anyone come up with a patch/fix for this?
i also tried this drive on the system ide ports and it worked fine (also
uses libata drivers, nforce2), it seems to be something wrong in the
"pata_pdc202xx_old" code.
what can i do to get this fixed?
the drive is a seagate.
i dont know what res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA
bus error) means
this is a really strange and hard to reproduce bug since all my other drives
work (all maxtors , and one wd) just the seagate gets this error (and only
on the PDC20267 card)
thanks.
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/100
ata3: EH complete
sd 2:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB)
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/100
ata3: EH complete
sd 2:0:0:0: [sde] Write Protect is off
sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
ata3.00: limiting speed to UDMA/66:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/66
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/66
ata3: EH complete
sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out
res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/66
sd 2:0:0:0: [sde] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sde] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 3f
sd 2:0:0:0: [sde] ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sde, sector 63
ata3: EH complete
sd 2:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB)
Filesystem "sde1": Disabling barriers, trial barrier write failed
sd 2:0:0:0: [sde] Write Protect is off
sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
XFS mounting filesystem sde1
sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sde] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sde] Write Protect is off
sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/66
ata3: EH complete
ata3.00: limiting speed to UDMA/33:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b6:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b6:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sde] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sde] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
06 fc b6 17
sd 2:0:0:0: [sde] ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sde, sector 117224983
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata3.00: (BMDMA stat 0x4)
ata3.00: cmd ca/00:00:17:b7:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072
out
res 51/84:00:17:b7:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata3: soft resetting port
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sde] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sde] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
06 fc b7 17
sd 2:0:0:0: [sde] ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sde, sector 117225239
ata3: EH complete
xfs_force_shutdown(sde1,0x1) called from line 423 of file fs/xfs/xfs_rw.c.
Return address = 0xc01e6258
Filesystem "sde1": I/O Error Detected. Shutting down filesystem: sde1
Please umount the filesystem, and rectify the problem(s)
I/O error in filesystem ("sde1") meta-data dev sde1 block 0x6fcb5d8
("xlog_bwrite") error 5 buf count 262144
XFS: failed to locate log tail
XFS: log mount/recovery failed: error 5
XFS: log mount failed
----------------------------------------------------------------------
Get a free email account with anti spam protection.
http://www.bluebottle.com/tag/2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
