diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index af50f9b..026e4e5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -850,11 +850,6 @@ and is between 256 and 4096 characters. It is defined in the file
lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip
Format: addr:<io>,irq:<irq>
- legacy_serial.force [HW,IA-32,X86-64]
- Probe for COM ports at legacy addresses even
- if PNPBIOS or ACPI should describe them. This
- is for working around firmware defects.
-
llsc*= [IA64] See function print_params() in
arch/ia64/sn/kernel/llsc4.c.
diff --git a/Makefile b/Makefile
index f2a62ee..5d2a660 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 22
-EXTRAVERSION = .4
+EXTRAVERSION = .5
NAME = Holy Dancing Manatees, Batman!
# *DOCUMENTATION*
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index bd28f9f..541b3ae 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -51,8 +51,8 @@ cflags-y += -maccumulate-outgoing-args
CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
# is .cfi_signal_frame supported too?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 06da59f..e9297cb 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -35,7 +35,6 @@ obj-y += sysenter.o vsyscall.o
obj-$(CONFIG_ACPI_SRAT) += srat.o
obj-$(CONFIG_EFI) += efi.o efi_stub.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
-obj-$(CONFIG_SERIAL_8250) += legacy_serial.o
obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
diff --git a/arch/i386/kernel/cpu/perfctr-watchdog.c b/arch/i386/kernel/cpu/perfctr-watchdog.c
index 4d26d51..996f6f8 100644
--- a/arch/i386/kernel/cpu/perfctr-watchdog.c
+++ b/arch/i386/kernel/cpu/perfctr-watchdog.c
@@ -346,7 +346,9 @@ static int setup_p6_watchdog(unsigned nmi_hz)
perfctr_msr = MSR_P6_PERFCTR0;
evntsel_msr = MSR_P6_EVNTSEL0;
- wrmsrl(perfctr_msr, 0UL);
+ /* KVM doesn't implement this MSR */
+ if (wrmsr_safe(perfctr_msr, 0, 0) < 0)
+ return 0;
evntsel = P6_EVNTSEL_INT
| P6_EVNTSEL_OS
diff --git a/arch/i386/kernel/doublefault.c b/arch/i386/kernel/doublefault.c
index 265c559..40978af 100644
--- a/arch/i386/kernel/doublefault.c
+++ b/arch/i386/kernel/doublefault.c
@@ -13,7 +13,7 @@
static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE];
#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE)
-#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + 0x1000000)
+#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM)
static void doublefault_fn(void)
{
@@ -23,23 +23,23 @@ static void doublefault_fn(void)
store_gdt(&gdt_desc);
gdt = gdt_desc.address;
- printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size);
+ printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size);
if (ptr_ok(gdt)) {
gdt += GDT_ENTRY_TSS << 3;
tss = *(u16 *)(gdt+2);
tss += *(u8 *)(gdt+4) << 16;
tss += *(u8 *)(gdt+7) << 24;
- printk("double fault, tss at %08lx\n", tss);
+ printk(KERN_EMERG "double fault, tss at %08lx\n", tss);
if (ptr_ok(tss)) {
struct i386_hw_tss *t = (struct i386_hw_tss *)tss;
- printk("eip = %08lx, esp = %08lx\n", t->eip, t->esp);
+ printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", t->eip, t->esp);
- printk("eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n",
+ printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n",
t->eax, t->ebx, t->ecx, t->edx);
- printk("esi = %08lx, edi = %08lx\n",
+ printk(KERN_EMERG "esi = %08lx, edi = %08lx\n",
t->esi, t->edi);
}
}
@@ -63,6 +63,7 @@ struct tss_struct doublefault_tss __cacheline_aligned = {
.cs = __KERNEL_CS,
.ss = __KERNEL_DS,
.ds = __USER_DS,
+ .fs = __KERNEL_PERCPU,
.__cr3 = __pa(swapper_pg_dir)
}
diff --git a/arch/i386/kernel/legacy_serial.c b/arch/i386/kernel/legacy_serial.c
deleted file mode 100644
index 2151011..0000000
--- a/arch/i386/kernel/legacy_serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Legacy COM port devices for x86 platforms without PNPBIOS or ACPI.
- * Data taken from include/asm-i386/serial.h.
