I'll look at this again on my next weekend and make the changes.
If it exists I'd rather it functioned without issues. My initrds are
created by gentoo's genkernel script, which places dmraid on them.
I'm not sure if it supports autodetect or not.
On 8/24/07, Neil Brown <[email protected]> wrote:
> On Wednesday August 22, [email protected] wrote:
> > From: Michael J. Evans <[email protected]>
> >
> > In current release kernels the md module (Software RAID) uses a static array
> > (dev_t[128]) to store partition/device info temporarily for autostart.
> >
> > This patch replaces that static array with a list.
>
> I must admit that I'm not very keen on this.
> I would much rather that in-kernel autodetect were deprecated rather
> than enhanced.
>
> Just use 'mdadm' in an initrd, or during normal boot, to assemble all
> your arrays.
>
> However.....
>
> > =============================================================
> > --- linux/drivers/md/md.c.orig 2007-08-21 03:19:42.511576248 -0700
> > +++ linux/drivers/md/md.c 2007-08-21 04:30:09.775525710 -0700
> > @@ -24,4 +24,6 @@
> >
> > + - autodetect dev list not array: Michael J. Evans <[email protected]>
> > +
> > This program is free software; you can redistribute it and/or modify
> > it under the terms of the GNU General Public License as published by
> > the Free Software Foundation; either version 2, or (at your option)
> > @@ -5752,13 +5754,25 @@ void md_autodetect_dev(dev_t dev)
> > * Searches all registered partitions for autorun RAID arrays
> > * at boot time.
> > */
> > -static dev_t detected_devices[128];
> > -static int dev_cnt;
> > +
> > +static LIST_HEAD(all_detected_devices);
> > +/* FIXME : Should these 4 lines instead go in to include/linux/raid/md_k.h ?
>
> No. No-one outside this file uses them, so they are fine where they
> are.
>
> > */
> > +struct detected_devices_node {
> > + struct list_head list;
> > + dev_t dev;
> > +};
> >
> > void md_autodetect_dev(dev_t dev)
> > {
> > - if (dev_cnt >= 0 && dev_cnt < 127)
> > - detected_devices[dev_cnt++] = dev;
> > + struct detected_devices_node *node_detected_dev;
> > + node_detected_dev = kzalloc(sizeof(*node_detected_dev), GFP_KERNEL);\
> > + if (node_detected_dev) {
> > + node_detected_dev->dev = dev;
> > + list_add(&node_detected_dev->list, &all_detected_devices);
>
> Probably list_add_tail would be better so the ordering is the same as
> it was before?
>
>
> > + } else {
> > + printk(KERN_CRIT "md: kzAlloc node failed, skipping device."
> > + " : 0x%p.\n", node_detected_dev);
> > + }
>
>
>
> > }
> >
> >
> > @@ -5765,7 +5779,13 @@ static void autostart_arrays(int part)
> > static void autostart_arrays(int part)
> > {
> > mdk_rdev_t *rdev;
> > - int i;
> > + struct detected_devices_node *node_detected_dev;
> > + dev_t dev;
> > + int i_scanned, i_passed, i_loops;
> > + signed int i_found;
> > + i_scanned = 0;
> > + i_passed = 0;
> > + i_loops = 0;
>
> i_passed is never used.
>
> And what is the point of i_loops (and i_scanned)? The comments
> at the top of the patch should explain this if there is a good reason.
>
> >
> > printk(KERN_INFO "md: Autodetecting RAID arrays.\n");
> >
> > @@ -5772,3 +5792,11 @@ static void autostart_arrays(int part)
> > - for (i = 0; i < dev_cnt; i++) {
> > - dev_t dev = detected_devices[i];
> > -
> > + /* FIXME: max 'int' #DEFINEd somewhere? not 0x7FFFFFFF ? */
> > + while (!list_empty(&all_detected_devices) && i_loops < 0x7FFFFFFF) {
> > + i_scanned++;
> > + node_detected_dev = NULL;
> > + node_detected_dev = list_entry(all_detected_devices.next,
> > + struct detected_devices_node, list);
> > + if (node_detected_dev) {
>
> list_entry will *never* return NULL. It simply doesn't pointer
> arithmetic. (Well, I guess it could return NULL if it was passed
> NULL, and the struct-offset were 0, but that isn't the case here).
>
> So you don't need this 'if' at all.
>
> > + list_del(&node_detected_dev->list);
> > + dev = node_detected_dev->dev;
> > + kfree(node_detected_dev);
> > + /* Indent is now off by one, but the old code is after this. */
>
> so you don't need to worrying about indents.
>
>
> > @@ -5781,8 +5809,16 @@ static void autostart_arrays(int part)
> > continue;
> > }
> > list_add(&rdev->same_set, &pending_raid_disks);
> > + /* Indent is now off by one, but the old code is above this. */
> > +
> > + } else {
> > + printk(KERN_CRIT "md: Invalid list node, skipping.\n");
> > + }
> > + i_loops++;
> > }
> > - dev_cnt = 0;
> > +
> > + printk(KERN_INFO "md: Passes %d : Scanned %d and added %d devices.\n",
> > + i_loops, i_scanned, i_passed);
> >
> > autorun_devices(part);
> > }
>
>
> I'm not dead-set against the change, and if you tidy it up I'll
> probably accept it, but I really think you would be better off skipping
> the in-kernel autodetect stuff altogether and use mdadm to assemble
> your arrays.
>
> NeilBrown
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
