
config A2091_SCSI
tristate "A2091/A590 WD33C93A support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
@@ -1575,6 +1638,7 @@ config A2091_SCSI
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
---help---
If you have a Great Valley Products Series II SCSI controller,
@@ -1588,6 +1652,7 @@ config GVP11_SCSI
config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have an Amiga with an original (MkI) Phase5 Cyberstorm
@@ -1596,6 +1661,7 @@ config CYBERSTORM_SCSI
config CYBERSTORMII_SCSI
tristate "CyberStorm Mk II SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
@@ -1604,6 +1670,7 @@ config CYBERSTORMII_SCSI
config BLZ2060_SCSI
tristate "Blizzard 2060 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
@@ -1612,6 +1679,7 @@ config BLZ2060_SCSI
config BLZ1230_SCSI
tristate "Blizzard 1230IV/1260 SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
@@ -1620,6 +1688,7 @@ config BLZ1230_SCSI
config FASTLANE_SCSI
tristate "Fastlane SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI
help
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
@@ -1627,6 +1696,7 @@ config FASTLANE_SCSI
config SCSI_A4000T
tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on AMIGA && SCSI && EXPERIMENTAL
select SCSI_SPI_ATTRS
help
@@ -1638,6 +1708,7 @@ config SCSI_A4000T
config SCSI_ZORRO7XX
tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI && EXPERIMENTAL
select SCSI_SPI_ATTRS
help
@@ -1654,6 +1725,7 @@ config SCSI_ZORRO7XX
config OKTAGON_SCSI
tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ZORRO && SCSI && EXPERIMENTAL
help
If you have the BSC Oktagon SCSI disk controller for the Amiga, say
@@ -1663,6 +1735,7 @@ config OKTAGON_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ATARI && SCSI
select SCSI_SPI_ATTRS
---help---
@@ -1715,6 +1788,7 @@ config MAC_SCSI
config SCSI_MAC_ESP
tristate "Macintosh NCR53c9[46] SCSI"
+ select BLK_DEV_SD if !EMBEDDED
depends on MAC && SCSI
help
This is the NCR 53c9x SCSI controller found on most of the 68040
@@ -1735,6 +1809,7 @@ config MVME147_SCSI
config MVME16x_SCSI
tristate "NCR53C710 SCSI driver for MVME16x"
+ select BLK_DEV_SD if !EMBEDDED
depends on MVME16x && SCSI
select SCSI_SPI_ATTRS
help
@@ -1744,6 +1819,7 @@ config MVME16x_SCSI
config BVME6000_SCSI
tristate "NCR53C710 SCSI driver for BVME6000"
+ select BLK_DEV_SD if !EMBEDDED
depends on BVME6000 && SCSI
select SCSI_SPI_ATTRS
help
@@ -1753,6 +1829,7 @@ config BVME6000_SCSI
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
+ select BLK_DEV_SD if !EMBEDDED
depends on SUN3 && SCSI
select SCSI_SPI_ATTRS
help
@@ -1771,6 +1848,7 @@ config SUN3X_ESP
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
+ select BLK_DEV_SD if !EMBEDDED
depends on SBUS && SCSI
select SCSI_SPI_ATTRS
help
@@ -1782,6 +1860,7 @@ config SCSI_SUNESP
config ZFCP
tristate "FCP host bus adapter driver for IBM eServer zSeries"
+ select BLK_DEV_SD if !EMBEDDED
depends on S390 && QDIO && SCSI
select SCSI_FC_ATTRS
help
@@ -1796,6 +1875,7 @@ config ZFCP
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
+ select BLK_DEV_SD if !EMBEDDED
depends on SCSI && PCI
select SCSI_TGT
help
Index: linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic79xx
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -4,6 +4,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
select SCSI_SPI_ATTRS
help
Index: linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic7xxx
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ linux-2.6.23-rc1-misc/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -4,6 +4,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support (New Driver)"
+ select BLK_DEV_SD if !EMBEDDED
depends on (PCI || EISA) && SCSI
select SCSI_SPI_ATTRS
---help---
Index: linux-2.6.23-rc1-misc/drivers/scsi/aic94xx/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/aic94xx/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/aic94xx/Kconfig
@@ -26,6 +26,7 @@
config SCSI_AIC94XX
tristate "Adaptec AIC94xx SAS/SATA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI
select SCSI_SAS_LIBSAS
select FW_LOADER
Index: linux-2.6.23-rc1-misc/drivers/scsi/arm/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/arm/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/arm/Kconfig