- *
- * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
- * Bjorn Helgaas <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pnp.h>
-#include <linux/serial_8250.h>
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
-#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
-#else
-#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-#define COM4_FLAGS UPF_BOOT_AUTOCONF
-#endif
-
-#define PORT(_base,_irq,_flags) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = _flags, \
- }
-
-static struct plat_serial8250_port x86_com_data[] = {
- PORT(0x3F8, 4, COM_FLAGS),
- PORT(0x2F8, 3, COM_FLAGS),
- PORT(0x3E8, 4, COM_FLAGS),
- PORT(0x2E8, 3, COM4_FLAGS),
- { },
-};
-
-static struct platform_device x86_com_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = x86_com_data,
- },
-};
-
-static int force_legacy_probe;
-module_param_named(force, force_legacy_probe, bool, 0);
-MODULE_PARM_DESC(force, "Force legacy serial port probe");
-
-static int __init serial8250_x86_com_init(void)
-{
- if (pnp_platform_devices && !force_legacy_probe)
- return -ENODEV;
-
- return platform_device_register(&x86_com_device);
-}
-
-module_init(serial8250_x86_com_init);
-
-MODULE_AUTHOR("Bjorn Helgaas");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module");
diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c
index ff4ee6f..6deb159 100644
--- a/arch/i386/kernel/sysenter.c
+++ b/arch/i386/kernel/sysenter.c
@@ -336,7 +336,9 @@ struct vm_area_struct *get_gate_vma(struct task_struct *tsk)
int in_gate_area(struct task_struct *task, unsigned long addr)
{
- return 0;
+ const struct vm_area_struct *vma = get_gate_vma(task);
+
+ return vma && addr >= vma->vm_start && addr < vma->vm_end;
}
int in_gate_area_no_task(unsigned long addr)
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 29617ae..fdab077 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -57,8 +57,8 @@ cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
cflags-y += -maccumulate-outgoing-args
# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
# is .cfi_signal_frame supported too?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index de1de8a..4d94c51 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary.o tce.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
-obj-$(CONFIG_SERIAL_8250) += legacy_serial.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
obj-$(CONFIG_X86_VSMP) += vsmp.o
@@ -50,7 +49,6 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0
therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o
bootflag-y += ../../i386/kernel/bootflag.o
-legacy_serial-y += ../../i386/kernel/legacy_serial.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 1fab487..c63fc64 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -326,8 +326,7 @@ NEXT_PAGE(level2_kernel_pgt)
/* 40MB kernel mapping. The kernel code cannot be bigger than that.
When you change this change KERNEL_TEXT_SIZE in page.h too. */
/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
- PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
- KERNEL_TEXT_SIZE/PMD_SIZE)
+ PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
/* Module mapping starts here */
.fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c
index 902c287..361ebe6 100644
--- a/drivers/acpi/events/evgpeblk.c
+++ b/drivers/acpi/events/evgpeblk.c
@@ -586,6 +586,10 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
if (gpe_xrupt->previous) {
gpe_xrupt->previous->next = gpe_xrupt->next;
+ } else {
+ /* No previous, update list head */
+
+ acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next;
}
if (gpe_xrupt->next) {
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 1285e91..002bb33 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -211,14 +211,17 @@ void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags)
* DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
* Performs validation on some important FADT fields.
*
+ * NOTE: We create a local copy of the FADT regardless of the version.
+ *
******************************************************************************/
void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
{
/*
- * Check if the FADT is larger than what we know about (ACPI 2.0 version).
- * Truncate the table, but make some noise.
+ * Check if the FADT is larger than the largest table that we expect
+ * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue
+ * a warning.
*/
if (length > sizeof(struct acpi_table_fadt)) {
ACPI_WARNING((AE_INFO,
@@ -227,10 +230,12 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
sizeof(struct acpi_table_fadt)));
}
- /* Copy the entire FADT locally. Zero first for tb_convert_fadt */
+ /* Clear the entire local FADT */
ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
+ /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */
+
ACPI_MEMCPY(&acpi_gbl_FADT, table,
ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
@@ -251,7 +256,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* RETURN: None
*
* DESCRIPTION: Converts all versions of the FADT to a common internal format.
- * -> Expand all 32-bit addresses to 64-bit.
+ * Expand all 32-bit addresses to 64-bit.
*
* NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt),
* and must contain a copy of the actual FADT.
@@ -292,8 +297,23 @@ static void acpi_tb_convert_fadt(void)
}
/*
- * Expand the 32-bit V1.0 addresses to the 64-bit "X" generic address
- * structures as necessary.
+ * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
+ * should be zero are indeed zero. This will workaround BIOSs that
+ * inadvertently place values in these fields.
+ *
+ * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
+ * offset 45, 55, 95, and the word located at offset 109, 110.
+ */
+ if (acpi_gbl_FADT.header.revision < 3) {
+ acpi_gbl_FADT.preferred_profile = 0;
+ acpi_gbl_FADT.pstate_control = 0;
+ acpi_gbl_FADT.cst_control = 0;
+ acpi_gbl_FADT.boot_flags = 0;
+ }
+
+ /*
+ * Expand the ACPI 1.0 32-bit V1.0 addresses to the ACPI 2.0 64-bit "X"
+ * generic address structures as necessary.
