Hello, My conf is: Slackware 12.0 2.6.22.5 vanilla kernel with: Device Drivers -> Block Devices -> Large Block Device Filesystems -> Partition Types -> Advanced partition selection Filesystems -> Partition Types -> EFI GUID Partition support HP DL 320 G5 1GB and Infortrend EonStor A08U-G2421 array (3TB) root@neso:~# lspci 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev c0) 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev c0) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) 01:04.4 USB Controller: Hewlett-Packard Company Unknown device 3300 01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Unknown device 3302 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3) 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 Gigabit Ethernet (rev a3) 03:08.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b4) 07:00.0 PCI bridge: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge (rev bb) 08:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev c1) 0a:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 03) On array i have two partitions (400GB /dev/sda1 and above 2.4TB /dev/sda2). I made partitions using parted. First i used reiserfs and then ext3, but in my logs i have: Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=3252420632, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=3252420632, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=203276289, block=406552578 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=203276289, block=406552578 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=1533280280, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=1533280280, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=95830017, block=191660034 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=95830017, block=191660034 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=4507303960, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=4507303960, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=281706497, block=563412994 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=281706497, block=563412994 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2144075800, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2144075800, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=134004737, block=268009474 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=134004737, block=268009474 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2243952664, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2243952664, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=140247041, block=280494082 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=140247041, block=280494082 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=734527512, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=734527512, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=45907969, block=91815938 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=45907969, block=91815938 Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: attempt to access beyond end of device Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2565865496, limit=583941074 Aug 31 15:54:14 neso kernel: sda2: rw=32, want=2565865496, limit=583941074 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=160366593, block=320733186 Aug 31 15:54:14 neso kernel: EXT3-fs error (device sda2): ext3_get_inode_loc: unable to read inode block - inode=160366593, block=320733186 Any idea ? ps. .config is in attach. -- Best regards, Daniel Chojecki
Attachment:
config
Description: Binary data
- Prev by Date: Re: [patch 3/5] x86: Add PCI extended config space access for AMD Barcelona
- Next by Date: Re: 2.6.23-rc4-mm1: boot failure on HPC nx6325
- Previous by thread: [patch 0/5] (resent) x86: PCI extended config space access on AMD Barcelona CPUs
- Next by thread: Relevant mailing list
- Index(es):
 |