@@ -3,6 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && SCSI && BROKEN
select SCSI_SPI_ATTRS
help
@@ -32,6 +33,7 @@ config SCSI_ACORNSCSI_SYNC
config SCSI_ARXESCSI
tristate "ARXE SCSI support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && SCSI
help
Around 1991, Arxe Systems Limited released a high density floppy
@@ -44,6 +46,7 @@ config SCSI_ARXESCSI
config SCSI_CUMANA_2
tristate "CumanaSCSI II support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && SCSI
help
This enables support for the Cumana SCSI II card. If you have an
@@ -51,6 +54,7 @@ config SCSI_CUMANA_2
config SCSI_EESOXSCSI
tristate "EESOX support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && SCSI
help
This enables support for the EESOX SCSI card. If you have an Acorn
@@ -58,6 +62,7 @@ config SCSI_EESOXSCSI
config SCSI_POWERTECSCSI
tristate "PowerTec support"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && SCSI
help
This enables support for the Powertec SCSI card on Acorn systems. If
@@ -68,6 +73,7 @@ comment "The following drivers are not f
config SCSI_CUMANA_1
tristate "CumanaSCSI I support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && EXPERIMENTAL && SCSI
select SCSI_SPI_ATTRS
help
@@ -76,6 +82,7 @@ config SCSI_CUMANA_1
config SCSI_ECOSCSI
tristate "EcoScsi support (EXPERIMENTAL)"
+ select BLK_DEV_SD if !EMBEDDED
depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
select SCSI_SPI_ATTRS
help
Index: linux-2.6.23-rc1-misc/drivers/scsi/megaraid/Kconfig.megaraid
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/megaraid/Kconfig.megaraid
+++ linux-2.6.23-rc1-misc/drivers/scsi/megaraid/Kconfig.megaraid
@@ -6,6 +6,7 @@ config MEGARAID_NEWGEN
config MEGARAID_MM
tristate "LSI Logic Management Module (New Driver)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && MEGARAID_NEWGEN
help
Management Module provides ioctl, sysfs support for LSI Logic
@@ -16,6 +17,7 @@ config MEGARAID_MM
config MEGARAID_MAILBOX
tristate "LSI Logic MegaRAID Driver (New Driver)"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && MEGARAID_MM
help
List of supported controllers
@@ -77,6 +79,7 @@ config MEGARAID_LEGACY
config MEGARAID_SAS
tristate "LSI Logic MegaRAID SAS RAID Module"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
help
Module for LSI Logic's SAS based RAID controllers.
Index: linux-2.6.23-rc1-misc/drivers/scsi/pcmcia/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/pcmcia/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/pcmcia/Kconfig
@@ -10,6 +10,7 @@ if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCI
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on !64BIT
select SCSI_SPI_ATTRS
help
@@ -21,6 +22,7 @@ config PCMCIA_AHA152X
config PCMCIA_FDOMAIN
tristate "Future Domain PCMCIA support"
+ select BLK_DEV_SD if !EMBEDDED
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
@@ -30,6 +32,7 @@ config PCMCIA_FDOMAIN
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
+ select BLK_DEV_SD if !EMBEDDED
depends on !64BIT
help
If you intend to attach this type of PCMCIA SCSI host adapter to
@@ -64,6 +67,7 @@ config PCMCIA_NINJA_SCSI
config PCMCIA_QLOGIC
tristate "Qlogic PCMCIA support"
+ select BLK_DEV_SD if !EMBEDDED
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
@@ -73,6 +77,7 @@ config PCMCIA_QLOGIC
config PCMCIA_SYM53C500
tristate "Symbios 53c500 PCMCIA support"
+ select BLK_DEV_SD if !EMBEDDED
help
Say Y here if you have a New Media Bus Toaster or other PCMCIA
SCSI adapter based on the Symbios 53c500 controller.
Index: linux-2.6.23-rc1-misc/drivers/scsi/qla2xxx/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/qla2xxx/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/qla2xxx/Kconfig
@@ -1,5 +1,6 @@
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI
select SCSI_FC_ATTRS
select FW_LOADER
Index: linux-2.6.23-rc1-misc/drivers/scsi/qla4xxx/Kconfig
===================================================================
--- linux-2.6.23-rc1-misc.orig/drivers/scsi/qla4xxx/Kconfig
+++ linux-2.6.23-rc1-misc/drivers/scsi/qla4xxx/Kconfig
@@ -1,5 +1,6 @@
config SCSI_QLA_ISCSI
tristate "QLogic ISP4XXX host adapter family support"
+ select BLK_DEV_SD if !EMBEDDED
depends on PCI && SCSI && NET
select SCSI_ISCSI_ATTRS
---help---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