*/
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
target =
@@ -349,18 +369,6 @@ static void acpi_tb_convert_fadt(void)
acpi_gbl_FADT.xpm1a_event_block.space_id;
}
-
- /*
- * For ACPI 1.0 FADTs, ensure that reserved fields (which should be zero)
- * are indeed zero. This will workaround BIOSs that inadvertently placed
- * values in these fields.
- */
- if (acpi_gbl_FADT.header.revision < 3) {
- acpi_gbl_FADT.preferred_profile = 0;
- acpi_gbl_FADT.pstate_control = 0;
- acpi_gbl_FADT.cst_control = 0;
- acpi_gbl_FADT.boot_flags = 0;
- }
}
/******************************************************************************
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ca5229d..3400b3e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -399,7 +399,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
- { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 1e21c8c..c3e716e 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -585,6 +585,8 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
if ((err = device_create_file(dev, &dev_attr_alarms)))
goto error_remove_files;
+ if ((err = device_create_file(dev, &dev_attr_name)))
+ goto error_remove_files;
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index f85b48f..c95909c 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -740,9 +740,9 @@ store_sensor(struct device *dev, struct device_attribute *da,
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
show_sensor, store_sensor, 0);
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
- show_sensor, store_sensor, 0);
+ show_sensor, store_sensor, 1);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
- show_sensor, store_sensor, 0);
+ show_sensor, store_sensor, 2);
/* I2C devices get this name attribute automatically, but for ISA devices
we must create it by ourselves. */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index a361dba..4a7b5f4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3067,8 +3067,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
np->nic_poll_irq = np->irqmask;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
- printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
spin_unlock(&np->lock);
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
break;
}
@@ -3185,8 +3185,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
np->nic_poll_irq = np->irqmask;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
- printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
spin_unlock(&np->lock);
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
break;
}
@@ -3232,8 +3232,8 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data)
np->nic_poll_irq |= NVREG_IRQ_TX_ALL;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
- printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
spin_unlock_irqrestore(&np->lock, flags);
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
break;
}
@@ -3347,8 +3347,8 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data)
np->nic_poll_irq |= NVREG_IRQ_RX_ALL;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
- printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
spin_unlock_irqrestore(&np->lock, flags);
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
break;
}
}
@@ -3420,8 +3420,8 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data)
np->nic_poll_irq |= NVREG_IRQ_OTHER;
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
- printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
spin_unlock_irqrestore(&np->lock, flags);
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
break;
}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 5ec7752..84958c8 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2649,14 +2649,16 @@ rtl8169_interrupt(int irq, void *dev_instance)
rtl8169_check_link_status(dev, tp, ioaddr);
#ifdef CONFIG_R8169_NAPI
- RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event);
- tp->intr_mask = ~rtl8169_napi_event;
-
- if (likely(netif_rx_schedule_prep(dev)))
- __netif_rx_schedule(dev);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x taken in poll\n",
- dev->name, status);
+ if (status & rtl8169_napi_event) {
+ RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event);
+ tp->intr_mask = ~rtl8169_napi_event;
+
+ if (likely(netif_rx_schedule_prep(dev)))
+ __netif_rx_schedule(dev);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
}
break;
#else
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index fe01b96..d2646a8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -96,7 +96,7 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-static int idle_timeout = 0;
+static int idle_timeout = 100;
module_param(idle_timeout, int, 0);
MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
@@ -1234,6 +1234,8 @@ static int sky2_up(struct net_device *dev)
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+ netif_carrier_off(dev);
+
/* must be power of 2 */
sky2->tx_le = pci_alloc_consistent(hw->pdev,
TX_RING_SIZE *
@@ -1573,7 +1575,6 @@ static int sky2_down(struct net_device *dev)
/* Stop more packets from being queued */
netif_stop_queue(dev);
- netif_carrier_off(dev);
/* Disable port IRQ */
imask = sky2_read32(hw, B0_IMSK);
@@ -1625,6 +1626,8 @@ static int sky2_down(struct net_device *dev)
sky2_phy_power(hw, port, 0);
+ netif_carrier_off(dev);
+
/* turn off LED's */
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
@@ -1689,7 +1692,6 @@ static void sky2_link_up(struct sky2_port *sky2)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
netif_carrier_on(sky2->netdev);
- netif_wake_queue(sky2->netdev);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
@@ -1741,7 +1743,6 @@ static void sky2_link_down(struct sky2_port *sky2)
gma_write16(hw, port, GM_GP_CTRL, reg);
netif_carrier_off(sky2->netdev);
- netif_stop_queue(sky2->netdev);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
@@ -2064,6 +2065,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
if (!(status & GMR_FS_RX_OK))
goto resubmit;
+ if (status >> 16 != length)
+ goto len_mismatch;
+
if (length < copybreak)
skb = receive_copy(sky2, re, length);
else
@@ -2073,6 +2077,11 @@ resubmit:
return skb;
+len_mismatch:
+ /* Truncation of overlength packets
+ causes PHY length to not match MAC length */
+ ++sky2->net_stats.rx_length_errors;
+
error:
++sky2->net_stats.rx_errors;
if (status & GMR_FS_RX_FF_OV) {
@@ -2427,8 +2436,7 @@ static void sky2_err_intr(struct sky2_hw *hw, u32 status)
static int sky2_poll(struct net_device *dev0, int *budget)
{
struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
- int work_limit = min(dev0->quota, *budget);
- int work_done = 0;
+ int work_done;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
if (unlikely(status & Y2_IS_ERROR))
@@ -2440,18 +2448,25 @@ static int sky2_poll(struct net_device *dev0, int *budget)
if (status & Y2_IS_IRQ_PHY2)
sky2_phy_intr(hw, 1);
- work_done = sky2_status_intr(hw, work_limit);
- if (work_done < work_limit) {
- netif_rx_complete(dev0);
+ work_done = sky2_status_intr(hw, min(dev0->quota, *budget));
+ *budget -= work_done;
+ dev0->quota -= work_done;
- /* end of interrupt, re-enables also acts as I/O synchronization */
- sky2_read32(hw, B0_Y2_SP_LISR);
- return 0;
- } else {
- *budget -= work_done;
- dev0->quota -= work_done;
+ /* More work? */
+ if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX))
return 1;
+
+ /* Bug/Errata workaround?
+ * Need to kick the TX irq moderation timer.
+ */
+ if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+ sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
+ netif_rx_complete(dev0);
+
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ return 0;
}
static irqreturn_t sky2_intr(int irq, void *dev_id)
@@ -3486,10 +3501,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- /* device is off until link detection */
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
return dev;
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 315ea99..a288de5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -74,21 +74,17 @@ config SERIAL_8250_PCI
depends on SERIAL_8250 && PCI
default SERIAL_8250
help
- Say Y here if you have PCI serial ports.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_pci.
+ This builds standard PCI serial support. You may be able to
+ disable this feature if you only need legacy serial support.
+ Saves about 9K.
config SERIAL_8250_PNP
tristate "8250/16550 PNP device support" if EMBEDDED
depends on SERIAL_8250 && PNP
default SERIAL_8250
help
- Say Y here if you have serial ports described by PNPBIOS or ACPI.
- These are typically ports built into the system board.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_pnp.
+ This builds standard PNP serial support. You may be able to
+ disable this feature if you only need legacy serial support.
config SERIAL_8250_HP300
tristate
diff --git a/fs/jffs2/write.c b/fs/jffs2/write.c
index c9fe0ab..1b68a52 100644
--- a/fs/jffs2/write.c
+++ b/fs/jffs2/write.c
@@ -553,6 +553,9 @@ int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f,
struct jffs2_full_dirent **prev = &dir_f->dents;
uint32_t nhash = full_name_hash(name, namelen);
+ /* We don't actually want to reserve any space, but we do
+ want to be holding the alloc_sem when we write to flash */
+ down(&c->alloc_sem);
down(&dir_f->sem);
while ((*prev) && (*prev)->nhash <= nhash) {
diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
index b9c2548..7ef3862 100644
--- a/include/asm-avr32/atomic.h
+++ b/include/asm-avr32/atomic.h
@@ -101,7 +101,7 @@ static inline int atomic_sub_unless(atomic_t *v, int a, int u)
" mov %1, 1\n"
"1:"
: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
- : "m"(v->counter), "rKs21"(a), "rKs21"(u)
+ : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
: "cc", "memory");
return result;
@@ -137,7 +137,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
" mov %1, 1\n"
"1:"
: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
- : "m"(v->counter), "r"(a), "ir"(u)
+ : "m"(v->counter), "r"(a), "ir"(u), "1"(result)
: "cc", "memory");
}
diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h
index 57a4306..bd67480 100644
--- a/include/asm-i386/serial.h
+++ b/include/asm-i386/serial.h
@@ -11,3 +11,19 @@
* megabits/second; but this requires the faster clock.
*/
#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
+ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
index 8ebd765..b0496e0 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86_64/serial.h
@@ -11,3 +11,19 @@
* megabits/second; but this requires the faster clock.
*/
#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
+ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index a3b7854..a686590 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -709,7 +709,8 @@ static void mark_nosave_pages(struct memory_bitmap *bm)
region->end_pfn << PAGE_SHIFT);
for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++)
- memory_bm_set_bit(bm, pfn);
+ if (pfn_valid(pfn))
+ memory_bm_set_bit(bm, pfn);
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
